Replaced pdisk not showing up in SAS Disk Array Configuration Post: 303036373

10 More Discussions You Might Find Interesting

1. Solaris

T5240 and Internal SAS RAID Configuration help

Dear Friends, I need to configure T5240 with Internal SAS RAID HBA(SG-XPCIESAS-R-INT-Z).. T5240 uses 8 hard disks... From the documents of RAID card I have found that I need to create a jump start server to include three packages SUNWaac, StorMan, SUNWgccruntime if Im using solaris10 5/08... ...

2. Solaris

3320 Disk Array Configuration for Oracle 10

We have a dual-controller StorEdge 3320 disk array with 5 disks (each 320 MB). Four disks have been set up in a RAID-5 configuration with the remaining disk acting as a hot spare. There is a single logical drive which has been partitioned into 3 slices. The disk array is to be simultaneously...

3. AIX

add SSA pdisk to array to become hdisk

May I know how can I add a new SSA pdisk into array and become usable hdisk? I have inserted a 36GB SSA disk into enclosure and done the "cfgmgr" and I can see it already been regconized as pdisk47. I would like to make it a system disk in order for me to add to my volume group. Please let me...

4. Solaris

Veritas not attaching replaced disk

Hi, I`m on SunFire480R with Solaris 10. Disk in rootdg group failed, so it was replaced. However, I cannot make Veritas initalise the replaced disk: # vxdctl enable # vxdisk list c1t0d0s2 Device: c1t0d0s2 devicetag: c1t0d0 type: auto flags: online error private autoconfig...

5. UNIX for Dummies Questions & Answers

find physical disk type : SAS / SATA

Hi, Is there an easy way to find the disk-type from the command line or with another api ? sdparm works for SAS but not for SATA, hdparm works for SATA but not SAS. Thanks

6. Ubuntu

Linux LVM.. Grub not loading from replaced disk

Hi, a little while ago, one of the GPT Partitioned hard disk had gone faulty in a Mirror RAID and is now successfully replaced. here is how I did that. 1) created identical partition table on the new disk. 2) attached the mirrors using md commands. The whole procedure is given...

7. Linux

Grub not loading from replaced disk

8. Red Hat

Udev Rule TAG for identifying a local sas disk, non-scsi, non-fiber, non-iscsi

I need to add a VMware virtual disk to the 99-oracle-asmdevices.rules file but the OS is not assigning a WWID to the disk. It has been fdisk'd and a single partition created. What TAG inside the file needs to be added? the Program scsi-id does not work for some reason. latest patches...

9. Filesystems, Disks and Memory

DISK ARRAY PROTECTION SUSPENDED message displayed following disk replacement

Hello, On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active. We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED. ...

10. AIX

Power machine 720 SAS disk

Hello, I would like to check how many SAS disks and its size per disk for the whole power system. As per my understanding, if we assign the SAS controller to LPAR, then we can see the disk in lpar smitty command. How can we check from the Power machine(physical ones) as well? I think the...

LEARN ABOUT HPUX

tsm.lpadmin

tsm.lpadmin(1M) 														   tsm.lpadmin(1M)

NAME

       tsm.lpadmin - add or remove a printer for use with tsm(1)

SYNOPSIS

       printer model

       printer

DESCRIPTION

       is  used  to add (or remove) a printer to the LP spooling system when the printer is connected to the system through a terminal running the
       Terminal Session Manager (see tsm(1)).  is a shell script that uses in the normal way but also creates a named pipe to which LP	output	is
       directed (see lpadmin(1)).  This named pipe is opened by TSM and data flowing from it is sent to the printer through the terminal.

   Options
       recognizes the following options:

	      Names a printer to be created with an associated pipe.
			     If is used, must also be specified.

	      Selects a model interface program for
			     printer.	model is one of the model interface names supplied with the LP software (see the Models topic in the lpad-
			     min(1)) manual entry.  If is used, must also be specified.

	      Removes	     printer from the LP system.  No other options are allowed with

   Restrictions
       To use you must be user or

AUTHOR

       was developed by HP.

FILES

SEE ALSO

       lpadmin(1M), tsm(1).

																   tsm.lpadmin(1M)