Will some one tell me what this means.
"warning: ida 0 <slot 6> : command timed out on dev 1/42 blk 4824290 logical unit=0 blocks=5512102, size 2, cmd=0x20."
I'm running SCO 505 on a proliant 1600r.
Thnank you in advance. (3 Replies)
I am using an Acer Aspire 4720Z with two partitions C and D. Windows is installed on C and I decided to install Red Hat Linux 9 in partition D. The two partitions are in NTFS file system. During my installation of the the Linux, a prompt was displayed on screen with the message: "No hard drives... (2 Replies)
I have a Solaris machine running OpenSolaris v5.11.
It came with a hard drive. It's called /dev/dsk/c4d0s0.
I added two new hard drives into the box. I can't figure out what it's called in /dev/dsk. There are 210 filenames in /dev/dsk.
How do I find out which filename corresponds to the... (2 Replies)
Version: solaris 10 x86
I just got a western digital external harddrive formated with fat 32. this drive came with some setup files which is meant for windows or mac.
I want to reformat and partition this drive into two ( for solaris and windows) such that the setup files will still be there... (2 Replies)
Folks;
I just added 2 physical new hard drives to my SUSE server. My server is already running SUSE 10.3 version.
Is there a command i can use to add the new space or even see if the system can sees them? (3 Replies)
I have a T2000 Sun-Fire server. I have 2 sets of drives in a raid 1. Lets call them Set A and Set B. I had Set A installed and working. I needed a new install so I so build up Set B. After some time I wanted to put Set A back in the server. Now the system will not boot off of Set A. I tried to boot... (7 Replies)
Hello everyone. I have a question which I may know the answer to, I'm just looking for a confirmation. When it comes to the MBR of a hard drive, i've read in multiple sources that it's always located in the first sector of the hard drive. Is the MBR there from the factory? When I buy a new blank... (3 Replies)
I have three Sun Oracle Netra T5220s. I am trying to just get the processor information psrinfo or prtdiag -v from the # prompt in single user mode.
I am needing to know the commands to get to boot the CD/DVD of the Solaris OS. I am using it via Serial Port Management.
Tinkering around I... (4 Replies)
Hello,
I have install 2 HDD in my server and now installing the Centos6.4.
I want create the LVM of those 2 HDD's so while i'm doing this it is not allowing me to select these 2 disk's from allowable disk list.
Same problem if i tried to make Software RAID with creating LVM.
Please help. (1 Reply)
Hi,
I have two SCSI Hard Drives in a Sun Solaris 8 server as shown below. I would like to access Disk1 and look at its contents, directory structure and files. How do I change my default directory from Disk 0 to Disk 1 and vice versa?
Thank you. (5 Replies)
Discussion started by: ssabet
5 Replies
LEARN ABOUT LINUX
partx
PARTX(8) System Manager's Manual PARTX(8)NAME
partx - tell the Linux kernel about the presence and numbering of on-disk partitions
SYNOPSIS
partx [-a|-d|-s] [-t TYPE] [-n M:N] [-] disk
partx [-a|-d|-s] [-t TYPE] partition [disk]
DESCRIPTION
Given a device or disk-image, partx tries to parse the partition table and list its contents. It optionally adds or removes partitions.
The disk argument is optional when a partition argument is provided. To force scanning a partition as if it were a whole disk (for example
to list nested subpartitions), use the argument "-". For example:
partx --show - /dev/sda3
This will see sda3 as a whole-disk rather than a partition.
This is not an fdisk program -- adding and removing partitions does not change the disk, it just tells the kernel about the presence and
numbering of on-disk partitions.
OPTIONS -a, --add
Add the specified partitions, or read the disk and add all partitions.
-b, --bytes
Print the SIZE column in bytes rather than in human-readable format.
-d, --delete
Delete the specified partitions or all partitions.
-g, --noheadings
Do not print a header line.
-l, --list
List the partitions. Note that all numbers are in 512-byte sectors. This output format is DEPRECATED in favour of --show. Don't
use it in newly written scripts.
-o, --output list
Define the output columns to use for --show and --raw output. If no output arrangement is specified, then a default set is used.
Use --help to get list of all supported columns.
-r, --raw
Use the raw output format.
-s, --show
List the partitions. All numbers (except SIZE) are in 512-byte sectors. The output columns can be rearranged with the --output
option.
-t, --type type
Specify the partition table type -- aix, bsd, dos, gpt, mac, minix, sgi, solaris_x86, sun, ultrix or unixware.
-n, --nr M:N
Specify the range of partitions. For backward compatibility also the format <M-N> is supported. The range may contain negative
numbers, for example "--nr :-1" means the last partition, and "--nr -2:-1" means the last two partitions. Supported range specifi-
cations are:
<M> Specifies just one partition (e.g. --nr 3).
<M:> Specifies lower limit only (e.g. --nr 2:).
<:N> Specifies upper limit only (e.g. --nr :4).
<M:N> or <M-N> Specifies lower and upper limits (e.g. --nr 2:4).
EXAMPLES
partx --show /dev/sdb3
partx --show --nr 3 /dev/sdb
partx --show /dev/sdb3 /dev/sdb
All three commands list partition 3 of /dev/sdb.
partx --show - /dev/sdb3
Lists all subpartitions on /dev/sdb3 (the device is used as whole-disk).
partx -o START -g --nr 3 /dev/sdb
Prints the start sector of partition 5 on /dev/sda without header.
partx -o SECTORS,SIZE /dev/sda5 /dev/sda
Lists the length in sectors and human-readable size of partition 5 on /dev/sda.
partx --add --nr 3:5 /dev/sdd
Adds all available partitions from 3 to 5 (inclusive) on /dev/sdd.
partx -d --nr :-1 /dev/sdd
Removes the last partition on /dev/sdd.
SEE ALSO addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)AUTHORS
Davidlohr Bueso <dave@gnu.org>
Karel Zak <kzak@redhat.com>
The original version was written by Andries E. Brouwer <aeb@cwi.nl>.
AVAILABILITY
The partx command is part of the util-linux package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux/.
1 Feb 2011 PARTX(8)