Sponsored Content
Operating Systems Solaris Fibre Channel link not ready on Netra 240 Post 303034469 by solaris_1977 on Friday 26th of April 2019 01:19:36 PM
Old 04-26-2019
Yes, still giving same errors
Code:
{1} ok sc>
sc> setalarm critical off
sc> console -f
Warning: User <auto> currently has write permission to this console and forcibly removing them will terminate any current write actions and all work will be lost.  Would you like to continue? [y/n]y
Enter #. to return to ALOM.

{1} ok obdiag
Searching for selftest methods: network network flashprom rtc i2c serial serial rmc-comm ide SUNW,qlc SUNW,qlc scsi scsi network network network network network network
 _____________________________________________________________________________
|                                 o b d i a g                                 |
|_________________________ _________________________ _________________________|
|                         |                         |                         |
|  1 SUNW,qlc@2           |  2 SUNW,qlc@3           |  3 flashprom@2,0        |
|  4 i2c@0,320            |  5 ide@d                |  6 network@0            |
|  7 network@1            |  8 network@2            |  9 network@2            |
| 10 network@2            | 11 network@2,1          | 12 network@2,1          |
| 13 network@3            | 14 rmc-comm@0,3e8       | 15 rtc@0,70             |
| 16 scsi@2               | 17 scsi@2,1             | 18 serial@0,2e8         |
| 19 serial@0,3f8         |                         |                         |
|_________________________|_________________________|_________________________|
|       Commands: test test-all except help what setenv set-default exit      |
|_____________________________________________________________________________|
|                   diag-passes=1 diag-level=max test-args=                   |
|_____________________________________________________________________________|

obdiag> test-all
Hit the spacebar to interrupt testing
Testing /pci@1e,600000/SUNW,qlc@2 Fibre Channel link not ready - Loss of Sync
Starting memory test - press any key to terminate test
HBA memory size - 131072 bytes
        Testing memory, pattern 1 /
        Testing memory, pattern 2 \
        Testing memory, pattern 3 /
        Testing memory, pattern 4 \
        Testing memory, pattern 5 /
        Testing memory, pattern 6 \
        Testing memory, pattern 7 /
        Testing memory, pattern 8 \
        Online Self-test Passed
        1-bit Internal Loopback  Test Passed
        10-bit Internal Loopback Test Passed
        External Loopback        Test Passed
Error: /pci@1e,600000/SUNW,qlc@2 selftest resulted in net stack depth change of -1
Selftest at /pci@1e,600000/SUNW,qlc@2 ................................. failed
Testing /pci@1e,600000/SUNW,qlc@3 Fibre Channel link not ready - Loss of Sync
Starting memory test - press any key to terminate test
HBA memory size - 131072 bytes
        Testing memory, pattern 1 /
        Testing memory, pattern 2 \
        Testing memory, pattern 3 /
        Testing memory, pattern 4 \
        Testing memory, pattern 5 /
        Testing memory, pattern 6 \
        Testing memory, pattern 7 /
        Testing memory, pattern 8 \
        Online Self-test Passed
        1-bit Internal Loopback  Test Passed
        10-bit Internal Loopback Test Passed
        External Loopback        Test Passed
Error: /pci@1e,600000/SUNW,qlc@3 selftest resulted in net stack depth change of -1
Selftest at /pci@1e,600000/SUNW,qlc@3 ................................. failed
Testing /pci@1e,600000/isa@7/flashprom@2,0 ............................ passed
Testing /pci@1e,600000/isa@7/i2c@0,320 ................................ passed
Testing /pci@1e,600000/ide@d .......................................... passed
Testing /pci@1d,700000/pci@1/pci@0/network@0 Register tests: passed
Internal loopback test: passed
/pci@1d,700000/pci@1/pci@0/network@0: Timed out waiting for Auto-Negotation to complete
/pci@1d,700000/pci@1/pci@0/network@0: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@1d,700000/pci@1/pci@0/network@0: link down
.......................... passed
Testing /pci@1d,700000/pci@1/pci@0/network@1 Register tests: passed
Internal loopback test: passed
/pci@1d,700000/pci@1/pci@0/network@1: Timed out waiting for Auto-Negotation to complete
/pci@1d,700000/pci@1/pci@0/network@1: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@1d,700000/pci@1/pci@0/network@1: link down
.......................... passed
Testing /pci@1f,700000/network@2 ...................................... passed
Testing /pci@1d,700000/network@2 ...................................... passed
Testing /pci@1d,700000/pci@1/pci@4/network@2 Register tests: passed
Internal loopback test: passed
/pci@1d,700000/pci@1/pci@4/network@2: Timed out waiting for Auto-Negotation to complete
/pci@1d,700000/pci@1/pci@4/network@2: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@1d,700000/pci@1/pci@4/network@2: link down
.......................... passed
Testing /pci@1f,700000/network@2,1 .................................... passed
Testing /pci@1d,700000/network@2,1 .................................... passed
Testing /pci@1d,700000/pci@1/pci@4/network@3 Register tests: passed
Internal loopback test: passed
/pci@1d,700000/pci@1/pci@4/network@3: Timed out waiting for Auto-Negotation to complete
/pci@1d,700000/pci@1/pci@4/network@3: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@1d,700000/pci@1/pci@4/network@3: link down
.......................... passed
Testing /pci@1e,600000/isa@7/rmc-comm@0,3e8

 

10 More Discussions You Might Find Interesting

1. Solaris

Netra 240 Hard disk are not detected

Hi All, I have new Netra 240 box which is not detecting its harddisk equiped with itse same har disk are detected when I swap with another machine. Same time If I swap hardisk of other machine to this Netra 240 box, also do not work. I have checked chassis, cabling etc and all looks fine. ... (1 Reply)
Discussion started by: xpwistler
1 Replies

2. AIX

Fibre channel drivers on RS/6000 aix 5L

Want to configure IBM raid strorage but the aix 5L cds do not have the drivers for the fibre channels. The machine is RS/6000. I have gone to IBM downlaodable sites but i can't find the drivers? help pliz:mad: (4 Replies)
Discussion started by: Zim-Aix-Guru
4 Replies

3. AIX

Power6 Virtual Fibre Channel Adapter

Hello, Searched in all IBM Redbooks and on the internet and couldn't find anything about the new feature of POWER 6 which Virtual Fibre ( Fiber ) channel adapter. It is similar to virtual scsi adapter. In my client partition I created the virtual Fibre Adapter mapped it with the VIO... (1 Reply)
Discussion started by: filosophizer
1 Replies

4. Solaris

netra 240 difference

Hi, sunfire v240 and netra 240 are looks similar. system board, memory and processors are similar, then why netra 240 called as telco server? can anyone tell the difference. RJS (1 Reply)
Discussion started by: rajasekg
1 Replies

5. Solaris

USCSICMD ioctl calls for Fibre Channel(FC) devices on Solaris 10?

Hi , I have wrtitten a C program that issues USCSICMD ioctl call to the tape devices attached on solaris sparc 10. I was able to get the required information from all SCSI tape devices attached using the utility. But, whenever it is run on FC attached tape drives , the program returns an error... (0 Replies)
Discussion started by: naveen448
0 Replies

6. Solaris

SUN Netra 240 Boot error

Hi, When I am trying to boot my SUN Netra 240 Machine its giving some boot error. > {1} ok boot -i > Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args: -i > Boot load failed. > The file just loaded does not appear to be executable. > {1} ok I tried to boot it from cdrom... (9 Replies)
Discussion started by: ppandey21
9 Replies

7. Hardware

Fibre Channel HBA recommendations?

We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice? Thanks in advance. (1 Reply)
Discussion started by: atahmass
1 Replies

8. Hardware

POST displays error sparc netra 240

Hi guys, when I power on my sun netra 240 server, it displays these error messages: 1. Notice: cpu 0 has 2048/2048 MB of memory disabled. 2. Error : The following devices are disabled dimm1. Please can anyone be kind enough to explain this for me? Thanks (2 Replies)
Discussion started by: cjashu
2 Replies

9. Solaris

Fibre channel link down on booting Solaris server

Hi I had power issue that affected a server, in which I had power ON the server SPARC T1-B3 running solaris 10. After power on the system stops at ok prompt, them I issued the following commands: {0} ok setenv auto-boot? false auto-boot? = false {0} ok reset-all SPARC T3-1B,... (10 Replies)
Discussion started by: fretagi
10 Replies

10. AIX

[ASK] - AIX Fibre Channel behavior

Hello all, Let me introduce about the context and my environment. We have an AIX 6.1 system, it has 4 FC channels / > lsdev -Cc adapter | grep fcs fcs0 Available 23-T1 Virtual Fibre Channel Client Adapter fcs1 Available 23-T1 Virtual Fibre Channel Client Adapter fcs2 Available 23-T1... (14 Replies)
Discussion started by: Phat
14 Replies
All times are GMT -4. The time now is 09:52 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy