ESREVERSE:(1)							   User Commands						     ESREVERSE:(1)

NAME

       esreverse - reverse an es stream

SYNOPSIS

       esreverse [switches] <infile> <outfile>

DESCRIPTION

	      TS tools version 1.11, esreverse built Nov 11 2008 17:15:47

	      Output a reversed stream derived from the input H.264 (MPEG-4/AVC) or H.262 (MPEG-2) elementary stream.

	      If output is to an H.222 Transport Stream, then fixed values for the PMT PID (0x66) and video PID (0x68) are used.

   Files:
       <infile>
	      is the input elementary stream.

	      <outfile> is the output stream, either an equivalent elementary

	      stream, or an H.222 Transport Stream (but see -stdout and -host below).

   Switches:
       -verbose, -v
	      Output additional (debugging) messages

       -quiet, -q
	      Only output error messages

       -stdout
	      Write output to <stdout>, instead of a named file Forces -quiet.

       -host <host>, -host <host>:<port>
	      Writes  output (over TCP/IP) to the named <host>, instead of to a named file. If <port> is not specified, it defaults to 88. Implies
	      -tsout.

       -max <n>, -m <n>
	      Maximum number of frames to read

       -freq <n>
	      Specify the frequency of frames to try to keep when reversing. Defaults to 8.

       -tsout Output H.222 Transport Stream

       -pes, -ts
	      The input file is TS or PS, to be read via the PES->ES reading mechanisms

       -server
	      Also output as normal forward video as reversal data is being collected. Implies -pes and -tsout.

       -x     Temporary extra debugging information

   Stream type:
	      If input is from a file, then the program will look at the start of the file to determine if the stream is H.264 or H.262 data. This
	      process may occasionally come to the wrong conclusion, in which case the user can override the choice using the following switches.

       -h264, -avc
	      Force the program to treat the input as MPEG-4/AVC.

       -h262  Force the program to treat the input as MPEG-2.

	      TS tools version 1.11, esreverse built Nov 11 2008 17:15:47

	      Output a reversed stream derived from the input H.264 (MPEG-4/AVC) or H.262 (MPEG-2) elementary stream.

	      If output is to an H.222 Transport Stream, then fixed values for the PMT PID (0x66) and video PID (0x68) are used.

   Files:
       <infile>
	      is the input elementary stream.

	      <outfile> is the output stream, either an equivalent elementary

	      stream, or an H.222 Transport Stream (but see -stdout and -host below).

   Switches:
       -verbose, -v
	      Output additional (debugging) messages

       -quiet, -q
	      Only output error messages

       -stdout
	      Write output to <stdout>, instead of a named file Forces -quiet.

       -host <host>, -host <host>:<port>
	      Writes  output (over TCP/IP) to the named <host>, instead of to a named file. If <port> is not specified, it defaults to 88. Implies
	      -tsout.

       -max <n>, -m <n>
	      Maximum number of frames to read

       -freq <n>
	      Specify the frequency of frames to try to keep when reversing. Defaults to 8.

       -tsout Output H.222 Transport Stream

       -pes, -ts
	      The input file is TS or PS, to be read via the PES->ES reading mechanisms

       -server
	      Also output as normal forward video as reversal data is being collected. Implies -pes and -tsout.

       -x     Temporary extra debugging information

   Stream type:
	      If input is from a file, then the program will look at the start of the file to determine if the stream is H.264 or H.262 data. This
	      process may occasionally come to the wrong conclusion, in which case the user can override the choice using the following switches.

       -h264, -avc
	      Force the program to treat the input as MPEG-4/AVC.

       -h262  Force the program to treat the input as MPEG-2.

SEE ALSO

       The full documentation for esreverse is maintained as a Texinfo manual.	Please check http://tstools.berlios.de for more information.

esreverse 1.11							   November 2008						     ESREVERSE:(1)