Ip change SCO UNIX 3.2.4.2 Post: 303031021

Sponsored Content

Top Forums UNIX for Beginners Questions & Answers Ip change SCO UNIX 3.2.4.2 Post 303031021 by steveo314 on Wednesday 20th of February 2019 01:31:49 PM

02-20-2019

Registered User

Code:

# vi /etc/rc2.d/S99route
echo setting default route
/etc/route add default 192.168.1.1 1
# chown root S99route
# chgrp sys S99route
# chmod 744 S99route
# reboot
...
setting default route
add net default: gateway 192.168.1.1 flags 0x3
...
# netstat -nr
Routing Tables
Destination    Gateway        Flags    Refs      Use     Interface
127.0.0.1            127.0.0.1          UH         1             0          lo0
default             192.168.1.1       UG          0              0          d22e0
default             192.168.1.46    UG         0              0         d22e0
192.168.1           192.168.1.46    U            1             0          d22e0
#

Still nothing

When I setup the chain for the card does I/O base address matter?
When I resetup the chain for the other machine that is working, it did not ask for
the IRQ and I/O base. But the one that isn't accessible does ask for it.

steveo314

View Public Profile for steveo314

Find all posts by steveo314

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

SCO TCP/IP runtime System for SCO Unix

Hi everyone i have a question for all of you. It may be basic or it may be a good one. I recently aquired a copy of "SCO TCP/IP runtime System for SCO Unix" (thats what the disks say) and for the life of me i can not get it to load. i have tried opening the disk in linux and it can not determine...

2. SCO

pswd change on sco GUI login

Can i change the password on the SCO GUI interface login page and if so how? When I try to login it just goes right back to the login screen. If anyone has any suggestions, please reply. :confused:

3. Filesystems, Disks and Memory

Unix Sco Open Server, Windows Computers Problem Access Unix Shared Files Help!!!!!

Hello Moto I hope someone can help We's here at work, have a unix box with sco openserver 5 on it, so it has a nice gui interface.. and also a fair few windows computers.. a system admin guy b4 me, has set up a user called neil, which can, when u try to access the unix box using windows...

4. UNIX for Dummies Questions & Answers

unix system v release 3.2 (sco-unix?)

another unix printing issue. our client based pc's used to print some form's to our hp printer. as of the moment they can not print. i have checked & did the ff: #lpstat -r (scheduler is running) i dunno if i need to restart the whole unix box via shutdown or just checking at...

5. SCO

load sco xenix and sco unix binary ?

Hi I have some sco xenix object, bin and archive files that operate in sco unix 5.0.7. I know that sco unix kernel can support sco xenix binary. I want to know how can I link xenix and unix archives together?

6. SCO

change NetBIOS name of SCO 5.0.6

hi Howto change NetBIOS name of SCO 5.0.6? Is it enough just to edit /etc/hosts file?

7. SCO

Change SCO - GUI or Desktop interface to DOS based interface

Hi all I have installed a demo version of SCO OpenServer 5.0.2, I finally found it is Desktop Interface, I would like to know how to change its interface to dos based interface? If you have any ideas, please tell me then. Thank you

8. SCO

Change Disk controller in SCO 6.0.0

So today I tried to upgrade a customer from a Proliant with an HPSAS controller to an Intel server with a MEGASAS controller. First, I downloaded the megasas driver from SCO and installed it on the old system. Then I created a new Microlite Edge emergency boot cd with the new driver on it. I...

9. UNIX for Dummies Questions & Answers

Error UNIX: UNIX SCO release 5.05 system does not boot

UNIX sco release 5.05 system does not boot:cannot open device hd(40)/boot stage 1 boot failure: error loading hd(40)/bootWhat to do?

LEARN ABOUT OPENSOLARIS

tc-route

Route classifier in tc(8)                                              Linux                                             Route classifier in tc(8)

NAME

       route - route traffic control filter

SYNOPSIS

       tc filter ... route [ from REALM | fromif TAG ] [ to REALM ] [ classid CLASSID ] [ action ACTION_SPEC ]

DESCRIPTION

       Match  packets  based  on routing table entries. This filter centers around the possibility to assign a realm to routing table entries. For
       any packet to be classified by this filter, a routing table lookup is performed and the returned realm is used to  decide  on  whether  the
       packet is a match or not.

OPTIONS

       action ACTION_SPEC
              Apply an action from the generic actions framework on matching packets.

       classid CLASSID
              Push matching packets into the class identified by CLASSID.

       from REALM
       fromif TAG
              Perform source route lookups.  TAG is the name of an interface which must be present on the system at the time of tc invocation.

       to REALM
              Match if normal (i.e., destination) routing returns the given REALM.

EXAMPLES

       Consider the subnet 192.168.2.0/24 being attached to eth0:

              ip route add 192.168.2.0/24 dev eth0 realm 2

       The following route filter will then match packets from that subnet:

              tc filter add ... route from 2 classid 1:2

       and pass packets on to class 1:2.

NOTES

       Due  to  implementation  details,  realm  values  must  be  in  a  range from 0 to 255, inclusive. Alternatively, a verbose name defined in
       /etc/iproute2/rt_realms may be given instead.

SEE ALSO

       tc(8), ip-route(8)

iproute2                                                            21 Oct 2015                                          Route classifier in tc(8)