To clarify the situation I have a WIFI extender plugged into the domestic 240v mains wall socket. The device itself has been configured to be a bridge between my domestic ISP modem/router and any device that uses wifi. The wifi extender has 2 female RJ45 ethernet sockets on the deive to allow ethernet connection between the Wifi extender and the proposed machine (in this case my SPARC server. The Wifi extender connects to my Router box via wifi.
WhenI first installed Solaris 10 I had to install the ethernet port
Moderator's Comments:
Please wrap all code, files/data, input & output/errors in CODE tags.
It makes it easier to read and preserves multiple spaces for indenting or fixed-width data.
Code:
(ifconfig e1000g0 plumb up)
When this was done there was no IP address assigned to the e1000g0 device. So I had to assign an IP address that my router box could accept
Code:
ifconfig 192.168.0.22 netmask 255.255.255.0 broadcast + up
I shall rectify the /etc/hosts and the /etc/hostname.e1000g0 files. If this process fails I shall return back to you
I hope I have clarified myself more with this post!
Hi everyone, I just installed Solaris 10 in my PC. However, once I finished installing it, I lost my internet connection. When I switch to windows, the internet can run smoothly. Does anyone know how to set up internet connection in Solaris ? I am so sorry, I am new in UNIX (7 Replies)
I installed solaris 10 on my desktop pc, however it does not detect my internet connection. IM also running redhad and that detects it automatically, so i guess i have to go in manually and change something. Im new to all this however and i have no idea how to proceed. (5 Replies)
Hi,
Iam using BSNL broad band connection and i have installed two OS Xp & Sun solaris -x86 on my machine.Iam able to use INTERNET on windows Xp but not able to do it on solaris x86.
I have tried using DHCP concept as well as sys-unconfig command in solaris but no results.
When i use... (5 Replies)
Hi everyone,
I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Hi,
i am new bie on solaris ,i just installed it on vmware. i tryed to connect to the internet from solaris but it failed.
during the installation i ignore the DHCP and i assign a fixed ip address to the host.
is that has an impact on internet access ? and if so how to add another interface... (3 Replies)
I have a solaris 10 on my laptop. I want to let my internet work.
Command: ifconfig -a
Return:
lo: ...
e1000g0: ...
I dont know what else to setup so when I open firefox, I have access to internet. Can anyone show me how to do the setting? Thanks a lot. (1 Reply)
I have Xubuntu 18.04 installed on my PC. I have created a 10G .img image file created by QEMU-IMG. I have installed inside of it Solaris 9 SPARC edition . If I try and mount the image file as a loop device (using sudo losetup /dev/loop0 /path-to-img-file) I can only mount it as read only.
... (1 Reply)
Discussion started by: alphatron150
1 Replies
LEARN ABOUT DEBIAN
eql_enslave
eql_enslave(8) System Manager's Manual eql_enslave(8)NAME
eql_enslave - enslave a network interface with a master interface
SYNOPSIS
eql_enslave <master-name> <slave-name> <estimated-bps>
DESCRIPTION
eql_enslave enslaves a PPP or SLIP network interface to another, named master interface or eql device.
The MTU must match the MTU of your serial line device, otherwise, eql_enslave just fails when it is called. You have also to turn off Van-
Jacobson compression on your slave devices.
Once the eql device is configured, it will stay up and running until you shut it down manually or reboot. If you have the eql support com-
piled as a module then all you have to do is to remove the module after downing the interface.
Note that you have to connect to a terminal server capable of doing load balancing or another Linux box to use EQL.
EXAMPLES
# Client Side EQL Driver Initialization
ifconfig eql 192.168.1.2 netmask 255.255.255.0 mtu 1500
eql_enslave eql ppp0 33600
eql_enslave eql ppp1 14400
eql_enslave eql ppp2 28800
SEE ALSO ifconfig(8)AUTHOR
Written by Simon "Guru Aleph-Null" Janes, simon@ncm.com.
Manual page added by Roberto Lumbreras <rover@debian.org>.
eql_enslave(8)
05-11-2019
