Thanks.. I've proceeded further along but have finally hit a snag.
I was unable to install boot blocks using this:
I get syntax error: '(` unexpected
So, I skipped the step because my notes said I may have to install boot blocks, not definitely have to. I'm reusing an old drive and thought its probably already there.
But at this point, when I try to boot to the root volume in single user mode # boot -sw I get
Is this a boot block issue?
--- Post updated at 09:39 AM ---
I'm suspicious of uname and the device. (and the number for that matter)
Should it be something more like:
or:
0 is my root slice and 3 is my usr so I'm not sure which would be right
Hi there,
I have a problem at the moment trying to restore a directory from a Super DLT tape with about 3 weeks worth of backups on it. I need to be able to get the last backup performed on this tape but using ufsrestore -i it only restores the first backup which is no good to me. There is... (4 Replies)
on sparc solaris 2.8 hosts, HOSTB, after changing to /dir1 need to:
connect to tape drive on HostA. change directory to /dir0/dir1 on tape and
restore everything under that path to /dir1 directory.
could i get help?. (1 Reply)
I just installed solaris 9 on a sunblade 150(sparc), and have it partitioned. I've been using ufsrestore to restore bring the config from my old system, to the sunblade. I'm not having any luck. The root directory restore seems to work. When I try to restore /usr, I get an "/usr/sbin/fsck not... (4 Replies)
I'm trying to restore a server from a backup tape. I've partitioned my drive, and I've run into a problem; After extracting everything from the tape, It seems as if only the directory structure is intact. Here are my steps:
1. booted from cdrom to single user mode boot cdrom -s
2. used... (3 Replies)
Hello Folks,
I have to restore from remote tape sun solaris 10. It has to have mirror raid.
I have to restore /,/usr, /var,/opt, /etc,/u01.
Could you please give me detailed steps to do the above?
I am new to solaris
Thanks
Ram (1 Reply)
HI Gurus,
I have a sunfire V445 server running SAP ECC 6.0 with an Oracle database on Solaris 9 (SunOS 5.9). I recently completed a ufsdump to tape of the following files:-
/,
/usr,
/oracle,
/export,
/sapr3,
I want to restore these files from tape onto a different server of the same... (5 Replies)
Hi , I accidentally deleted crontab entries and I need to restore back urgently ! we use a ufsdump with 0cfu option. I like to know how to restrore / retrieve to different location for crontab file only from the backup. Thanks. (4 Replies)
hey all,
i did a ufsdump/restore from a mirrored system and i'm not able to get the new system to boot off of the dump.
system 1 is a v245 mirrored with disk suite. metadb's are in place
d3 -m d23 d13 d33 1
d23 1 1 c1t1d0s3
d13 1 1 c1t0d0s3
d33 1 1 c1t2d0s3
d0 -m d20 d10 d30 1
d20 1... (3 Replies)
hi, on my sol9 box i create my backup using the below command:
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u1
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u2
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u3
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u4
now on the new sol10 box, to restore i use this commands:
cd /u1... (3 Replies)
Good Afternoon,
I'm going to attempt a ufsrestore of a Solaris 9 machine from a connected NAS containing the ufsdumps. The idea is to be able to take ufsdumps of a failed machine (machine 1), and use them to set up a backup machine (machine 2). (I'm testing for disaster recovery)
Note... (52 Replies)
Discussion started by: Stellaman1977
52 Replies
LEARN ABOUT CENTOS
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)