Hi,
I have a shared AIX wpar configured.
I have started snmpd process on shared AIX wpar.
But when i tried to query a MIB id using the following command
/opt/OV/bin/snmpget -d -v 1 -c public -p <hostname> .1.3.6.1.2.1.1.7.0
i get the following error message
#... (0 Replies)
im kinda new to shell scripting so i need some help
i try to run this script and get the error code
> 5 ")syntax error: operand expected (error token is "
the code for the script is
#!/bin/sh
#
# script to see if the given value is correct
#
# Define errors
ER_AF=86 # Var is... (4 Replies)
Hello,
We have a system running AIX 6.1.7.1. We have created a Workload Partition(wpar) on this system with wpar specific routing enabled.
On wpar, we are running DNS (UDP/53) and syslog (UDP/514).
en0: 1.1.1.1/255.255.255.0 NOT assigned to any wpar
en1:... (0 Replies)
seems to be WPAR is quite easy to set up..without additional licenses..
If I don't need Linux and all my legacy and new apps are happy in AIX 7.1 (the latest OS), I could save all troubles and use WPAR.
Can someone comment on this ??
One copy of OS to maintain, so to speak..
... (4 Replies)
Hi All,
This is for WPAR monitoring shell script, earlier opened thread was closed, had to open a new thread, as suggested I have used script as below, But am trying to get the output in below format, need suggestions with it. Below is the lswpar output, required output format.
... (7 Replies)
Hi.
I've setup a wpar on aix
mkwpar -h ibmunix2 -i -r -N interface=en0 address=10.6.0.1 netmask=255.255.255.0 -n ibmunix2
When i log into ibmunix2 it can't ping any external host,include the ibm host.
How to set route for network please?
I've set ibmunix2 with a different subnet.
... (7 Replies)
Anyone running CICS TX in a WPAR ?
In my attempts to run CICS TX 5.1.0.1 in a WPAR..... CICS fails to start due to unable to load a CICS IPC Kernel Extension. The Kernel Extension is 64 bit (so not a 32 vs 64 bit issue).
Base system/LPAR is Power8 and AIX 7.1 TL3 SP5. WPAR is versioned... (4 Replies)
AIX 7.1
New to WPAR, hopefully just missing something simple here.
Creating the WPAR like this.....
(The box where the WPAR is hosted does have an iscsi protocol device)
mkwpar -h wpar08 -l -n wpar08 -N interface=en0 address=xxx.xx.xx.xxx netmask=255.255.255.0 -D devname=/dev/iscsi0 -D... (0 Replies)
Discussion started by: TomR
0 Replies
LEARN ABOUT DEBIAN
rancid
rancid(1) General Commands Manual rancid(1)NAME
rancid - Cisco configuration filter
SYNOPSIS
rancid [-dlV] (-f filename | hostname)
DESCRIPTION
rancid is a perl(1) script which uses the login scripts (see clogin(1)) to login to a device, execute commands to display the
configuration, etc, then filters the output for formatting, security, and so on. rancid's product is a file with the name of it's last
argument plus the suffix .new. For example, hostname.new.
There are complementary scripts for other platforms and/or manufacturers that are supported by rancid(1). Briefly, these are:
agmrancid Cisco Anomaly Guard Module (AGM)
arancid Alteon WebOS switches
arrancid Arista Networks devices
brancid Bay Networks (nortel)
cat5rancid Cisco catalyst switches
cssrancid Cisco content services switches
erancid ADC-kentrox EZ-T3 mux
f10rancid Force10
f5rancid F5 BigIPs
fnrancid Fortinet Firewalls
francid Foundry and HP procurve OEMs of Foundry
hrancid HP Procurve Switches
htranicd Hitachi Routers
jerancid Juniper Networks E-series
jrancid Juniper Networks
mrancid MRTd
mrvrancid MRV optical switches
mtrancid Mikrotik routesrs
nrancid Netscreen firewalls
nsrancid Netscaler
nxrancid Cisco Nexus boxes
prancid Procket Networks
rivrancid Riverstone
rrancid Redback
srancid SMC switch (some Dell OEMs)
trancid Netopia sDSL/T1 routers
tntrancid Lucent TNT
xrancid Extreme switches
xrrancid Cisco IOS-XR boxes
zrancid Zebra routing software
The command-line options are as follows:
-V Prints package name and version strings.
-d Display debugging information.
-l Display somewhat less debugging information.
-f rancid should interpret the next argument as a filename which contains the output it would normally collect from the device (
hostname) with clogin(1).
SEE ALSO control_rancid(1), clogin(1), rancid.conf(5)CAVEATS
Cisco IOS offers a DHCP server that maintains a text database which can be stored remotely or on local storage. If stored locally, the
file changes constantly and causes constant diffs from rancid. If this file's name ('ip dhcp database') matches the regex
dhcp_[^[:space:].].txt, it will be filtered.
For Catalyst switches running CatOS, type cat5, the prompt must end with '>'. clogin(1) looks for '>' to determine when a login is
successful. For example:
cat5k>
cat5k> enable
Password:
cat5k> (enable)
rancid works on Cisco Catalyst 1900 series switches that are running Enterprise Edition software. This software provides a menu at
connection time that allows a command line interface to be used by entering 'K' at the prompt.
26 April 2011 rancid(1)