I am new to shell scripting so I assume there is something basic I am missing but I have not been able to figure it out. When I run the following code from a script it can't find the paths to the directory or files. I can literally cut and paste the commands into terminal and they work fine. Why can't these paths be found when run from a script? I have done chmod 755 getup.sh.
Hello every one,
i am trying to compile c++ modules.
while compiling a module i am getting the following error.
cdbh_RecordStore.C:32:23: error: rw/regexp.h: No such file or directory
make: *** Error 1
I googled for the solution , i found that this is a Rogue wave class.
actually... (0 Replies)
Hi All,
I am using a shell script for SFTPing the files to target server. The problem which I am facing is that even if the files are not transferred, the script finishes successfully. I want the script to fail in case the remote directory does not exists.
The script which I am using is as... (1 Reply)
Hi,
I am installing gcc cross compiler for x86_64.
After installation when i am compiling simple program, i am getting error as
"/usr/cross/lib/gcc-lib/x86_64-pc-elf/3.2.3/../../../../x86_64-pc-elf/bin/ld: cannot open crt0.o: No such file or directory"
Please tell me how to resolve this... (1 Reply)
hi,
I get this error when I compile my source on mac Leopard.
is because I need to configure openGL path ?
Monitor.h:15:60: error: GL/glut.h: No such file or directory
Monitor.h:16:60: error: GL/gl.h: No such file or directory
Monitor.C: In function 'void display2()':
Monitor.C:77:... (0 Replies)
Hi,
I am trying to do scp using the following script:
#!/usr/local/bin/bash
BUILDDATE=20120220
for line in `cat arch_host_plat_src_dest`
do
src=`echo $line | cut -d: -f4`
dest=`echo $line | cut -d: -f5`
echo scp -p /builds/${BUILDDATE}/Integration/$src ... (1 Reply)
Hi,
I have issued the below command to remove directories under a specific path, it removes them fine. But atlast it tries to
find the same directory and fails.
Directories:
/root/app/dir
/root/app/dir/files/
/root/app/dir/backup/
/root/app/dir/archive/
Command:
find... (1 Reply)
Hi,
After executing load_data.sh script , it completes the steps in script but give following error.Please let me know how to fix it.
./load_data.sh: ' missing
./load_data.sh: 0: not found
for i in 1 2 3
do
###some processing####
DLOG=$( eval echo \${TXPCY_${i}_DATA_FILE_LOG} )... (4 Replies)
Hi,
I am getting below error in Solaris 10 SPARC when trying to issue a search on /var/tmp partition
Below is the query
/bin/find /var/tmp/ -type f -atime +1
Below is the result
/bin/find: stat() error <File> : No such file or directory (28 Replies)
Hi! I just recently started messing around with Unix, but I've come upon one problem multiple times. Whenever I try to run a shell script, for example;
#! /bin/bash
#--------------------------------------
# example1
#--------------------------------------
echo "Hello, World!"
I... (5 Replies)
Hi Everyone,
I am trying to make this script to use, to find out the DAHDI channel status. Every thing works fine, I even get proper results, however I have this weird error that comes along.
Can someone please help me. Thanks a lot.
#!/bin/bash
# Color to set the test to when a channel is... (3 Replies)
Discussion started by: jeetz
3 Replies
LEARN ABOUT CENTOS
perlos400
PERLOS400(1) Perl Programmers Reference Guide PERLOS400(1)NAME
perlos400 - Perl version 5 on OS/400
DESCRIPTION
This document describes various features of IBM's OS/400 operating system that will affect how Perl version 5 (hereafter just Perl) is
compiled and/or runs.
By far the easiest way to build Perl for OS/400 is to use the PASE (Portable Application Solutions Environment), for more information see
<http://www.iseries.ibm.com/developer/factory/pase/index.html> This environment allows one to use AIX APIs while programming, and it
provides a runtime that allows AIX binaries to execute directly on the PowerPC iSeries.
Compiling Perl for OS/400 PASE
The recommended way to build Perl for the OS/400 PASE is to build the Perl 5 source code (release 5.8.1 or later) under AIX.
The trick is to give a special parameter to the Configure shell script when running it on AIX:
sh Configure -DPASE ...
The default installation directory of Perl under PASE is /QOpenSys/perl. This can be modified if needed with Configure parameter
-Dprefix=/some/dir.
Starting from OS/400 V5R2 the IBM Visual Age compiler is supported on OS/400 PASE, so it is possible to build Perl natively on OS/400. The
easier way, however, is to compile in AIX, as just described.
If you don't want to install the compiled Perl in AIX into /QOpenSys (for packaging it before copying it to PASE), you can use a Configure
parameter: -Dinstallprefix=/tmp/QOpenSys/perl. This will cause the "make install" to install everything into that directory, while the
installed files still think they are (will be) in /QOpenSys/perl.
If building natively on PASE, please do the build under the /QOpenSys directory, since Perl is happier when built on a case sensitive
filesystem.
Installing Perl in OS/400 PASE
If you are compiling on AIX, simply do a "make install" on the AIX box. Once the install finishes, tar up the /QOpenSys/perl directory.
Transfer the tarball to the OS/400 using FTP with the following commands:
> binary
> site namefmt 1
> put perl.tar /QOpenSys
Once you have it on, simply bring up a PASE shell and extract the tarball.
If you are compiling in PASE, then "make install" is the only thing you will need to do.
The default path for perl binary is /QOpenSys/perl/bin/perl. You'll want to symlink /QOpenSys/usr/bin/perl to this file so you don't have
to modify your path.
Using Perl in OS/400 PASE
Perl in PASE may be used in the same manner as you would use Perl on AIX.
Scripts starting with #!/usr/bin/perl should work if you have /QOpenSys/usr/bin/perl symlinked to your perl binary. This will not work if
you've done a setuid/setgid or have environment variable PASE_EXEC_QOPENSYS="N". If you have V5R1, you'll need to get the latest PTFs to
have this feature. Scripts starting with #!/QOpenSys/perl/bin/perl should always work.
Known Problems
When compiling in PASE, there is no "oslevel" command. Therefore, you may want to create a script called "oslevel" that echoes the level
of AIX that your version of PASE runtime supports. If you're unsure, consult your documentation or use "4.3.3.0".
If you have test cases that fail, check for the existence of spool files. The test case may be trying to use a syscall that is not
implemented in PASE. To avoid the SIGILL, try setting the PASE_SYSCALL_NOSIGILL environment variable or have a handler for the SIGILL. If
you can compile programs for PASE, run the config script and edit config.sh when it gives you the option. If you want to remove fchdir(),
which isn't implement in V5R1, simply change the line that says:
d_fchdir='define'
to
d_fchdir='undef'
and then compile Perl. The places where fchdir() is used have alternatives for systems that do not have fchdir() available.
Perl on ILE
There exists a port of Perl to the ILE environment. This port, however, is based quite an old release of Perl, Perl 5.00502 (August 1998).
(As of July 2002 the latest release of Perl is 5.8.0, and even 5.6.1 has been out since April 2001.) If you need to run Perl on ILE,
though, you may need this older port: <http://www.cpan.org/ports/#os400> Note that any Perl release later than 5.00502 has not been ported
to ILE.
If you need to use Perl in the ILE environment, you may want to consider using Qp2RunPase() to call the PASE version of Perl.
AUTHORS
Jarkko Hietaniemi <jhi@iki.fi> Bryan Logan <bryanlog@us.ibm.com> David Larson <larson1@us.ibm.com>
perl v5.16.3 2013-03-04 PERLOS400(1)