Want to configure IBM raid strorage but the aix 5L cds do not have the drivers for the fibre channels. The machine is RS/6000. I have gone to IBM downlaodable sites but i can't find the drivers? help pliz:mad: (4 Replies)
Hello,
I have two systems that are being prepared to be SAN attached ..
can anyone tell me any specific checks I should perform prior to the cards being installed...
I am aware of firmware / OS level and relevant drivers, is there anything else?
thanks
Chris. (8 Replies)
Hello,
Searched in all IBM Redbooks and on the internet and couldn't find anything about the new feature of POWER 6 which Virtual Fibre ( Fiber ) channel adapter.
It is similar to virtual scsi adapter.
In my client partition I created the virtual Fibre Adapter mapped it with the VIO... (1 Reply)
Hi ,
I have wrtitten a C program that issues USCSICMD ioctl call to the tape devices attached on solaris sparc 10. I was able to get the required information from all SCSI tape devices attached using the utility. But, whenever it is run on FC attached tape drives , the program returns an error... (0 Replies)
hi
i have two aix servers and I was asked to setup a secure shell between the two servers using the sybase user. Can any one let me know how to do this (2 Replies)
We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice?
Thanks in advance. (1 Reply)
Hello,
Just a quick question
Usually from a PSERIES if you want to connect to IBM SAN Storage
you connect the IBM SAN Storage through a SAN Switch
something like this
---
however my question
Can you connect
from Pseries directly to San Storage without SAN Switch
what would be... (8 Replies)
Hi
I had power issue that affected a server, in which I had power ON the server SPARC T1-B3 running solaris 10.
After power on the system stops at ok prompt, them I issued the following commands:
{0} ok setenv auto-boot? false
auto-boot? = false
{0} ok reset-all
SPARC T3-1B,... (10 Replies)
Hi,
One of my Netra 240 went into hung state and I had to reboot it. I powered it off and tried booting it again but unsuccessful. It is not connected to SAN and have local disks. Not able to boot in failsafe mode too.
There are two disks of 72GB, both are mirrored in SVM. It complains about... (5 Replies)
Discussion started by: solaris_1977
5 Replies
LEARN ABOUT DEBIAN
device::usb::pcsensor::hidtemper::temper
Device::USB::PCSensor::HidTEMPer::TEMPer(3pm) User Contributed Perl Documentation Device::USB::PCSensor::HidTEMPer::TEMPer(3pm)
Device::USB::PCSensor::HidTEMPer::TEMPer - The HidTEMPer thermometer
VERSION
Version 0.02
SYNOPSIS
None
DESCRIPTION
This is the implementation of the HidTEMPer thermometer that have only one internal sensor measuring the temperature. It is important to
notice that the TEMPer device with one external sensor will not function, although being recognized correctly.
CONSTANTS
None
METHODS
o init()
Initialize the device, connects the sensors and makes the object ready for use.
INHERIT METHODS FROM
Device::USB::PCSensor::HidTEMPer::Device
DEPENDENCIES
This module internally includes and takes use of the following packages:
use Device::USB::PCSensor::HidTEMPer::Device;
use Device::USB::PCSensor::HidTEMPer::TEMPer::Internal;
This module uses the strict and warning pragmas.
BUGS
Please report any bugs or missing features using the CPAN RT tool.
FOR MORE INFORMATION
None
AUTHOR
Magnus Sulland < msulland@cpan.org >
ACKNOWLEDGEMENTS
None
COPYRIGHT &; LICENSE
Copyright (c) 2010 Magnus Sulland
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.10.1 2010-07-24 Device::USB::PCSensor::HidTEMPer::TEMPer(3pm)
03-08-2019
you want to emphasize full details are very crucial???