I downloaded 11.3 and recreated bootable USB
But I am not able to boot from this USB drive. It doesn't even try to search and then give up. as soon as I hit boot command, it fails instantly. So I am assuming, probably I am not giving proper/complete path ?
OBP 4.27 is minimum required OBP level for USB support and I have 4.33
Hi
I am trying to create a fedora 11 usb boot disk for my acer aspire note book.
Problem is the only access i have to another machine is a mac running leopard.
Can some one tell me how i go about this please
Treds (3 Replies)
One of our T5220 servers fail to boot due to following error:
ERROR: The following devices are disabled:
XAUI1
XAUI0
I can't see any disabled components in SP console, any idea what is the problem? (1 Reply)
I am trying to dual boot on an external USB 500GB drive using my laptop.I have Windows 7 installed and booting on 1st partition 230GB now as active primary, 2nd partition is 100GB as primary, and 3rd partition is 135GB as primary. I was intending on installing Ubuntu onto the 2nd partition. I read... (12 Replies)
I have small problem: my hard drive has 500GB storage and it is divided into partitions
/dev/sda1 - 20 GB (boot)
/dev/sda2 - rest
I want to clone only one partition /dev/sda1 and write all data on my USB stick /dev/sdb
What's more I want to make my USB bootable and I don't know at all how can... (3 Replies)
I have three Sun Oracle Netra T5220s. I am trying to just get the processor information psrinfo or prtdiag -v from the # prompt in single user mode.
I am needing to know the commands to get to boot the CD/DVD of the Solaris OS. I am using it via Serial Port Management.
Tinkering around I... (4 Replies)
Hello all,
I am looking for a way to copy the existing Ubuntu server 12.04 to a USB (with all the packages and such) and make it boot from the USB.
I have seen other threads about copying the CD image to the USB, which is not exactly I am looking for.
Before I start diving into anything I... (4 Replies)
hi:)
i can't boot my sun server by iso solaris 10 sparc dvd that i did download from oracle site.
my hardware is sun T5220.
i receive these after running boot cdrom -s :
can't read disk lable
can't open disk lable package
ERROR: boot-read fail
whould u help me?
Please use CODE... (1 Reply)
Discussion started by: Arefdel
1 Replies
LEARN ABOUT FREEBSD
usb_template
USB_TEMPLATE(4) BSD Kernel Interfaces Manual USB_TEMPLATE(4)NAME
usb_template -- USB templates
SYNOPSIS
To compile this module into the kernel, place the following line in your kernel configuration file:
device usb_template
To load the module at boot time, place the following line in loader.conf(5):
usb_template_load="YES"
DESCRIPTION
The usb_template module implements various USB templates that are needed when programming an USB device side driver. A USB template consists
of an USB device descriptor, one or more USB configuration descriptors, one or more USB interface descriptors, one or more USB endpoint
descriptors, USB strings and additional USB descriptors. The USB template module currently has templates for USB Mass Storage, USB CDC Eth-
ernet and Message Transfer Protocol. USB templates are currently selected using the "hw.usb.template" sysctl. The "hw.usb.template" value
can be changed at any time, but will not have any effect until the USB device has been re-enumerated.
SEE ALSO usb(4)STANDARDS
The usb_template module complies to the USB 1.0, 2.0 and 3.0 standard.
HISTORY
The usb_template module was written by Hans Petter Selasky <hselasky@FreeBSD.org>.
BSD March 18, 2014 BSD