hi
i can't boot my sun server by iso solaris 10 sparc dvd that i did download from oracle site.
my hardware is sun T5220.
i receive these after running boot cdrom -s :
whould u help me?
Moderator's Comments:
Please use CODE tags as required by forum rules!
Last edited by RudiC; 03-02-2019 at 11:59 AM..
Reason: Added CODE tags.
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
I have an x86 Sun server, with no CDROM drive and no OS currently loaded on it. I need to install CentOS on it... trying to figure out how to do that.
I've heard there are ways to connect to the serial management port, and mount a laptop's CDROM drive as a drive the server will recognize to... (0 Replies)
Hi Guyz,
I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso.
When trying to boot at the ok> boot cdrom
i get the following error:
-----------------------------------------------------------------------
Boot device:... (2 Replies)
Hello,
Ive just aquired a blade 150 off ebay.Im new to suns and are having a problem getting it to boot off the cdrom.Openboot continuously tries to do a network boot and I cant enter any commands.Im using an average pc keyboard and it definetly works.Thanks for any help.:wall: (3 Replies)
Hi everyone,
I have searched on google and sun documentation but it's still not clear for me; how do we boot a sun Solaris server?
I know what to do but only from this step:
1- start /SYS
2- start /SP/console
The system go to to the prompt OK, then we use the BOOT command.
My... (9 Replies)
One of our T5220 servers fail to boot due to following error:
ERROR: The following devices are disabled:
XAUI1
XAUI0
I can't see any disabled components in SP console, any idea what is the problem? (1 Reply)
I have three Sun Oracle Netra T5220s. I am trying to just get the processor information psrinfo or prtdiag -v from the # prompt in single user mode.
I am needing to know the commands to get to boot the CD/DVD of the Solaris OS. I am using it via Serial Port Management.
Tinkering around I... (4 Replies)
Hi,
I want to install Solaris-11 on T5220. I created USB from sol-11_4-text-sparc.usb by usbcopy on another Solaris-11 servers, which looks like a good one.
I tried did "reset-all" and still same issue. Can I get some help on this.
{0} ok reset-all
Sun Netra T5220, No Keyboard
Copyright... (8 Replies)
Discussion started by: solaris_1977
8 Replies
LEARN ABOUT MINIX
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)