Sponsored Content
The Lounge What is on Your Mind? Your site has been switched to Mobile First Indexing Post 303038718 by Neo on Thursday 12th of September 2019 04:37:34 AM
Old 09-12-2019
Quote:
Originally Posted by Akshay Hegde
Ok I am attaching, many parameters are commented thats why I posted only parameters which I override at the end.
Thanks. I just wanted to see the different with the overall conf files in general; but I agree the first list you sent was the core changes to consider adding to the file, after looking at the overall files and comparing.

Will look more closely this weekend as our datacenter provider seems to be having some network issues today and so will delay working on changes until the datacenter network is more stable.

Thanks again, Akshay!
 

8 More Discussions You Might Find Interesting

1. IP Networking

port access to site to site VPN

Setup a site to site VPN between two cisco routers. One of the site locations is unable to access ports such as https://example.com:9001 How do I let them go into port 9001? They can ssh, ftp, telnet and everything else. Is this a VPN issue or ACL access issue? I put permit ip host... (0 Replies)
Discussion started by: photon
0 Replies

2. Shell Programming and Scripting

indexing a file

hello guys, I have a file like this: input.dat Push-to-talk No Coonection IP support Support for IP telephony Yes Built-in SIP stack Yes Support via software Yes Microsoft Support for Microsoft Exchange Yes UMA (5 Replies)
Discussion started by: Johanni
5 Replies

3. IP Networking

How to establish site to site vpn - Linux machine and cisco asa?

Hi, I am trying to establish vpn between my linux server and cisco asa at client side. I installed openswan on my cent os. Linux Server eth0 - 182.2.29.10 Gateway - 182.2.29.1 eth1 - 192.9.200.75 I have simple IPtables Like WAN="eth0" LAN="eth1" (0 Replies)
Discussion started by: ashokvpp
0 Replies

4. IP Networking

Does cisco 1921 router support site to site VPNs using IPSec?

Q: "Does Cisco 1921 router support,, act as an endpoint for, site to site VPNs using IPSec? If so, how many? " A: If you get the Cisco 1921/k9 with the security services bundle then it will have built in security features. Cisco, typically includes IP Sec tunnels I believe as part of that... (0 Replies)
Discussion started by: Ayaerlee
0 Replies

5. IP Networking

IPSec Openswan Site to Site VPN - Big Pain

Hi @all, I try to connect 2 LANs with IPSec/Openswan LAN 1: 192.168.0.0/24 LAN 2: 192.168.1.0/24 This is my Config: conn HomeVPN # # Left security gateway, subnet behind it, nexthop toward right. left=192.168.1.29 ... (1 Reply)
Discussion started by: bahnhasser83
1 Replies

6. IP Networking

Node switched itself from static to DHCP on reboot issue

I'm trying to figure out what circumstances would cause an Open Solaris 11.2 host to switch itself from a static to a DHCP ip address upon reboot. This has only happened once but is a cause for some concern as this machine will be part of a web server pool. Nothing has changed on the LAN that... (2 Replies)
Discussion started by: SmokeyJoe
2 Replies

7. What is on Your Mind?

New UNIX.COM Mobile Site Icons

Having given up for the time being with a very difficult game engine project to virtualizing cyberspace, am working on the forums again. Just updated a few icons on the mobile site. Explanations in the picture captions: https://www.unix.com/members/1-albums214-picture855.jpeg ... (1 Reply)
Discussion started by: Neo
1 Replies

8. What is on Your Mind?

Mobile Thanks Now Visible in Mobile

Hey, I have enable post thanks (viewing thanks, not yet giving thanks) in mobile: https://www.unix.com/members/1-albums214-picture1018.jpeg I plan to also add the button to "give thanks on mobile. In addition, I will change the formatting (color and justification) of this new mobile... (1 Reply)
Discussion started by: Neo
1 Replies
NETWORKD.CONF(5)						   networkd.conf						  NETWORKD.CONF(5)

NAME
networkd.conf, networkd.conf.d - Global Network configuration files SYNOPSIS
/etc/systemd/networkd.conf /etc/systemd/networkd.conf.d/*.conf /lib/systemd/networkd.conf.d/*.conf DESCRIPTION
These configuration files control global network parameters. Currently the DHCP Unique Identifier (DUID). CONFIGURATION DIRECTORIES AND PRECEDENCE
The default configuration is defined during compilation, so a configuration file is only needed when it is necessary to deviate from those defaults. By default, the configuration file in /etc/systemd/ contains commented out entries showing the defaults as a guide to the administrator. This file can be edited to create local overrides. When packages need to customize the configuration, they can install configuration snippets in /usr/lib/systemd/*.conf.d/. Files in /etc/ are reserved for the local administrator, who may use this logic to override the configuration files installed by vendor packages. The main configuration file is read before any of the configuration directories, and has the lowest precedence; entries in a file in any configuration directory override entries in the single configuration file. Files in the *.conf.d/ configuration subdirectories are sorted by their filename in lexicographic order, regardless of which of the subdirectories they reside in. When multiple files specify the same option, for options which accept just a single value, the entry in the file with the lexicographically latest name takes precedence. For options which accept a list of values, entries are collected as they occur in files sorted lexicographically. It is recommended to prefix all filenames in those subdirectories with a two-digit number and a dash, to simplify the ordering of the files. To disable a configuration file supplied by the vendor, the recommended way is to place a symlink to /dev/null in the configuration directory in /etc/, with the same filename as the vendor configuration file. [DHCP] SECTION OPTIONS This section configures the DHCP Unique Identifier (DUID) value used by DHCP protocol. DHCPv6 client protocol sends the DHCP Unique Identifier and the interface Identity Association Identifier (IAID) to a DHCP server when acquiring a dynamic IPv6 address. DHCPv4 client protocol sends IAID and DUID to the DHCP server when acquiring a dynamic IPv4 address if ClientIdentifier=duid. IAID and DUID allows a DHCP server to uniquely identify the machine and the interface requesting a DHCP IP. To configure IAID and ClientIdentifier, see systemd.network(5). The following options are understood: DUIDType= Specifies how the DUID should be generated. See RFC 3315[1] for a description of all the options. The following values are understood: vendor If "DUIDType=vendor", then the DUID value will be generated using "43793" as the vendor identifier (systemd) and hashed contents of machine-id(5). This is the default if DUIDType= is not specified. link-layer-time, link-layer, uuid Those values are parsed and can be used to set the DUID type field, but DUID contents must be provided using DUIDRawData=. In all cases, DUIDRawData= can be used to override the actual DUID value that is used. DUIDRawData= Specifies the DHCP DUID value as a single newline-terminated, hexadecimal string, with each byte separated by ":". The DUID that is sent is composed of the DUID type specified by DUIDType= and the value configured here. The DUID value specified here overrides the DUID that systemd-networkd generates using the machine-id from the /etc/machine-id file. To configure DUID per-network, see systemd.network(5). The configured DHCP DUID should conform to the specification in RFC 3315[2], RFC 6355[3]. To configure IAID, see systemd.network(5). Example 1. A DUIDType=vendor with a custom value DUIDType=vendor DUIDRawData=00:00:ab:11:f9:2a:c2:77:29:f9:5c:00 This specifies a 14 byte DUID, with the type DUID-EN ("00:02"), enterprise number 43793 ("00:00:ab:11"), and identifier value "f9:2a:c2:77:29:f9:5c:00". SEE ALSO
systemd(1), systemd.network(5), machine-id(1) NOTES
1. RFC 3315 https://tools.ietf.org/html/rfc3315#section-9 2. RFC 3315 http://tools.ietf.org/html/rfc3315#section-9 3. RFC 6355 http://tools.ietf.org/html/rfc6355 systemd 237 NETWORKD.CONF(5)
All times are GMT -4. The time now is 07:49 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy