01-23-2019
SCO 5.0.7 server - Message - Root Account is disabled - but allowing entry via daemon.
SCO 5.0.7 server on an HP Proliant ML350G5 with E200 raid controller.
The message on the server during boot says this message in several places. "Root Account Disabled, but allowing entry via deamon"
At this point, there are some hardware issues to work through first. One is that we don't have a working floppy to boot that includes the Raid controller driver, but we also suspect the floppy drive itself is also failed. (Along with other critical systems) Dat Drive, 1 raid drive, Raid Controller battery.
This company that is begging for help now basically left it in the closet and never did any maintenance or ever even changed the tape.
So my question is really 2 fold.
1. Is there anyone out there that has one of these systems that could provide disk images that are preloaded to work with the HP E200 SAS controller for SCO so we can reset the root login?
2. What steps would be needed to reset the root login and correct the Daemon only issue? Any advice would be helpful.
9 More Discussions You Might Find Interesting
1. Cybersecurity
I need to set up an application to run in a script which will be running as a web server but is a database. I need to allow users to use the web server but the app must be run as root in order for the ports to be accessible. This is not a very secure environment would like to know how this could... (2 Replies)
Discussion started by: rpollard
2 Replies
2. UNIX for Dummies Questions & Answers
I am very new to Unix. We have a Unix user account that was disabled due to multiple tries with an invalid password. How to enable the account? (1 Reply)
Discussion started by: kajap
1 Replies
3. HP-UX
Hi, hope someone could help me here:
Our root account was disabled on our production server this morning and usually we would login at the console to re-enable the account. However we are unable to get a login prompt at the console. The console displays the 8 options along the bottom and a... (2 Replies)
Discussion started by: AaronC
2 Replies
4. AIX
Hi, yesterday, I changed root's shell in /etc/passwd, cause a mistake then I can not log in root account (can't find correct shell). I attempted to log in single-mode, however, it prompted for single-mode's password then I type root's password but still can not log in.
I'm using AIX 5L version 5.2... (2 Replies)
Discussion started by: neikel
2 Replies
5. HP-UX
I frequently rexec into a remote box to run a job, occaisionally I get the the error message "rexecd: Account Disabled" and in the remote box syslog I see "rexecd: PAM - status 28 PAM error message: account is disabled". After a 1/2 hour or so the problem goes away. Anyone shed any light on... (0 Replies)
Discussion started by: CBorgia
0 Replies
6. HP-UX
Hi.
I have an issue with root account. System doesn't let me to log on, because accound is disabled/locked.
This problem since I have converted passwords file to data base using SAM.
I didn't change user's parameters.
Somebody knows how can i enable my root account back? (14 Replies)
Discussion started by: netwalker
14 Replies
7. Solaris
HI i am trying to give su access to some users say X Y and Z to a account AB . I am able to give them su access to root with the help of sudoers file but i want to give them password less access to AB account which i am not able to do .
I want to this
when user X fires "su - AB" he is not... (9 Replies)
Discussion started by: rishiraaz
9 Replies
8. How to Post in the The UNIX and Linux Forums
Hi All,
Please help me and guide me to write a bash/shell script on Linux box to delete parent entry with all their child entries.
example:
Parent is :
----------
dn: email=yogesh.kumar@wipro.com, o=wipro, o=in
child is:
----------
dn: cn: yogesh kumar, email=yogesh.kumar@wipro.com,... (1 Reply)
Discussion started by: Chand
1 Replies
9. UNIX for Advanced & Expert Users
Hello Gurus,
I want One user to su to another without allowing root access and password.
I want to run a specific command as below from user am663:
---------------------------------------------------------
sudo -u appsprj4 /home/appsrj4/scripts/start_apache.sh
-------------------
But... (6 Replies)
Discussion started by: pokhraj_d
6 Replies
rmtab(5nfs) rmtab(5nfs)
Name
rmtab - table of local file systems mounted by remote NFS clients
Description
The file resides in the directory and contains a list of all remote hosts that have mounted local file systems using the NFS protocols.
Whenever a client performs a remote mount, the server machine's mount daemon makes an entry in the server machine's file. The command
instructs the server's mount daemon to remove the entry. The -b command broadcasts to all servers and informs them that they should remove
all entries from created by the sender of the broadcast message. By placing a -b command in tables on NFS servers can be purged of entries
made by a crashed client, who, upon rebooting, did not remount the same file systems that it had before the system crashed. The file is a
series of lines of the form:
hostname:directory
Rather than rewrite the rmtab file on each request, the mount daemon comments out unmounted entries by placing a number sign (#) in the
first character position of the appropriate line. The mount daemon rewrites the entire file, without commented out entries, no more fre-
quently than every 30 minutes. The frequency depends on the occurrence of requests.
This table is used only to preserve information between crashes and is read only by when it starts up. The daemon keeps an in-core table,
which it uses to handle requests from programs like and
Restrictions
Although the table is close to the truth, it may contain erroneous information if NFS client machines fail to execute -a when they reboot.
Files
See Also
mount(8nfs), umount(8nfs), mountd(8nfs), showmount(8nfs), shutdown(8)
rmtab(5nfs)