I would try to start all from scratch, that means remove using rmdev the device then
then see if it shows up correctly, ah vg01 was already present? so there might be a mismatch between what it knows of the group and so is looking for a disk that doesn't exist...
My idea would be to create a new vg just to see the disk works... then you could start meditating on how to re-create vg01... as I cannot help more, not having any HP for quite some time know, when here it was decided to drop PA-RISC... ( not my choice...) but remembered having sometimes issues of the sort with clusters...
Hi,
I wish to execute a simple perl script to pass unix commands on a HPUX platform, retrieve the result and filter through the text to determine outcomes x,y and z. I am developing the code on my windows system.
I initially wrote the code to issue UNIX commands line by line, however i soon... (1 Reply)
Hi
Reqmt: I am working on Sys 1 and passes a command to Sys2 using a utility which has ssh coded in it. Is there any way to get the process id of the command in Sys 2 from my Sys1 ? Note: The utility is not editable, so you cannot get it through it and I am not logged in in Sys2.
Thanks... (2 Replies)
Wellcomes All,
some times ago I 've installed a Debian ditribution on an Hard Disk who was set as Primary Master. Few days ago, I 've decided to install another Hard Disk with a different Operating System. When I did that, I turned off the old hard disk, and I mouted the new one on the Primary IDE... (1 Reply)
HPUX version B.11.23 as reported by uname -a
Start with default signal I believe is -15
#kill PID
Process still present.
#kill -9 PID
Process still present, even after repeated attempt and waiting.
PPID becomes 1 which is the init process
started at boot time.
So far only way to... (8 Replies)
I just added a new disk i suppose the disk is not supported by sun solaris pls can someone advice on what i can do.
pls see below:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1d0 <DEFAULT cyl 15934 alt 2 hd 255 sec 126>
... (6 Replies)
Hi,
I am new to solaris administration. I have scan the new EMC SAN disk. I am able to see the disk when i run the powermt display dev=all command o/p. I want to format the disk and add file system to that disk.
Can have formated the disk. and this the o/p of my format
bash-3.00# prtvtoc... (3 Replies)
First of all, forgive me if I come off as naive. Normally I'm doing day-to-day management of a Server 2008 network, so HP-UX isn't exactly my forte.
We have several HP 715/100 machines running UX 9.x, and recently one of them stopped being able to boot. In the boot menu the disk shows up with... (3 Replies)
Hello,
i try to add user john to secondary group, named groupB
this will add as primary group,
how can i add to secondary group??
dn: cn=groupB,ou=Groups,dc=ldap-server,dc=com
changetype: modify
add: memberuid
memberuid: john (1 Reply)
Discussion started by: prpkrk
1 Replies
LEARN ABOUT HPUX
vxdmp
vxdmp(7) Miscellaneous Information Manual vxdmp(7)NAME
vxdmp - Veritas Volume Manager multipathing disk devices
DESCRIPTION
Multipathed disk devices in Veritas Volume Manager (VxVM) represent virtual devices with one or more physical access paths to a physical
disk. The Multipathing feature provides disk access reliability by dynamically switching to another physical path if there is a path fail-
ure.
Every disk that is visible to VxVM is represented by a multipath device node in the /dev/vx/dmp and /dev/vx/rdmp directories for block type
and character type interfaces. A simple disk is represented by a multipath device having one physical path, whereas a disk that is part of
a multiported disk array is represented by a multipath device with many device access paths depending upon the type of the disk array.
VxVM uses standard disk device naming conventions to name multipath devices. For example, if there is a disk device with two physical
access paths such as c1t0d0 and c2t0d0, the multipathing device node for this particular disk is created under /dev/vx/dmp and /dev/vx/rdmp
as c1t0d0 or c2t0d0.
To provide multipathing, VxVM maintains an internal database of all the multipathed devices detected by the system and their respective
paths. The database is created at system boot time. When disks are added or removed from the system, VxVM provides support to reconfigure
the multipath device database to reflect new states of the hardware, while the system is online.
To reconfigure the DMP database, run ioscan followed by insf, and then invoke vxdctl enable (see vxdctl(1M)).
The various access paths to a multipathed device can be seen by using a vxdisk command (see vxdisk(1M)). These commands open the multi-
pathing configuration device /dev/vx/dmpconfig to obtain the required information about the various paths to a multipathed device and their
states.
VxVM also provides the facility to enable or disable a disk controller. This feature can be used to stop all I/Os through a particular con-
troller to perform maintenance operations on it. Use the vxdmpadm command to do this and also perform other operations on the multipath
device database.
VxVM can provide notification about events that occur in the DMP database due to a change in hardware. See the vxnotify(1M) man page for
more information.
VxVM is capable of multipathing both Active/Active and Active/Passive disk arrays.
FILES
/dev/vx/dmp Multipathing block devices.
/dev/vx/rdmp Multipathing character devices.
SEE ALSO ioctl(2), vxdctl(1M), vxdisk(1M), vxdmpadm(1M), vxnotify(1M)VxVM 5.0.31.1 24 Mar 2008 vxdmp(7)