smitty tcpip --> Further configuration -->Network interface -->Network interface selection -->Configure alias
I have gone through this, but I don't see the alias IP. I think we have to put the alias IP here to remove. It's not already there for us to choose to remove
1 more question, in the linux we can edit the ifcfg-ethx to make some changes. So on AIX, which file can we do the same to make changes to IP configuration?
I need to delete a TTY in my AIX 4.3 system. I have tried using the smit but everytime I try it, there is a message telling me that the device is in use and cannot be changed. How do I take the device "offline", so to speak, so that I can edit the settings and/or delete it.
V/R
Djassi (3 Replies)
Hi All,
How can I find out which is ETH5 on my AIX P5 system. I have about seven different NIC card on this. I did move the cable to each one but still I was not able to see the link light up when I did netstat -v
Any idea?
Thanks. (2 Replies)
I couldn't install my nic in solaris 10. I compiled and added
the driver but failed to attach the driver and ifconfig output
shows only loopback dev. Please see the following output and tell
me whether my nic has been detected and why the driver failed to
attach?
My nic is detected in linux... (0 Replies)
Hi, I have the following packages installed on my AIX server
xlC.aix50.rte 10.1.0.2 COMMITTED XL C/C++ Runtime for AIX 5.3
xlC.cpp 9.0.0.0 COMMITTED C for AIX Preprocessor
xlC.msg.en_US.cpp 9.0.0.0 COMMITTED C for AIX Preprocessor
xlC.msg.en_US.rte 10.1.0.2 COMMITTED XL C/C++ Runtime
xlC.rte... (4 Replies)
Dear All
I want tune my NIC's rps, rfs and xps value.
In my system I have two NIC (eth0, eth1) and I have a bond0 ( eth0, eth1).
Here is the question? Which device should I modify ?
eth0 and eth1? or just modify bond0 or modify all device (eth0, eth1, bond0)
Any advice is welcome.... (0 Replies)
NIC port is down on IBM Frame. From the back its slot C7/C8. The network switch is the problem, and a new switch will be coming into play. There's one VIO and one LPAR.
How do i tell the port is down in the OS on the VIO? And how can i verify it's backup without pulling cables? We have a... (1 Reply)
Hello Admins,
My ask is how can I add two different subnet IPs to same box with two different gateways?
The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware.
How can I get connected... (4 Replies)
I have Xubuntu 18.04 installed on my PC. I have created a 10G .img image file created by QEMU-IMG. I have installed inside of it Solaris 9 SPARC edition . If I try and mount the image file as a loop device (using sudo losetup /dev/loop0 /path-to-img-file) I can only mount it as read only.
... (1 Reply)
Discussion started by: alphatron150
1 Replies
LEARN ABOUT SUSE
ifcfg-wireless
IFCFG(5) Network configuration IFCFG(5)NAME
ifcfg-wireless - wireless LAN network interface configuration
SYNOPSIS
/etc/sysconfig/network/ifcfg-wlan-*
/etc/sysconfig/network/ifcfg-type-wlan
GENERAL
Wireless networks need some additional configuration data compared to ethernet ones. Therefore additional variables for ifcfg files were
introduced. All wireless LAN specific variables are described in the ifcfg template file /etc/sysconfig/network/ifcfg.template. It is pos-
sible to configure more than one wireless network accepted for association. To achieve this add suffix _1 to all wireless variables for the
second network, _2 for the this, and so on. Example: WIRELESS_ESSID_1="second_net" You can have up to ten wireless networks configured.
Some wireless variables are not applicable to a single wireless network but are global to the interface. The description of the variable
points this out.
BUGS
Please report bugs at <http://www.suse.de/feedback>
AUTHOR
Christian Zoz <zoz@suse.de> -- ifup script
Michal Svec <msvec@suse.cz> -- ifup script
Bjoern Jacke -- ifup script
Mads Martin Joergensen <mmj@suse.de> -- ifup manual page
Michal Ludvig <mludvig@suse.cz> -- tunnel support
Joachim Gleissner <jg@suse.de> -- wireless support
SEE ALSO ifup(8).
sysconfig December 2005 IFCFG(5)