Have two 3 files which has list of servers,users and location and base url which is common on every server
Code:
A = server1 server2 server3
B = user1 user2 user3
C = dom1 dom2 dom3
baseurl=/opt/SP/
and what i have to achieve is below via ssh from REMOTE SERVER
for it's first iteration it ssh to user1@server1 and goes to /opt/SP/user1/dom1
for it's second iteration it ssh to user2@server2 and goes to /opt/SP/user2/dom2
for it's third iteration it ssh to user3@server3 and goes to /opt/SP/user3/dom3
Moderator's Comments:
code tags please
Please advise
Last edited by jim mcnamara; 03-19-2019 at 11:43 AM..
I'm trying to iterate a UNIX awk script that returns min/max temperature data for each day from a monthly weather data file (01_weath.dat). The temperature data is held in $5. The temps are reported each minute so each day contains 1440 temperature enteries. The below code has gotten me as far as... (5 Replies)
I'm trying to write a script that accepts both arguments and options, e.g.
./script -h 1 -m 15 -s 30
or
./script
-h 1 -m 15 -s 30
I'd like for any of the arguments and options to be optional, and the option values should be numerals only. I've tried both getopt and getopts but I... (1 Reply)
Afternoon all,
I have been writing a script to do some selects on a table dependent on what options are selected when the script is run:
#!/bin/ksh
set -x
set -m
if
then
echo "usage: msglog.ksh -da <date and time> -i <interface> -m <msg> -di <direction> -mi <MIR>"
exit 1
fi... (3 Replies)
Hi guys i have written a script which takes the options given to him and execute itself accordingly.
for example
if a script name is doctortux then executing doctortux without option should made doctortux to be executed in automatic mode i.e. doctortux -a
or if a doctortux is needed to run in... (4 Replies)
Hi Experts,
I want to know the count of specific word in a file. I have almost 600+ files.
So I want to loop thru each file and get the count of the specific word.
Please help me on achieving this...
Many thanks (2 Replies)
one thing i was trying to figure out is if you can give people the option to choose what they want to do in a shell script. for example, let's just say that you have a simple shell script to install a couple of programs, can you make it to where you can press a certain key to install a certain... (1 Reply)
Hi
i need to find x in the following equation such that it satisfies this condition:
y/x-ln(x)-1.24=0
how can i write a script to iterate to give random x to satisfy this equation.
y is different each time too. any help with awk/shell script will be awesome!
thanks (1 Reply)
Hi guys,
I am having trouble with this script. What i want it to do is to iterate all command line arguments in reverse order. The code below does this fine but i need the output to print the words on separate lines instead of one line:
#!/bin/bash
#Takes in the arguments and displays them... (7 Replies)
I would like to iterate over `dirs`in a script, but the script will never show more than one (current) folder
#! /bin/bash
for i in `dirs`
do
echo ${i}
done
echo ++++++++++++++++++
for i in $( dirs -p )
do
echo ${i}
done
echo ------------------
dirscontent=`dirs`
echo... (5 Replies)
Discussion started by: alexanderb
5 Replies
LEARN ABOUT MINIX
system.rootdaemonrc
SYSTEM.ROOTDAEMONRC(1) General Commands Manual SYSTEM.ROOTDAEMONRC(1)NAME
system.rootdaemonrc, .rootdaemonrc - access control directives for ROOT daemons
LOCATIONS
ROOTDAEMORC, $HOME/.rootdaemonrc
/etc/root/system.rootdaemonrc, $ROOTSYS/etc/system.rootdaemonrc
DESCRIPTION
This manual page documents the format of directives specifying access control directives for ROOT daemons. These directives are read from a
text file whose full path is taken from the environment variable ROOTDAEMONRC. If such a variable in undefined, the daemon looks for a
file named .rootdaemonrc in the $HOME directory of the user starting the daemon; if this file does not exists either, the file system.root-
daemonrc, located under /etc/root or $ROOTSYS/etc, is used. If none of these file exists (or is readable), the daemon makes use of a
default built-in directive derived from the configuration options of the installation.
FORMAT
* lines starting with '#' are comment lines.
* hosts can specified either with their name (e.g. pcepsft43), their FQDN (e.g. pcepsft43.cern.ch) or their IP address (e.g.
137.138.99.73).
* host names can be followed by :rootd, :proofd or :sockd to define directives applying only to the given service; 'sockd' applies to
servers run from interactive sessions (TServerSocket class)
* directives applying to all host can be specified either by 'default' or '*'
* the '*' character can be used in any field of the name to indicate a set of machines or domains, e.g. pcepsft*.cern.ch applies to
all 'pcepsft' machines in the domain 'cern.ch'. (to indicate all 'lxplus' machines you should use 'lxplus*.cern.ch' because inter-
nally the generic lxplus machine has a real name of the form lxplusnnn.cern.ch; you can also use 'lxplus' if you don't care about
domain name checking).
* a whole domain can be indicated by its name, e.g. 'cern.ch', 'cnaf.infn.it' or '.ch'
* truncated IP address can also be used to indicate a set of machines; they are interpreted as the very first or very last part of the
address; for example, to select 137.138.99.73, any of these is valid: '137.138.99', '137.138', '137`, '99.73'; or with wild cards:
'137.13*' or '*.99.73`; however, '138.99' is invalid because ambiguous.
* the information following the name or IP address indicates, in order of preference, the short names or the internal codes of authen-
tication methods accepted for requests coming from the specified host(s); the ones implemented so far are:
Method nickname code
UsrPwd usrpwd 0
SRP srp 1
Kerberos krb5 2
Globus globus 3
SSH ssh 4
UidGid uidgid 5 (insecure)
(The insecure method is intended to speed up access within a cluster protected by other means from outside attacks; should not be
used for inter-cluster or inter-domain authentication). Methods non specified explicitly are not accepted. For the insecure method
it is possible to give access only to a specific list of users by specifying the usernames after the method separated by colons (:)
example:
uidgid:user1:user2:user3
will allow uidgid access only to users user1, user2 and user3. This is useful to give easy access to data servers. It is also possi-
ble to deny access to a user by using a '-' in front of the name:
uidgid:-user4
* Lines ending with '' are followed by additional information for the host on the next line; the name of the host should not be
repeated.
EXAMPLES
Valid examples:
default none
All requests are denied unless specified by dedicated directives.
default 0 ssh
Authentication mechanisms allowed by default are 'usrpwd' (code 0) and 'ssh'
137.138. 0 4
Authentication mechanisms allowed from host in the domain 137.138. (cern.ch) are 'usrpwd' (code 0) and 'ssh'
pceple19.cern.ch 4 1 3 2 5 0
All mechanisms are accepted for requests coming from host pceple19.cern.ch .
lxplus*.cern.ch 4 1 globus 0:qwerty:uytre
Requests from the lxplus cluster can authenticate using 'ssh', 'srp' and 'globus'; users 'qwerty' and 'uytre' can also use 'usrpwd'
.
pcep*.cern.ch:rootd 0:-qwerty 4
Requests from the pcep*.cern.ch nodes can authenticate using 'usrpwd' and 'ssh' when accessing the 'rootd' daemon ; user 'qwerty'
can only use 'ssh'.
SEE ALSO rootd(1), proofd(1)
For more information on the ROOT system, please refer to http://root.cern.ch/ .
ORIGINAL AUTHORS
The ROOT team (see web page above):
Rene Brun and Fons Rademakers
COPYRIGHT
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as pub-
lished by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MER-
CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foun-
dation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
AUTHOR
This manual page was written by G. Ganis <g.ganis@cern.ch> .
ROOT Version 4 SYSTEM.ROOTDAEMONRC(1)
03-19-2019
