INITRAMFS.CONF(5)					       initramfs.conf manual						 INITRAMFS.CONF(5)

NAME

       initramfs.conf - configuration file for mkinitramfs

DESCRIPTION

       The behaviour of mkinitramfs can be modified by its configuration file.

       Each  line in the file can be a configuration variable, a blank line, or a comment. The value of an variable is assigned by an statement of
       the form: name=[value]

       Configuration options can be broken out into configuration snippets and placed in individual files in  the  /etc/mkinitramfs/conf.d  direc-
       tory.   Files in this directory are always read after the main configuration file, so you can override the settings in the main config file
       without editing it directly.

GENERAL VARIABLES

	MODULES
	      Specifies the modules for the initramfs image.

	      Modules listed in /etc/initramfs-tools/modules and /usr/share/initramfs-tools/modules.d/* are always included in the initramfs,  and
	      are loaded early in the boot process.

	      list doesn't load any additional modules at boot time, other than those listed in the above files.

	      most adds most file system, all ata, sata, scsi and usb drivers.

	      dep tries to guess which modules are necessary for the running box and only adds those modules.

	      netboot adds the base and network modules, but skips block devices.

	      The default setting is most.

	BUSYBOX
	      Include  busybox	utilities  for	the boot scripts.  If set to 'n' mkinitramfs will build an initramfs without busybox.  Beware that
	      many boot scripts need busybox utilities.

	KEYMAP
	      If set to 'y', the console keymap will be loaded during the initramfs stage.  The keymap will anyway be loaded  by  the  initscripts
	      later,  and the packages that might need input will normally set this variable automatically, so there should normally be no need to
	      set this.

	COMPRESS
	      Specifies the compression method used for the initramfs image.  mkinitramfs will default to gzip if the kernel lacks  support  (CON-
	      FIG_RD) or the corresponding userspace utility is not present.

	UMASK Set the umask value of the generated initramfs file.  Useful to not disclose eventual keys.

NFS VARIABLES

	BOOT  Allows  one  to use an nfs drive as the root of the drive.  The default is to boot from local media (hard drive, USB stick).  Set to
	      nfs for an NFS root share.

	DEVICE
	      Specifies the network interface, like eth0.

	ROOT  Allows optional root bootarg hardcoding, when no root bootarg can be passed.  A root bootarg overrides that special setting.

	NFSROOT
	      Defaults to auto in order to pick up value from DHCP server.  Otherwise you need to specify HOST:MOUNT.

FILES

       /etc/initramfs-tools/initramfs.conf

AUTHOR

       The initramfs-tools are written by Maximilian Attems <maks@debian.org>, Jeff  Bailey  <jbailey@raspberryginger.com>  and  numerous  others.
       Loosely based on mkinitrd.conf by Herbert Xu.

SEE ALSO

	initramfs-tools(8), mkinitramfs(8), update-initramfs(8).

Linux								    2010/11/22							 INITRAMFS.CONF(5)