03-11-2019
There are several issues you will have to deal with.
The first: do you have the root password? you will not be able to start the machine in single user mode without it.
Second: this machine has an IDE hard drive which will be difficult to replace.
Third: what is the actual release of SCO? The release number should be 5.0.? where ? is probably 5 through 7.
This manual may help
http://tim.id.au/laptops/lenovo/thinkpad%20t30.pdf
This User Gave Thanks to jgt For This Post:
8 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
HI ALL,
I need to backup HDD with SCO UNIX. I need to have a full functionaly backup of this hard disk. Does anybody have any tool or subsription how to do it. I tried some SW, but after when I tried to use this copy of my original disk "can not find a root directory". Thanks in advance. (1 Reply)
Discussion started by: jardas
1 Replies
2. SCO
Hi guys,
I have this quick question , is it posible to isntall SCO 5.0.7 on a serial ATA and if it is can you tell me how or maybe a website that has some info about this.
I'm not using any raid, just one HDD.
Thanks a lot (0 Replies)
Discussion started by: josramon
0 Replies
3. UNIX for Advanced & Expert Users
Hello,
I have a P4, 2.4GHz, 256MB ASROCK mainboard: I am trying to install sco 5.0.5 on an 80gb hdd IDE .
I have tried the following techniques:
1. using the updated wd btld image- no success
2. defbootstr biosgeom
3. use interactive divvy, make adjustments using dkinit/dparam during... (0 Replies)
Discussion started by: pude
0 Replies
4. SCO
Hi guys,
I have this problem ,
One of our client's hdd went down and we cannot boot up the machine , I've installed a new hdd with a fresh copy of SCO 5.0.6 same as the one in the old HDD, i think the data still good in the old HDD.
My question!!!
How can i access the data from the fresh... (4 Replies)
Discussion started by: josramon
4 Replies
5. Ubuntu
Hi guys, I am total newbie to Linux / Ubuntu but trying it to solve the problem I have.
I have an OKI printer with bad HDD and trying to clone one from the same HDD from working printer. Board it goes on has a Fiery chipset and system used is Linux based / related - to the best of my knowlege. I... (12 Replies)
Discussion started by: Unlimitedbt
12 Replies
6. HP-UX
Hi there,
I got a pretty old HP 382 workstation, and the hdd is pretty LOUD ... ;)
So I thought I clone it to an much quiter one.
I tried this:
- removed the loud hdd
- connected it to an system running knoppix 7.0.4 (hdd is recognized with UFS filesystem; Clonezilla couldn't handle the... (9 Replies)
Discussion started by: pelegrine
9 Replies
7. SCO
Hi all
I have read about mounting crashed HDD from a sco system in this forum. However this I received an image on raw format of the crashed system that was using an IDE HDD. Which method should I mount my image? IDE scsi or USB? The image is stores in an external connected through USB .
Also... (4 Replies)
Discussion started by: OrangeKenny
4 Replies
8. AIX
Hi Folks,
I am facing an issue with the performance.
P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes
P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and... (7 Replies)
Discussion started by: filosophizer
7 Replies
LEARN ABOUT MOJAVE
curlopt_netrc
CURLOPT_NETRC(3) curl_easy_setopt options CURLOPT_NETRC(3)
NAME
CURLOPT_NETRC - request that .netrc is used
SYNOPSIS
#include <curl/curl.h>
CURLcode curl_easy_setopt(CURL *handle, CURLOPT_NETRC, long level);
DESCRIPTION
This parameter controls the preference level of libcurl between using user names and passwords from your ~/.netrc file, relative to user
names and passwords in the URL supplied with CURLOPT_URL(3).
libcurl uses a user name (and supplied or prompted password) supplied with CURLOPT_USERPWD(3) or CURLOPT_USERNAME(3) in preference to any
of the options controlled by this parameter.
Only machine name, user name and password are taken into account (init macros and similar things aren't supported).
libcurl does not verify that the file has the correct properties set (as the standard Unix ftp client does). It should only be readable by
user.
level should be set to one of the values described below.
CURL_NETRC_OPTIONAL
The use of your ~/.netrc file is optional, and information in the URL is to be preferred. The file will be scanned for the host and
user name (to find the password only) or for the host only, to find the first user name and password after that machine, which ever
information is not specified in the URL.
Undefined values of the option will have this effect.
CURL_NETRC_IGNORED
The library will ignore the file and use only the information in the URL.
This is the default.
CURL_NETRC_REQUIRED
This value tells the library that use of the file is required, to ignore the information in the URL, and to search the file for the
host only.
DEFAULT
CURL_NETRC_IGNORED
PROTOCOLS
Most
EXAMPLE
TODO
AVAILABILITY
Always
RETURN VALUE
Returns CURLE_OK
SEE ALSO
CURLOPT_USERPWD(3), CURLOPT_USERNAME(3),
libcurl 7.54.0 February 03, 2016 CURLOPT_NETRC(3)