is a function to telnet to an address. The first argument is the hostname, the second is the port number, so, this iteration is telnetting to port 26 of the value of the "Zero" array element.
My question is, it works perfectly fine, but for some reason it telnets to 127.0.0.1. I'm wondering why?
Also, how do I change the value of said element ("Zero")? At this point in time it seems to be set to "0".
I'm wondering how do I change that?
BTW, if you're looking for the source code to the
function, my paste on pastebin is still there.
I would like to extend a logical drive on our 3510. I have four unallocated disks which I would like to use for this purpose.
The 3510 supports a Sun Cluster but for now all I wish to see is a "new" disk when I run format.
I am a little familiar with the telnet/ssh session on the 3510 but am... (2 Replies)
I would like to find a list of files in a directory less than 2 days old and put them into an array variable. And then search for each file in the array for a matching string say "Return-code= 0". If it matches, then display the array element with a message as "OK".
Your help will be greatly... (1 Reply)
All,
I would like to add the first 10 elements of an array. Here is how I am doing it now (only included first few add ops):
#!/usr/bin/ksh
###Grab the array values out of a file###
TOTAL=`awk '/time/' /tmp/file.out | awk '{print $4}'`
set -A times $TOTAL
SUM=$((${times} + times... (3 Replies)
Hi all
Ive got a v440 with an external T3 RAID in a dual bus configuration. I need to add an additional JBOD extension to the disk array via two VDCH cables.
Now, can I do this as the server is live ? Can I just plug the two cables in, switch on the additional extension ? Will this cause... (1 Reply)
Hi,
Kindly assist by analyzing the code below and suggest changes to achieve the required output.
The input file:
01-010241800000 35000 MV010 02/03/09 0306 03060226 03
02-004103300000 470000 MV010 02/03/09 0301 03010276 03
The objective is to convert field No4. from dd/mm/yy to yyyymmdd... (5 Replies)
I need some help with adding lines to file and substitute a pattern.
Ok I have a file:
#cat names.txt
name: John Doe
stationed: 1
name: Michael Sweets
stationed: 41
.
.
.
And would like to change it to:
name: John Doe
employed
permanently
stationed: 1-office (7 Replies)
I'm trying to add the paths of all the xml files in certain directories to an array. I want to use the array later in my code. Anyway, for some reason this isn't working. Any help would be appreciated.
Path_Counter=0
for result in "find * -name '*.xml'"; do
XmlPath="$result"
echo... (2 Replies)
Hello,
I have a simple task and I am having some trouble with the syntax. I have a variable with an assigned value,
CMD_STRING='-L 22 -s 0 -r -O -A i -N 100 -n'
I would like to add that variable to an array. As far as I have been able to look up, the syntax should be something like,
... (4 Replies)
Hello Everybody !
I'm Harry from Athens Greece and i have a problem with my Sendmail 8.13.3 installed on Solaris SunOS ultra 5.10.
The problem is that when someone sends to us an e-mail and his e-mail address is like : xxxx@xxxx.com, our e-mail server adds up in the senders address a .com.gr... (2 Replies)
Hi Experts,
I've got this problem where I need to add two array in shell script such that that is an element is greater than 9 then it get further split into individual digit, something like below :
Input :-
array1=(2 6 8 9 10 12)
array2=(5 4 6 8 12 14)
Output :-
array3=(7 1 0 1 4 1 7 2 2... (8 Replies)
Discussion started by: mukulverma2408
8 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)