Please post the code you are currently running to "print" these files, because it is not clear what you are trying do accomplish.
I posted the code
--- Post updated at 09:14 PM ---
Quote:
Originally Posted by MadeInGermany
It's really not clear.
If you want to view the two files side by side, then I recommend MidnightCommander (mc).
To print the files side by side, you can try
With paste, how could I print 1 file first then have another file print on the side of it, printing against file 1? I want the second file to print down file 1 side by side by on the same line.
Need shell script to read two file at same time and print output in single file
Example I have two files 1) file1.txt 2) file2.txt
File1.txt contains
Aaa
Bbb
Ccc
Ddd
Eee
Fff
File2.txt contains
Zzz
Yyy
Xxx (10 Replies)
So basically what I want to do is pull out DNA sequences for a particular gene name.
I have 2 files (FILE1 and FILE2) and I want an output into a separate file (FILE3).
FILE1 and 2 are MASSIVE so I am only posting examples from each file.
So FILE1 looks like this (tab deliminted, 4... (3 Replies)
Hi all,
I have a script that is monitoring a hot folder. This script works fine with one exception when the script is executed while a file is being copied to the hot folder.
What is the easiest method to check if the copy file is completed? I'd like to get the solution in bash :) (8 Replies)
i have 3 files as below:
i want to print 1st,2nd,5th and 10th filed of 1st to 5th lines from each files into a line of an output file, so the result would be:
:
{line1}(field 1 of line 1 from file 1)(field 2 of line 1 from file 1)(field 5 of line 1 from file 1)(field 10 of line 1 from file... (1 Reply)
I am connecting to a device using telnet, I want my script to perform certain commands : ie- show device , show inventory..etc and write the output it sees from the terminal to a file.
this is what I have got :
#!/usr/bin/expect --
set running 1
spawn telnet <ip address>
expect ... (1 Reply)
this is the requirement
list.txt
table1
table2
table3
testfile.txt
name#place#data#select * from table1
name2#place2#data2#select * from table 10 innerjoin table3
name2#place2#data2#select * from table 10
output
name place table1
name2 place table3
i tried using awk (7 Replies)
Hello,
I need a program that read a file line by line and prints out lines 1, 2 & 3 after an empty line... An example of entries in the file would be:
SRVXPAPI001 ERRO JUN24 07:28:34 1775
REASON= 0000, PROCID= #E506 #1065: TPCIPPR, INDEX= 003F
... (8 Replies)
hi guys, i want help... Reding XML file and print the values into the text file using linux shell script file as per below xml file
<sequence>
<Filename>aldorzum.doc</Filename>
<DivisionCode>US</DivisionCode>
<ContentType>Template</ContentType>
<ProductCode>VIMZIM</ProductCode>
</sequence>... (4 Replies)
I have files named with different prefixes. From each I want to extract the first line containing a specific string, and then print that line along with the prefix.
I've tried to do this with a while loop, but instead of printing the prefix I print the first line of the file twice.
Files:... (3 Replies)
Discussion started by: pathunkathunk
3 Replies
LEARN ABOUT OSF1
sdiff
sdiff(1) General Commands Manual sdiff(1)NAME
sdiff - Compares two files and displays the differences in a side-by-side format
SYNOPSIS
sdiff [-l | -s] [-w number] [-o output_file] file1 file2
The sdiff command reads file1 and file2, uses diff to compare them, and writes the results to standard output in a side-by-side format.
OPTIONS
Displays only the left side when lines are identical. Creates a third file, output_file, by a controlled interactive line-by-line merging
of file1 and file2. The following subcommands govern the creation of this file: Adds the left side to output_file. Adds the right side to
output_file. Stops displaying identical lines. Begins displaying identical lines. Enters ed with the left side, the right side, both
sides, or an empty file, respectively.
Each time you exit from ed, sdiff writes the resulting edited file to the end of output_file. If you fail to save the changes
before exiting, sdiff writes the initial input to output_file. Exits the interactive session. Suppresses display of identical
lines. Sets the width of the output line to number (130 characters by default).
DESCRIPTION
The sdiff command displays each line of the two files with a series of spaces between them if the lines are identical, a < (left angle
bracket) in the field of spaces if the line only exists in file1, a > (right angle bracket) if the line only exists in file2, and a | (ver-
tical bar) for lines that are different.
When you specify the -o option, sdiff produces a third file by merging file1 and file2 according to your instructions.
Note that the sdiff command invokes the diff -b command to compare two input files. The -b option causes the diff command to ignore trail-
ing spaces, tab characters, and consider other strings of spaces as equal.
EXAMPLES
To print a comparison of two files, enter: sdiff chap1.bak chap1
This displays a side-by-side listing that compares each line of chap1.bak and chap1. To display only the lines that differ, enter:
sdiff -s-w 80 chap1.bak chap1
This displays the differences at the tty. The -w 80 sets page width to 80 columns. The -s option tells sdiff not to display lines
that are identical in both files. To selectively combine parts of two files, enter: sdiff -s-w 80 -o chap1.combo chap1.bak
chap1
This combines chap1.bak and chap1 into a new file called chap1.combo. For each group of differing lines, sdiff asks you which group
to keep or whether you want to edit them using ed.
SEE ALSO
Commands: diff(1), ed(1)sdiff(1)