I've successfully transplanted an IBM xSeries drive to a P520:
Source drive was a 146G FRU 39R7342.
AIX sees it as:
I had an extra 520 sitting about with no drives. It was going in the junk heap so I thought 'why not'. Don't recall how long I ran it, but it was non-productive use. I recall getting AIX to install was a bit of a problem. I swapped in a good Power drive that we yet to have crushed to run AIX from, then I could create a vg/lv/fs on the transplanted drive. I would not TRUST any data on it, but know that it is possible! What you will want to watch out for is the SAS type, the P520 using 3g SAS, but if you have an IO drawer its not uncommon to have SCSI drives for the expansion. Page 15 of the redbook Neo posted above have the feature codes (yes, I still have some p520's in productive use) that are authorized.
I no longer have that system running and it went to the recycle some years ago. I was excited at the time I had to email my other AIX team member for the 'check this out' factor. That's how I know all the gory details of the transplant! Oh, this was in a 8203 frame by the way.
These 2 Users Gave Thanks to RecoveryOne For This Post:
:confused: Im as newbie as they come.......
I just loaded Red Hat 8.0 on my computer. I have a second hard drive that i reformatted with a Fat32 so I could share it with my XP and Linux partions....... I have like 4000 mp3's on it and i would like to get it to auto mount when Linux boots....?
Or... (5 Replies)
Hello, earlier tonight I was installing BETA version of Mandrake Linux 9.0 and I realised I needed to partition my drive. I tried making the partition within mandrake but ther wasnt an option within the mandrake setup. So i go into my WindowsXP and do the disk management option but there want a... (5 Replies)
I trying to learn Unix and I am using SCO Unixware 7.1. Below are three question that I have:
1) Can someone tell me what command I can use to find out the system processor speed.
2) Can someone tell me what command I can use to find out what's the hard drive size of my unix box.
3) Can... (1 Reply)
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Good day,
I have an rs/6000 server, model 7044-270. I bought a 2nd hard drive for it but im not sure its the right one. (fru:H13060) As you surely know, the 7044-270 hard drives are put in some sort of tray/carrier. There is a cable that will interface the HDD with the tray/carrier so the... (0 Replies)
Hi
When I installed opensolaris, I installed it on a 20GB partition. How do I make use of the other 300GB I have spare?
format shows:-
-bash-3.2# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c3d0 <DEFAULT cyl 2607 alt 2 hd 255 sec 63>
... (12 Replies)
I am running FC-7 which I realize is an older distro. But my question would apply to any distro.
I ran fsck on my mounted file system (I know, I shouldn't have). Now it won't boot. I get a kernel panic message.
I booted to a Knoppix Live Cd.
The desktop icon shows /dev/sda2 mounted at... (4 Replies)
Im trying to install a fresh version of Fedora 17. I keep getting formating errors when trying to reformat the hard drive. I recieve errors as well I I try to use the entire disk for the install instead of creat new partitions from scratch. I even tried fromatting the disk using PartedMagic and... (7 Replies)
Discussion started by: Fingerz
7 Replies
LEARN ABOUT DEBIAN
mfontset_lookup
mfontset_lookup(3m17n) The m17n Library mfontset_lookup(3m17n)NAME
mfontset_lookup - Lookup a fontset.
SYNOPSIS
MPlist * mfontset_lookup (MFontset * fontset, MSymbol script, MSymbol language, MSymbol charset)
DESCRIPTION
Lookup a fontset. The mfontset_lookup() function lookups fontset and returns a plist that describes the contents of fontset corresponding
to the specified script, language, and charset.
If script is Mt, keys of the returned plist are script name symbols for which some fonts are specified and values are NULL.
If script is a script name symbol, the returned plist is decided by language.
o If language is Mt, keys of the plist are language name symbols for which some fonts are specified and values are NULL. A key may be Mt
which means some fallback fonts are specified for the script.
o If language is a language name symbol, the plist is a FONT-GROUP for the specified script and language. FONT-GROUP is a plist whose keys
are FLT (FontLayoutTable) name symbols (Mt if no FLT is associated with the font) and values are pointers to MFont.
o If language is Mnil, the plist is fallback FONT-GROUP for the script.
If script is Mnil, the returned plist is decided as below.
o If charset is Mt, keys of the returned plist are charset name symbols for which some fonts are specified and values are NULL.
o If charset is a charset name symbol, the plist is a FONT-GROUP for the charset.
o If charset is Mnil, the plist is a fallback FONT-GROUP.
RETURN VALUE
It returns a plist describing the contents of a fontset. The plist should be freed by m17n_object_unref().
COPYRIGHT
Copyright (C) 2001 Information-technology Promotion Agency (IPA)
Copyright (C) 2001-2011 National Institute of Advanced Industrial Science and Technology (AIST)
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License
<http://www.gnu.org/licenses/fdl.html>.
Version 1.6.2 12 Jan 2011 mfontset_lookup(3m17n)