You don't have a gateway address.
Add a script to /etc/rc2.d that executes after S85tcp that contains:
or edit the/etc/default/tcp so that GATEWAY has a value.
--- Post updated at 10:54 AM ---
The scripts in /etc/rc2.d execute in alphabetical order.
Does 192.168.1.x need to be the last ip in the scheme or does it need to stay as 192.168.1.x?
I set it as the last ip in the scheme. I got this on boot:
Last edited by steveo314; 02-20-2019 at 12:42 PM..
Hi everyone i have a question for all of you. It may be basic or it may be a good one. I recently aquired a copy of "SCO TCP/IP runtime System for SCO Unix" (thats what the disks say) and for the life of me i can not get it to load. i have tried opening the disk in linux and it can not determine... (0 Replies)
Can i change the password on the SCO GUI interface login page and if so how?
When I try to login it just goes right back to the login screen. If anyone has any suggestions, please reply. :confused: (3 Replies)
Hello Moto
I hope someone can help
We's here at work, have a unix box with sco openserver 5 on it, so it has a nice gui interface.. and also a fair few windows computers..
a system admin guy b4 me, has set up a user called neil, which can, when u try to access the unix box using windows... (2 Replies)
another unix printing issue.
our client based pc's used to print some form's to our hp printer. as of the moment they can not print.
i have checked & did the ff:
#lpstat -r (scheduler is running)
i dunno if i need to restart the whole unix box via shutdown or just checking at... (15 Replies)
Hi
I have some sco xenix object, bin and archive files that operate in sco unix 5.0.7.
I know that sco unix kernel can support sco xenix binary. I want to know how can I link xenix and unix archives together? (0 Replies)
Hi all
I have installed a demo version of SCO OpenServer 5.0.2, I finally found it is Desktop Interface, I would like to know how to change its interface to dos based interface?
If you have any ideas, please tell me then. Thank you (2 Replies)
So today I tried to upgrade a customer from a Proliant with an HPSAS controller to an Intel server with a MEGASAS controller.
First, I downloaded the megasas driver from SCO and installed it on the old system.
Then I created a new Microlite Edge emergency boot cd with the new driver on it.
I... (2 Replies)
UNIX sco release 5.05 system does not boot:cannot open device hd(40)/boot
stage 1 boot failure: error loading hd(40)/bootWhat to do? (2 Replies)
Discussion started by: Joaoalpande
2 Replies
LEARN ABOUT OSF1
routes
routes(4) Kernel Interfaces Manual routes(4)NAME
routes - Specifies Internet routing information to the routing tables
SYNOPSIS
/etc/routes
DESCRIPTION
Static routes can be defined in the /etc/routes file. The /etc/routes file identifies static routes that are automatically added to the
network routing tables with the /usr/sbin/route add command. The /sbin/init.d/route script contains the /usr/sbin/route add command that
is executed for each entry in the /etc/routes file when the network is restarted on the system or the system is rebooted.
The general format of an entry in the /etc/routes file is: Dest Name1 Name2
The following is a brief description of each element in an /etc/routes file entry: A keyword that indicates whether the route is to a net-
work or to a host. The two possible keywords are -net and -host. The name or address of the destination network or host. Name1 can be
either a symbolic name (as used in the /etc/hosts or /etc/networks file) or an Internet address specified in dotted-decimal format. The
name or address of the gateway host to which messages should be forwarded. Name2 can be either a symbolic name (as used in the /etc/hosts
file) or an Internet address specified in dotted-decimal format.
The routes file is a Context-Dependent Symbolic Link (CDSL) and must be maintained as such. See the System Administration manual for more
information.
EXAMPLES
To specify a route to a network through a gateway host with an entry in the /etc/routes file, enter:
-net net2 host4
This example specifies a route to a network, net2, through the gateway host4. To specify a route to a host through a gateway host
with an entry in the /etc/routes file, enter:
-host host2 host4
This example specifies a route to a host, host2, through the gateway host4. To specify a route to a default gateway host with an
entry in the /etc/routes file, enter:
default 130.9.0.5
This example specifies a route to a default gateway with an Internet address of 130.9.0.5.
FILES
Contains the /usr/sbin/routed add command.
RELATED INFORMATION
Commands: route(8)
Daemons: gated(8), routed(8)
Files: gated.conf(4)
Network Administration delim off
routes(4)