Let me clarify again. On the power machine which has physical FCs attached to SAN via SAN switch, as can be seen on my environment, there are 2 LPARs as below:
1. First LPAR with virtual FC (assigned by VIOS) and can use the LUN allocated to it, this point can be understood as it uses NPIV.
2. Second LPAR does not use VIOS and virtual FC, because with the lsdev -Cc adapter | grep fcs as showed, the FC adapter are "physical ones", not virtual as it does not start with C in the WWPN.
My question is, how can it connects and uses the LUN which is allocated to it? As my thought, it is utilizing also the physical FC port of power machine.
if first LPAR uses NPIV, so what technique does second LPAR use? It can use Power Machine physical FC directly and without need the VIOS and virtual FC?
Hi,
Is there a way to dynamically increase the size of virtual disk on the LPAR. The virtual disk is coming from my VIO Server. From my SAN I have allocated a disk to VIO Server and from VIO Server to my LPAR....If I increase the space of the logical SAN DISK (DS 4700 using IBM TotalStorage... (0 Replies)
Hi,
I want to know if there is any command which will tell me if an AIX machine is a LPar or not. I am using "lparstat -i" but it does not work on all AIX machines. Is there any generic command by whose output I will come to know if it is an LPar or not?
Please help.
Thanks,
Vineet (3 Replies)
Hello, we have a wierd and urgent problem, with a few of our p595 LPARs running AIX 5.3. The LPARs ran AIX 5.3 TL 7 and booted off EMC SAN disks, using EMC Powerpath. Every boot we run "pprootdev on" and "pprootdev fix". We can issue "bosboot -a" and we can reboot the machines.
Now, on two... (2 Replies)
Hi All,
I recently got a connection to the SAN through a fibre channel on my solaris box:
#luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
#ls -l /dev/cfg
lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc
I then... (2 Replies)
Hi Guru, my question is that can I create LPAR in AIX 5.3, 6.0, 6.1 by using smit lpar, rather than using HMC or AIX Commands? Thank you very much. Mir Alihttp://xwww.unix.com/images/icons/icon5.gif (3 Replies)
I have login into a server, and when i launch this command uname -L.
I can see there is a LPAR.
But is there anymore commands i can use to get more information on the LPAR ?
like it is VIO ?
wat the IP address ?
etc, etc.
please help. Thank you. (7 Replies)
We are running into a problem that we thought had solved but no go...
We have multiple machine types but 1 AIX and 2 i550 (AS/400) with 4 lpar each.
Existing AIX is an old (2004 vintage) machine with 5.2 on it for historical use only.
Existing Power6 i550 running code that will used... (6 Replies)
Hello,
I've set up email alerts on AIX Servers. so that i can get email notifications (via mail relay server) when ever there is abnormal behavior.
for example
1) my script monitors CPU/disk/memory etc... when it reaches high water ark, it will send an email alert.
2) disk usage alerts
3)... (5 Replies)
We have 2 LPAR. LPAR #1 have a Application, Database Server process (ctree Server) and SAN+Physical Table. LPAR#2 has only Application.
Both Application process are connected to Database via C-tree Server Process (Running on LPAR #1..
We want to keep one Active C-tree Server and one Backup... (1 Reply)