03-10-2019
Have 1 question, assuming 1 FC has 2 ports (port 1 & 2). I create 2 virtual FC cards on lpart. And map both virtual FCs to the same physical FC. So what will happen? They use the same port 1 or port 2 or first virtual FC uses port 1 and second virtual FC use port 2?
9 More Discussions You Might Find Interesting
1. AIX
Want to configure IBM raid strorage but the aix 5L cds do not have the drivers for the fibre channels. The machine is RS/6000. I have gone to IBM downlaodable sites but i can't find the drivers? help pliz:mad: (4 Replies)
Discussion started by: Zim-Aix-Guru
4 Replies
2. AIX
Hello,
I have two systems that are being prepared to be SAN attached ..
can anyone tell me any specific checks I should perform prior to the cards being installed...
I am aware of firmware / OS level and relevant drivers, is there anything else?
thanks
Chris. (8 Replies)
Discussion started by: chlawren
8 Replies
3. AIX
Hello,
Searched in all IBM Redbooks and on the internet and couldn't find anything about the new feature of POWER 6 which Virtual Fibre ( Fiber ) channel adapter.
It is similar to virtual scsi adapter.
In my client partition I created the virtual Fibre Adapter mapped it with the VIO... (1 Reply)
Discussion started by: filosophizer
1 Replies
4. Solaris
Hi ,
I have wrtitten a C program that issues USCSICMD ioctl call to the tape devices attached on solaris sparc 10. I was able to get the required information from all SCSI tape devices attached using the utility. But, whenever it is run on FC attached tape drives , the program returns an error... (0 Replies)
Discussion started by: naveen448
0 Replies
5. AIX
hi
i have two aix servers and I was asked to setup a secure shell between the two servers using the sybase user. Can any one let me know how to do this (2 Replies)
Discussion started by: newtoaixos
2 Replies
6. Hardware
We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice?
Thanks in advance. (1 Reply)
Discussion started by: atahmass
1 Replies
7. AIX
Hello,
Just a quick question
Usually from a PSERIES if you want to connect to IBM SAN Storage
you connect the IBM SAN Storage through a SAN Switch
something like this
---
however my question
Can you connect
from Pseries directly to San Storage without SAN Switch
what would be... (8 Replies)
Discussion started by: filosophizer
8 Replies
8. Solaris
Hi
I had power issue that affected a server, in which I had power ON the server SPARC T1-B3 running solaris 10.
After power on the system stops at ok prompt, them I issued the following commands:
{0} ok setenv auto-boot? false
auto-boot? = false
{0} ok reset-all
SPARC T3-1B,... (10 Replies)
Discussion started by: fretagi
10 Replies
9. Solaris
Hi,
One of my Netra 240 went into hung state and I had to reboot it. I powered it off and tried booting it again but unsuccessful. It is not connected to SAN and have local disks. Not able to boot in failsafe mode too.
There are two disks of 72GB, both are mirrored in SVM. It complains about... (5 Replies)
Discussion started by: solaris_1977
5 Replies
LEARN ABOUT SUNOS
create-virtual-server
asadmin-create-virtual-server(1AS) User Commands asadmin-create-virtual-server(1AS)
NAME
asadmin-create-virtual-server, create-virtual-server - adds the named virtual server
SYNOPSIS
create-virtual-server --user admin_user [--password admin_password] [--host localhost] [--port 4848] [--secure|-s] [--passwordfile file-
name] [--terse=false] [--echo=false] [--interactive=true] --hosts hosts [--httplisteners http_listeners] [--defaultwebmodule
default_web_module] [--state on] [--logfile log_file] [--property (name=value)[:name=value]*] virtual_server_id
Creates the named virtual server. Virtualization in the Application Server allows multiple URL domains to be served by the same HTTP server
process which is listening on multiple host addresses. If the application is available at two virtual servers, they still share the same
physical resource pools.
This command is supported in remote mode only.
OPTIONS
--user authorized domain application server administrative username.
--password password to administer the domain application server.
--host machine name where the domain application server is running.
--port port number of the domain application server listening for administration requests.
--secure if true, uses SSL/TLS to communicate with the domain application server.
--passwordfile file containing the domain application server password.
--terse indicates that any output data must be very concise, typically avoiding human-friendly sentences and favoring well-
formatted data for consumption by a script. Default is false.
--echo setting to true will echo the command line statement on the standard output. Default is false.
--interactive if set to true (default), only the required password options are prompted.
--hosts a comma separated (,) list of values allowed in the host request header to select the current virtual server. Each
virtual server that is configured to the same connection group must have a unique hosts value for that group.
--httplisteners optional; a comma separated (,) list of HTTP listener IDs. Required only for a virtual server that is not the
default virtual server.
--defaultwebmodule standalone web module associated with this virtual server by default.
--state determines whether a virtual server is active (on) or inactive (off or disabled). Default is active (on). When
inactive, the virtual server does not service requests.
--logfile name of the file where the log has to be written to.
--property optional attributes name/value pairs for configuring the connection pool.
OPERANDS
virtual_server_id identifies the unique ID for the virtual server to be created. This virtual server ID cannot begin with a number.
Example 1: Using create-virtual-server
asadmin> create-virtual-server --user admin1 --password adminadmin1
--host pigeon --port 5001 --httplisteners http-listener-1 --defaultwebmodule simple
--state on --logfile server.log --property User=admin:Password=admin
--hosts sample1,sample2 sample_vs1
Command create-virtual-server executed successfully
Where sample_vs1 is the virtual server created.
EXIT STATUS
0 command executed successfully
1 error in executing the command
asadmin-delete-virtual-server(1AS), asadmin-list-virtual-server(1AS)
J2EE 1.4 SDK March 2004 asadmin-create-virtual-server(1AS)