To clarify the situation I have a WIFI extender plugged into the domestic 240v mains wall socket. The device itself has been configured to be a bridge between my domestic ISP modem/router and any device that uses wifi. The wifi extender has 2 female RJ45 ethernet sockets on the deive to allow ethernet connection between the Wifi extender and the proposed machine (in this case my SPARC server. The Wifi extender connects to my Router box via wifi.
WhenI first installed Solaris 10 I had to install the ethernet port
Moderator's Comments:
Please wrap all code, files/data, input & output/errors in CODE tags.
It makes it easier to read and preserves multiple spaces for indenting or fixed-width data.
Code:
(ifconfig e1000g0 plumb up)
When this was done there was no IP address assigned to the e1000g0 device. So I had to assign an IP address that my router box could accept
Code:
ifconfig 192.168.0.22 netmask 255.255.255.0 broadcast + up
I shall rectify the /etc/hosts and the /etc/hostname.e1000g0 files. If this process fails I shall return back to you
I hope I have clarified myself more with this post!
Hi everyone, I just installed Solaris 10 in my PC. However, once I finished installing it, I lost my internet connection. When I switch to windows, the internet can run smoothly. Does anyone know how to set up internet connection in Solaris ? I am so sorry, I am new in UNIX (7 Replies)
I installed solaris 10 on my desktop pc, however it does not detect my internet connection. IM also running redhad and that detects it automatically, so i guess i have to go in manually and change something. Im new to all this however and i have no idea how to proceed. (5 Replies)
Hi,
Iam using BSNL broad band connection and i have installed two OS Xp & Sun solaris -x86 on my machine.Iam able to use INTERNET on windows Xp but not able to do it on solaris x86.
I have tried using DHCP concept as well as sys-unconfig command in solaris but no results.
When i use... (5 Replies)
Hi everyone,
I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Hi,
i am new bie on solaris ,i just installed it on vmware. i tryed to connect to the internet from solaris but it failed.
during the installation i ignore the DHCP and i assign a fixed ip address to the host.
is that has an impact on internet access ? and if so how to add another interface... (3 Replies)
I have a solaris 10 on my laptop. I want to let my internet work.
Command: ifconfig -a
Return:
lo: ...
e1000g0: ...
I dont know what else to setup so when I open firefox, I have access to internet. Can anyone show me how to do the setting? Thanks a lot. (1 Reply)
I have Xubuntu 18.04 installed on my PC. I have created a 10G .img image file created by QEMU-IMG. I have installed inside of it Solaris 9 SPARC edition . If I try and mount the image file as a loop device (using sudo losetup /dev/loop0 /path-to-img-file) I can only mount it as read only.
... (1 Reply)
Discussion started by: alphatron150
1 Replies
LEARN ABOUT DEBIAN
vlan-interfaces
VLAN-INTERFACES(5) File formats VLAN-INTERFACES(5)NAME
/etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format
DESCRIPTION
/etc/network/interfaces contains network interface configuration information for the ifup(8) and ifdown(8) commands. This manpage
describes the vlan extensions to the standard interfaces(5) file format.
Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which are gener-
ally needed when using (a lot of) vlans.
VLAN CREATION
Vlan interface definitions exist of the vlan interface name, and an optional 'raw-device' parameter. Vlan interfaces are numbered 1 to
4095. You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero. The following
example shows four ways to create a vlan with id 1 on interface eth0. They all result in different names.
iface eth0.1 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan1 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
iface eth0.0001 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan0001 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
# We don't have br support out of the box
iface br0.2 inet static
vlan-raw-device br0
address 192.168.1.1
netmask 255.255.255.0
# Aliases are ignored
iface br0.2:1 inet static
address 192.168.1.1
netmask 255.255.255.255
EXTRA IFACE OPTIONS
Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.
vlan-raw-device devicename
Indicates the device to create the vlan on. This is ignored when the devicename is part of the vlan interface name.
ip-proxy-arp 0|1
Turn proxy-arp off or on for this specific interface. This also works on plain ethernet like devices.
ip-rp-filter 0|1|2
Set the return path filter for this specific interface. This also works on plain ethernet like devices.
hw-mac-address mac-address
This sets the mac address of the interface before bringing it up. This works on any device that allows setting the hardware address
with the ip command.
AUTHOR
This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>
SEE ALSO vconfig(8)interfaces(5)vlan September 30 2007 VLAN-INTERFACES(5)
05-11-2019
