When using PowerVM Express and IVM (no HMC) on a Power6 P520 , can I configure 2 LPARs in addition to a VIO server, or does the VIO Server count as one of the two LPAR's that PowerVM Express allows? (1 Reply)
Hi everyone,
Sorry if this post is in the wrong place. I searched the forums for "IVM" and it turned up no results. Hopefully someone knows about this. My dilemma is that I have multiple IBM JS12 Express blades in our blade center, each running VIOS 2.1.0.10-FP-20.1 and hosting a couple LPARs. Out... (2 Replies)
hi guys,
i need to develop following setup for a customer:
high availability oracle database on aix7 and linux in 2 different LPAR using dual ps700 blande a ds3400 and HMC.
the question is, it is possible to have automatic vioc failover(aix,linux) when for example 1 vios goes down?
in... (6 Replies)
Hello,
Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2.
What is the common practice - should I isolate my vios... (0 Replies)
Hi,
When I try to login on my vios ivm website http://vios through the browser -- all three of them -- firefox , chrome , Internet Explorer , i get this error
http://vioserver/j_security_check
I have java installed on the machine from where i am trying to open up the IVM/VIOS webpage.
I... (2 Replies)
Hello,
I installed PowerVM IVM Virtual I/O on P-550 but later found out that the machine isn't activated for CoD VET code for virtualization.
So when booted , it goes into OPEN Firmware
I/O Hosting requires a hosting partition boot not permitted exit called
> ok
Panel shows > IO... (3 Replies)
I am facing problems in moving CD-ROM from one lpar to another.
CDROM can be seen on the POWERVM (IVM) server , but through the web-access if I move it ( assign it ) to LPAR it will be assigned. I run cfgmgr , and the cdrom does not show up in the LPAR. I firmly believe this is the reason why I... (2 Replies)
Hi All,
I have a p520 box running 3 LPARs, 1 x VIOS, 1 x AIX 6.1 and 1 x AIX 7.1 and no HMC, all configuration is performed via VIOS/IVM
Until recently the box did not have the AIX7.1 LPAR and everything was fine with the box.
We needed to use AIX 7.1 for a new project, so I created a... (11 Replies)
coming from this thread: https://www.unix.com/aix/211107-ibm-power-pseries-open-firmware-boot-vios-powervm-vet-code.html
PowerVM, formerly known as Advanced Power Virtualization (APV), is a chargeable feature of IBM POWER5, POWER6, POWER7, POWER8, and POWER9 servers and is required for support... (0 Replies)
Discussion started by: filosophizer
0 Replies
LEARN ABOUT XFREE86
xtissensitive
XtSetSensitive(3Xt) XT FUNCTIONS XtSetSensitive(3Xt)NAME
XtSetSensitive, XtIsSensitive - set and check a widget's sensitivity state
SYNTAX
void XtSetSensitive(Widget w, Boolean sensitive);
Boolean XtIsSensitive(Widget w);
ARGUMENTS
sensitive Specifies a Boolean value that indicates whether the widget should receive keyboard and pointer events.
w Specifies the widget.
DESCRIPTION
The XtSetSensitive function first calls XtSetValues on the current widget with an argument list specifying that the sensitive field should
change to the new value. It then recursively propagates the new value down the managed children tree by calling XtSetValues on each child
to set the ancestor_sensitive to the new value if the new values for sensitive and the child's ancestor_sensitive are not the same.
XtSetSensitive calls XtSetValues to change sensitive and ancestor_sensitive. Therefore, when one of these changes, the widget's set_values
procedure should take whatever display actions are needed (for example, greying out or stippling the widget).
XtSetSensitive maintains the invariant that if parent has either sensitive or ancestor_sensitive False, then all children have ances-
tor_sensitive False.
The XtIsSensitive function returns True or False to indicate whether or not user input events are being dispatched. If both core.sensitive
and core.ancestor_sensitive are True, XtIsSensitive returns True; otherwise, it returns False.
SEE ALSO
X Toolkit Intrinsics - C Language Interface
Xlib - C Language X Interface
XFree86 Version 4.7.0 XtSetSensitive(3Xt)