[ASK] - AIX Fibre Channel behavior Post: 303031956

9 More Discussions You Might Find Interesting

1. AIX

Fibre channel drivers on RS/6000 aix 5L

Want to configure IBM raid strorage but the aix 5L cds do not have the drivers for the fibre channels. The machine is RS/6000. I have gone to IBM downlaodable sites but i can't find the drivers? help pliz:mad:

2. AIX

Install Fibre Card AIX 5.3

Hello, I have two systems that are being prepared to be SAN attached .. can anyone tell me any specific checks I should perform prior to the cards being installed... I am aware of firmware / OS level and relevant drivers, is there anything else? thanks Chris.

3. AIX

Power6 Virtual Fibre Channel Adapter

Hello, Searched in all IBM Redbooks and on the internet and couldn't find anything about the new feature of POWER 6 which Virtual Fibre ( Fiber ) channel adapter. It is similar to virtual scsi adapter. In my client partition I created the virtual Fibre Adapter mapped it with the VIO...

4. Solaris

USCSICMD ioctl calls for Fibre Channel(FC) devices on Solaris 10?

Hi , I have wrtitten a C program that issues USCSICMD ioctl call to the tape devices attached on solaris sparc 10. I was able to get the required information from all SCSI tape devices attached using the utility. But, whenever it is run on FC attached tape drives , the program returns an error...

5. AIX

Setting up a secure channel with AIX

hi i have two aix servers and I was asked to setup a secure shell between the two servers using the sybase user. Can any one let me know how to do this

6. Hardware

Fibre Channel HBA recommendations?

We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice? Thanks in advance.

7. AIX

AIX - Fibre Adapter and IBM Storage

Hello, Just a quick question Usually from a PSERIES if you want to connect to IBM SAN Storage you connect the IBM SAN Storage through a SAN Switch something like this --- however my question Can you connect from Pseries directly to San Storage without SAN Switch what would be...

8. Solaris

Fibre channel link down on booting Solaris server

Hi I had power issue that affected a server, in which I had power ON the server SPARC T1-B3 running solaris 10. After power on the system stops at ok prompt, them I issued the following commands: {0} ok setenv auto-boot? false auto-boot? = false {0} ok reset-all SPARC T3-1B,...

9. Solaris

Fibre Channel link not ready on Netra 240

Hi, One of my Netra 240 went into hung state and I had to reboot it. I powered it off and tried booting it again but unsuccessful. It is not connected to SAN and have local disks. Not able to boot in failsafe mode too. There are two disks of 72GB, both are mirrored in SVM. It complains about...

LEARN ABOUT DEBIAN

guess

guess(8)							   NVRAM WakeUp 							  guess(8)

NAME

       guess - Tries  to  guess  the configuration by comparing four dumps of the NVRAM.

SYNOPSIS

       guess

DESCRIPTION

       guess  tries to figure out the position of the wakeup time settings in the NVRAM.  Just run guess from within the directory, where the four
       NVRAM dumps at stored as "31.23.59.59+", "11.12.13.14+", "01.00.00.00+" and "01.00.00.00-". The file names denote the wakeup time, you have
       to set manually, before dumping the NVRAM:

       <DD>.<HH>.<MM>.<SS><status>

       <DD> = Day of month

       <HH> = Hour

       <MM> = Minute

       <SS> = Second

       <status> = wakeup enabled (+) or disabled (-)

SEE ALSO

       nvram-wakeup(8), guess-helper(8), README.mb

HOMEPAGE

       http://sf.net/projects/nvram-wakeup/

AUTHOR

       Written by Sergei Haller <Sergei.Haller@math.uni-giessen.de>.

REPORTING BUGS

       Report bugs at the bug tracking system (see HOMEPAGE) or on the mailing list nvram-wakeup-devel@lists.sourceforge.net

COPYRIGHT

       Copyright (C) 2001-2004 Sergei Haller.

       This  program  is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by
       the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY	WARRANTY;  without  even  the  implied	warranty  of  MER-
       CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.

       You  should  have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation,
       Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

Linux								    Jul 07 2004 							  guess(8)