T5220 not able to boot from USB Post: 303029255

Sponsored Content

Operating Systems Solaris T5220 not able to boot from USB Post 303029255 by solaris_1977 on Wednesday 23rd of January 2019 05:38:35 PM

01-23-2019

Registered User

I downloaded 11.3 and recreated bootable USB

Code:

root@sparc1:/var/tmp# usbcopy sol-11_3-text-sparc.usb
Image type: dd-able Sparc
Found the following USB devices:
0:      /dev/rdsk/c10t0d0s2     15.2 GB General  UDisk            5.00
Enter the number of your choice: 0

WARNING: All data on your USB storage will be lost.
Are you sure you want to install to
General UDisk 5.00, 15200 MB at /dev/rdsk/c10t0d0s2 ?  (y/n) y
Copying and verifying image to USB device
Finished 991 MB in 255 seconds (3.8MB/s)
0 block(s) re-written due to verification failure
Completed copy to USB
root@sparc1:/var/tmp#

But I am not able to boot from this USB drive. It doesn't even try to search and then give up. as soon as I hit boot command, it fails instantly. So I am assuming, probably I am not giving proper/complete path ?
OBP 4.27 is minimum required OBP level for USB support and I have 4.33

Code:

{0} ok .version
Release 4.33.4  created 2011/11/17 13:46
{0} ok
{0} ok reset-all


Sun Netra T5220, No Keyboard
Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.33.4, 8064 MB memory available, Serial #88344684.
Ethernet address 0:21:28:44:8:6c, Host ID: 8544086c.



{0} ok probe-scsi-all
/pci@0/pci@0/pci@2/scsi@0

MPT Version 1.05, Firmware Version 1.27.00.00

Target 0
Unit 0   Disk     SEAGATE ST930003SSUN300G0D70    585937500 Blocks, 300 GB
  SASAddress 5000c5003321f43d  PhyNum 0
Target 1
Unit 0   Disk     SEAGATE ST930003SSUN300G0D70    585937500 Blocks, 300 GB
  SASAddress 5000c5001afc2f6d  PhyNum 1

/pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@3
  Unit 0   Removable Disk     General UDisk           5.00

{0} ok boot /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@3
Boot device: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@3  File and args:
ERROR: boot-read fail


Boot load failed

{0} ok

solaris_1977

View Public Profile for solaris_1977

Find all posts by solaris_1977

8 More Discussions You Might Find Interesting

1. Linux

How to boot Fedora 8 from USB

Hi, friends, can anyone suggest me how to boot fedora 8 from USB flash drive? thanks. :confused:

2. Linux

Usb Boot

Hi I am trying to create a fedora 11 usb boot disk for my acer aspire note book. Problem is the only access i have to another machine is a mac running leopard. Can some one tell me how i go about this please Treds

3. Solaris

T5220 fails to boot

One of our T5220 servers fail to boot due to following error: ERROR: The following devices are disabled: XAUI1 XAUI0 I can't see any disabled components in SP console, any idea what is the problem?

4. Ubuntu

[SOLVED] Dual boot Windows 7 and Ubuntu on USB

I am trying to dual boot on an external USB 500GB drive using my laptop.I have Windows 7 installed and booting on 1st partition 230GB now as active primary, 2nd partition is 100GB as primary, and 3rd partition is 135GB as primary. I was intending on installing Ubuntu onto the 2nd partition. I read...

5. Ubuntu

Clone one partition and boot from USB

I have small problem: my hard drive has 500GB storage and it is divided into partitions /dev/sda1 - 20 GB (boot) /dev/sda2 - rest I want to clone only one partition /dev/sda1 and write all data on my USB stick /dev/sdb What's more I want to make my USB bootable and I don't know at all how can...

6. Solaris

Trying to boot Solaris without hard drives in T5220

I have three Sun Oracle Netra T5220s. I am trying to just get the processor information psrinfo or prtdiag -v from the # prompt in single user mode. I am needing to know the commands to get to boot the CD/DVD of the Solaris OS. I am using it via Serial Port Management. Tinkering around I...

7. Ubuntu

Copy existing Ubuntu to boot from USB

Hello all, I am looking for a way to copy the existing Ubuntu server 12.04 to a USB (with all the packages and such) and make it boot from the USB. I have seen other threads about copying the CD image to the USB, which is not exactly I am looking for. Before I start diving into anything I...

8. Solaris

I can't boot my Sun T5220 server from cdrom.

hi:) i can't boot my sun server by iso solaris 10 sparc dvd that i did download from oracle site. my hardware is sun T5220. i receive these after running boot cdrom -s : can't read disk lable can't open disk lable package ERROR: boot-read fail whould u help me? Please use CODE...

LEARN ABOUT CENTOS

hwloc_obj_attr_u_hwloc_bridge_attr_s

hwloc_obj_attr_u::hwloc_bridge_attr_s(3)		     Hardware Locality (hwloc)			  hwloc_obj_attr_u::hwloc_bridge_attr_s(3)

NAME

       hwloc_obj_attr_u::hwloc_bridge_attr_s -

SYNOPSIS

       #include <hwloc.h>

   Data Fields
       union {
	  struct hwloc_pcidev_attr_s pci
       } upstream
       hwloc_obj_bridge_type_t upstream_type
       union {
	  struct {
	     unsigned short domain
	     unsigned char secondary_bus
	     unsigned char subordinate_bus
	  } pci
       } downstream
       hwloc_obj_bridge_type_t downstream_type
       unsigned depth

Detailed Description
       Bridge specific Object Attribues.

Field Documentation
   unsigned hwloc_obj_attr_u::hwloc_bridge_attr_s::depth
   unsigned short hwloc_obj_attr_u::hwloc_bridge_attr_s::domain
   union { ... }   hwloc_obj_attr_u::hwloc_bridge_attr_s::downstream
   hwloc_obj_bridge_type_t hwloc_obj_attr_u::hwloc_bridge_attr_s::downstream_type
   struct hwloc_pcidev_attr_s hwloc_obj_attr_u::hwloc_bridge_attr_s::pci
   struct { ... }   hwloc_obj_attr_u::hwloc_bridge_attr_s::pci
   unsigned char hwloc_obj_attr_u::hwloc_bridge_attr_s::secondary_bus
   unsigned char hwloc_obj_attr_u::hwloc_bridge_attr_s::subordinate_bus
   union { ... }   hwloc_obj_attr_u::hwloc_bridge_attr_s::upstream
   hwloc_obj_bridge_type_t hwloc_obj_attr_u::hwloc_bridge_attr_s::upstream_type
Author
       Generated automatically by Doxygen for Hardware Locality (hwloc) from the source code.

Version 1.7							  Sun Apr 7 2013			  hwloc_obj_attr_u::hwloc_bridge_attr_s(3)