01-18-2019
Quote:
Originally Posted by
Don Cragun
As noted in the message marked in red above... maybe the boot command is expecting you to provide the pathname of a file on the CD-ROM and not just the -s argument to be passed to it???
What operating system and hardware are you using?
Sorry I left stuff out.. Solaris 9 on a Sun SunBlade 2500 Sparc.
--- Post updated at 08:42 AM ---
Quote:
Originally Posted by
MadeInGermany
The command is correct for Solaris Sparc, and a CD with a Solaris boot block should work.
Is the CD okay? Cloned ones can miss the boot block.
Can also be a defective cdrom drive (does it work otherwise?).
Or a firmware bug: after a couple of boots need a reset at the Ok prompt (maybe first set auto-boot to false).
The CDs I've tried are originals. I've tried the Operating Environment and the "Software 1 of 2" CDs. I've tried about 5 CDs altogether. I've restored this machine before and the drive worked at that time.
Last edited by Stellaman1977; 01-18-2019 at 10:27 AM..
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Could some one please tell the command used to boot from an external SCSI cdrom drive? from PROM level. (2 Replies)
Discussion started by: fishman2001
2 Replies
2. UNIX for Dummies Questions & Answers
I'm running a Ultra 60 and having problems booting from the cdrom. This is the error I get,
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
The file just loaded does not appear to be executable.
Any know what could be the problem here? I've even tried connecting a 2nd cdrom... (3 Replies)
Discussion started by: merlin
3 Replies
3. UNIX for Dummies Questions & Answers
Hi Everyone,
I have a problem. I'm trying too reinstall sun solaris 8.0 on may Sunfire 280r but solaris 9.0 is all ready installed. I tried to boot from cd rom it keeps telling me that File does not seem executable. I need to get Solaris 8.0 on this system. I have boot all ready in single mode... (4 Replies)
Discussion started by: Peterh
4 Replies
4. Solaris
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies
5. Solaris
I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6
I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
Discussion started by: Msororaji
11 Replies
6. Solaris
i am having a problem when trying to boot from cdrom. I received the below message
system is not bootable, boot command is disabledfound
how can i fix this.
also what is the key combination on ordinary keyboard for STOP+A. Is it ctrl+break? (2 Replies)
Discussion started by: shabu
2 Replies
7. Solaris
Hi all am trying to boot the system from cdrom in single user mode , however when i am giving command boot cdrom -s i am getting below error
Boot Device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0: f file and args:
Can't read disk label
Can't open disk label package
can,t open boot device
... (17 Replies)
Discussion started by: kumarmani
17 Replies
8. Solaris
iam traying to install o/s in spark machine it showing error
ok >boot cdrom
is showing error
short disk read
failed to read superblock
the file just loaded does not appear to excutable
how to solve this can u help me (6 Replies)
Discussion started by: tirupathi
6 Replies
9. Solaris
Hi community,
Does anyone can tell me the difference between "boot cdrom" and "boot cdrom - install" ?
Thank you very much:D (3 Replies)
Discussion started by: Sunb3
3 Replies
10. Hardware
I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but... (1 Reply)
Discussion started by: powwm
1 Replies
LEARN ABOUT SUNOS
installgrub
installgrub(1M) installgrub(1M)
NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)