Md0 raid don't see my folders Post: 303028934

Sponsored Content

Operating Systems Linux Ubuntu Md0 raid don't see my folders Post 303028934 by tomislav91 on Friday 18th of January 2019 04:12:51 AM

01-18-2019

Registered User

Md0 raid don't see my folders

I suddenly don't see my folders into /mnt/md0.
What can be reason?

Code:

 mdadm --detail /dev/md*
/dev/md0:
        Version : 1.2
  Creation Time : Fri Jan 18 09:54:27 2019
     Raid Level : raid1
     Array Size : 1953383488 (1862.89 GiB 2000.26 GB)
  Used Dev Size : 1953383488 (1862.89 GiB 2000.26 GB)
   Raid Devices : 2
  Total Devices : 2
    Persistence : Superblock is persistent

  Intent Bitmap : Internal

    Update Time : Fri Jan 18 10:03:38 2019
          State : active, resyncing
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0

  Resync Status : 4% complete

           Name : myuser:0  (local to host myuser)
           UUID : 26f5fe1c:1c272ebe:74d72e1e:0360a892
         Events : 112

    Number   Major   Minor   RaidDevice State
       0       8       16        0      active sync   /dev/sdb
       1       8       32        1      active sync   /dev/sdc

Code:

cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md0 : active raid1 sdc[1] sdb[0]
      1953383488 blocks super 1.2 [2/2] [UU]
      [>....................]  resync =  4.5% (89573888/1953383488) finish=214.3min speed=144938K/sec
      bitmap: 15/15 pages [60KB], 65536KB chunk

unused devices: <none>

Last edited by RudiC; 01-18-2019 at 07:36 AM.. Reason: Changed [QUOTE] tags to [CODE].

tomislav91

View Public Profile for tomislav91

Find all posts by tomislav91

8 More Discussions You Might Find Interesting

1. Solaris

RAID 5 mount points don't automount on boot

Hi, I set up a RAID 5 configuration and for some reason the volumes won't mount when the system boots. I have to manually mount them from the command line and all is fine. Here's the vfstab entries: #device device mount FS fsck mount mount #to mount ...

2. UNIX for Advanced & Expert Users

Bad magic number on /dev/md0

Hello All, (RHEL4) Few weeks ago I had posted a message in this forum about the problem I had when I replaced my two scsi disks and tried rebuild raid1 array. I somehow managed to up the system with working raid1 array. But the main problem persisted.. i.e when I reboot the system, mounting...

3. UNIX for Dummies Questions & Answers

Copying multiple folders to local machine (don't know folder names)

Hi. I'm trying to copy multiple folders from the remote machine to the local machine. I wrote a batch file to run an ftp window. The problem I am having is that the only command to copy files is mget *, and this copies only files, not folders. For example, ftp ts555 cd ts555/test ' test...

4. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help.

5. Linux

If i don't have raid disks can i shut down dmraid device-mapper?

hello my centOS newly installed system loading dmraid modules on startup I did remove all LVM/raid things from system installation menus and after installation too but dmraid is still there and he says: no raid disks found also I did modprobe -r dm_raid45 and it do remove it but only until...

6. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI...

7. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My...

8. Red Hat

RAID Configuration for IBM Serveraid-7k SCSI RAID Controller

Hello, I want to delete a RAID configuration an old server has. Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton? I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i...

LEARN ABOUT DEBIAN

mtp_libmtp_folder_struct

LIBMTP_folder_struct(3) 					      libmtp						   LIBMTP_folder_struct(3)

NAME

       libmtp - LIBMTP_folder_struct

SYNOPSIS

       #include <libmtp.h>

   Data Fields
       uint32_t folder_id
       uint32_t parent_id
       uint32_t storage_id
       char * name
       LIBMTP_folder_t * sibling
       LIBMTP_folder_t * child

Detailed Description
       MTP Folder structure

       Examples:
	   delfile.c, folders.c, getfile.c, newfolder.c, sendfile.c, and sendtr.c.

Field Documentation
   LIBMTP_folder_t* LIBMTP_folder_struct::child
       Child folder or NULL if no children

       Examples:
	   folders.c.

       Referenced by LIBMTP_destroy_folder_t(), LIBMTP_Find_Folder(), and LIBMTP_Get_Folder_List_For_Storage().

   uint32_t LIBMTP_folder_struct::folder_id
       Unique folder ID

       Examples:
	   folders.c.

       Referenced by LIBMTP_Find_Folder(), LIBMTP_Get_Folder_List_For_Storage(), LIBMTP_new_folder_t(), and LIBMTP_Set_Folder_Name().

   char* LIBMTP_folder_struct::name
       Name of folder

       Examples:
	   folders.c.

       Referenced by LIBMTP_destroy_folder_t(), LIBMTP_Get_Folder_List_For_Storage(), and LIBMTP_Set_Folder_Name().

   uint32_t LIBMTP_folder_struct::parent_id
       ID of parent folder

       Referenced by LIBMTP_Get_Folder_List_For_Storage().

   LIBMTP_folder_t* LIBMTP_folder_struct::sibling
       Next folder at same level or NULL if no more

       Examples:
	   folders.c.

       Referenced by LIBMTP_destroy_folder_t(), LIBMTP_Find_Folder(), and LIBMTP_Get_Folder_List_For_Storage().

   uint32_t LIBMTP_folder_struct::storage_id
       ID of storage holding this folder

       Referenced by LIBMTP_Get_Folder_List_For_Storage().

Author
       Generated automatically by Doxygen for libmtp from the source code.

Version 1.1.3							  Sun Feb 17 2013					   LIBMTP_folder_struct(3)