Sponsored Content
Operating Systems Linux Unable to add route with a specific gateway IP Post 303030863 by anaigini45 on Monday 18th of February 2019 04:23:16 AM
Old 02-18-2019
Hi,

Thank you for your reply. However, there are no two servers involved, only one. These are the outputs requested :

Code:
[root@SIEMsmartcon3 ~]# arp -a
? (10.132.81.164) at 00.17:a4:77;a4:56 [ether] on eno50
? (10.132.81.162) at ec:eb:b8:9f:01:26 [ether] on eno50
? (10.132.81.161) at 00:10:db:ff:20:04 [ether] on eno50 gateway (10.132.81.145) at 00:10:db:ff:20:04 [ether] on eno49
? (10.132.81.147) at 00:17:a4:77:a4:52 [ether] on eno49

[root@SIEMsmartcon3 ~]# arp -e
Address		HWtype	HWaddress		Flags Mask	Iface
10.132.81.164	ether	00:17:a4:77:a4:56	C		eno50
10.132.81.162	ether	ec:eb:b8:9f:01:26	C		eno50
10.132.81.161	ether	00:10:db:ff:20:04	C		eno50
gateway		ether	00:10:db:ff:20:04	C		eno49
10.132.81.147	ether	00:17:a4:77:a4:52	C		eno49

Best Regards,
anaigini45
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Add route gateway -> Restart !! Lose it

:confused: Hi: I donīt know how to add route gateway and when restart the machine lose this route and put other. In SCO ver 5.6 Enterprise write: etc\route delete gateway route add gateway 199.199.1.1. so , netstat -rn to see if has change -> all ok Restart -> !!!... (2 Replies)
Discussion started by: AlvaroD
2 Replies

2. AIX

route add

Hello , We have 3 rs/6000 server's running aix on our local network, so each time I try to ping one of these servers we get a "network is down" error , I've been instructed to use to route add command which is ... #route add server.ip router.ip after this the ping command works fine ,... (6 Replies)
Discussion started by: cubicle^dweller
6 Replies

3. IP Networking

Do I need to add a route??

I have two networks connected by cisco routers. My first subnet is 192.168.0.0 and my second is 192.168.1.0. My SCO unix machine is on the 192.168.1.0 subnet with an IP of 192.168.1.231. It can see the entire .1.0 subnet but nothing on the other network. My cicso router(gateway) to the other... (6 Replies)
Discussion started by: agoodrich
6 Replies

4. Shell Programming and Scripting

script to change default route when primary gateway dies

Hello all! We have two fedora routers one at each site. What we are trying to do worked using freesco but not on fedora, i'm not very good at scripting and need a little guidence. Basicly what we are trying to do is if the primary line dies, the router will change it's routes to go through our... (0 Replies)
Discussion started by: slacker
0 Replies

5. IP Networking

Unable to ping the gateway IP itself

We are unable to bring one of our linux boxes into the network once it was restarted. But once we stop and start the network service. We are able to ping the gateway and get into network. After a minute or two we get the following reponse for the ping command 64 bytes from 124.168.215.40:... (6 Replies)
Discussion started by: chrisanto_2000
6 Replies

6. Solaris

Route Add

Hi, I am trying to add route command in Solaris 10 machine in the following fashion: route add -host 10.8.112.10 180.144.1.250 -interface lo0:1 this command fails with an error "lo0:1: bad value" I want to add a route to 10.8.112.10 that picks 180.144.1.250 as the gateway via the... (3 Replies)
Discussion started by: sudhir_shet
3 Replies

7. AIX

IBM Server doesn't ping gateway unless you put a static route

Just want to know if someone has a clue about what could be happening here: I have an AIX box with four NICs in Ether channel connected to a Cisco Switch. When I try to ping the default gateway, sometimes it works, but sometimes it doesn't work unless it has a defined static route. Thanks... (1 Reply)
Discussion started by: witt
1 Replies

8. UNIX for Advanced & Expert Users

Unable to ping default gateway

I have setup a Linux machine on my server but for some reason Im unable to reach my default gateway. This is causing me to not communicate with the outside world (unable to connect to CentOS repos) # ifconfig enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet... (3 Replies)
Discussion started by: Junaid Subhani
3 Replies

9. Red Hat

Set new gateway for route to internet

Hi all, i have a rhel 6.2 with a default gateway. This server is an Intranet office with no internet access. DNS are already configured and it's possible to resolve my target. My goal is to link my application (apache forward) only to http://mytarget.yyy through a new gateway (That does... (0 Replies)
Discussion started by: kamose
0 Replies

10. UNIX for Beginners Questions & Answers

Inconsistency between RedHat 6.5 global gateway and single gateway leads to loss of default gateway

Dear friends I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Discussion started by: tanpeng
6 Replies
IPROUTE(3)						     Library Functions Manual							IPROUTE(3)

NAME
iproute - Internet route table manager SYNOPSIS
bind -a #P /net /net/iproute /net/ipifc DESCRIPTION
The iproute device allows the specification of routes for families of IP addresses. It maintains a kernel-resident routing table for IP addresses used by TCP, IL and UDP. Each route consists of a destination IP address, an IP mask, and an IP gateway address. Every packet sent by the system is routed according to the route table. An address matches the route table entry when a packet's destination address matches the table destination address under the mask. When a match is found, the packet is sent to the gateway IP address. If there is no match, the packet is sent with the original destination address. If there are several matches, the one whose mask has the fewest leading zeros is chosen. (Because of the definition of IP masks, this mask preserves the largest portion of the address and is therefore the most specific.) This is forced by storing the routes in decreasing number of ones order and returning the first match. The default gateway has no ones in the mask and is thus the last matched. Reading iproute reports the current routes entered in the table. Writing control messages to iproute edits the table. Route entries are made by writing a string of format add ipdest mask ipgateway Entries are deleted by writing a string of format delete ipdest mask The whole table can be cleared by writing the string For example, to install a gateway address to accept all IP packets from a machine: % echo 'add 0.0.0.0 0.0.0.0 131.107.1.5' > /net/iproute % cat /net/iproute 0.0.0.0 & 0.0.0.0 -> 131.107.1.5 Reading ipifc reports the current IP interfaces being used, one line per interface, showing the device, the maximum transfer unit, the local address, the network mask, and the network address. SOURCE
/sys/src/9/port/deviproute.c SEE ALSO
ip(3), ipconfig(8) IPROUTE(3)
All times are GMT -4. The time now is 12:18 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy