How do I keep an X session alive when my VPN/ssh disconnects so I can reconnect later? Post: 303028456

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Keep alive packet for control session in ftp data transfer

I'm new to UNIX. We are using SunOS5.9. In order to maintain the control session active during large file tranfers in ftp, i like to send keep alive packets for every 10 seconds.I like to know the steps to be done to achieve this. Please help me guys.Thanks in advance.

2. Solaris

How to reconnect to a disconnected remote ssh session

hi all How to reconnect to a disconnected remote ssh session on solaris 10 is there any way

3. Shell Programming and Scripting

could not send commands SSH session with Net::SSH::Expect

I am using Net::SSH::Expect to connect to the device(iLO) with SSH. After the $ssh->login() I'm able to view the prompt, but not able to send any coommands. With the putty I can connect to the device and execute the commands without any issues. Here is the sample script my $ssh =...

4. Ubuntu

SSH droping connections over a VPN

Hello friends, I'm connection to an external network using a VPN configured over an Ubuntu. The problem is that whenever I get connected to a remote computer using my VPN as router, after a while, sometimes short, sometimes long, sometimes immediately, the connection gets lost and I've to...

5. HP-UX

ssh session getting hung (smilar to hpux telnet session is getting hung after about 15 minutes)

Our network administrators implemented some sort of check to kill idle sessions and now burden is on us to run some sort of keep alive. Client based keep alive doesn't do a very good job. I have same issue with ssh. Does solution 2 provided above apply for ssh sessions also?

6. UNIX for Dummies Questions & Answers

SSH session

I ran a job using SSH and then used screen command followed by space bar. Then I ran the job. But after some hours, the internet connection was lost.This had happened to me before. I used to run the whole job again. Today I came across the fact that I could restart the jobs without having to do it...

7. UNIX for Advanced & Expert Users

Need Password-Less ssh with RSA-VPN

We have RSA SecureID softtoken key generator on my Windows machine. It generates new keys every 1 minute. Any HPUX server (be it ServerD or ServerP) requires my ID and the randomly generated RSA SecureID softtoken key from my Windows to login. I login to ServerD. Then I run a script...

8. IP Networking

VPN ssh access over RDP port?

Guys, Can I use an open RDP port to gain ssh access to my Linux server running the other side of our firewall? I work from home on the odd occasion, we only have RDP port 3389 available once logged into the VPN. I would rather ssh into my workstation without the need for a desktop display. ...

9. SCO

Telnet session disconnects abruptly

I have inherited and SCO OpenServer Release 6 server. The clients connect using telnet to get to a proprietary database application for Service tickets. The issue I am currently having is that the connection just stops abruptly and you can see "telnet session terminated" on the terminal emulation...

LEARN ABOUT DEBIAN

fiu-ctrl

fiu-ctrl(1)						      General Commands Manual						       fiu-ctrl(1)

NAME

       fiu-ctrl - a script to remote control programs using libfiu

SYNOPSIS

       fiu-ctrl [options] PID [PID ...]

DESCRIPTION

       fiu-ctrl is a script to enable/disable failure points in running programs that are using libfiu(3).

       Programs are usually launched using fiu-run(1), which enables libfiu's remote control capabilities without the need to modify the program's
       code.

       For additional documentation, go to the project's website at http://blitiri.com.ar/p/libfiu.

OPTIONS

       -c command
	      Run the given libfiu remote control command before executing the program (see below for reference).

       -f ctrlpath
	      Set the default prefix for remote control over named pipes. Defaults to "$TMPDIR/fiu-ctrl", or "/tmp/fiu-ctrl" if "$TMPDIR"  is  not
	      set, which is the usually correct for programs launched using fiu-run(1).

       Remote control commands are of the form "command param1=value1,param2=value2".  Valid commands are:

       'enable name=NAME'
	      Enables the NAME failure point unconditionally.

       'enable_random name=NAME,probability=P'
	      Enables the NAME failure point with a probability of P.

       'disable name=NAME'
	      Disables the NAME failure point.

       All of the enable* commands can also optionally take failnum and failinfo parameters, analogous to the ones taken by the C functions.

EXAMPLES

       The  following  command will tell the process running with PID 12345 to enable the failure point posix/io/read with a 25% of probability to
       fail, and the failure point libc/mm/malloc with a 5% of probability to fail:

	      fiu-ctrl -c 'enable_random name=posix/io/*,probability=0.25' 
		       -c 'enable_random name=libc/mm/*,probability=0.05' 12345

       And the following will tell the same process to disable the previously enabled failure point posix/io/read:

	      fiu-ctrl -c 'disable name=posix/io/read' 12345

SEE ALSO

       libfiu(3), fiu-run(1).

BUGS

       If you want to report bugs, or have any questions or comments, just let me know at albertito@blitiri.com.ar.  For  more	information  about
       libfiu, you can go to http://blitiri.com.ar/p/libfiu.

								    16/Jun/2009 						       fiu-ctrl(1)