Understanding volumes and hard drives Post: 303028294

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Hard drives

Will some one tell me what this means. "warning: ida 0 <slot 6> : command timed out on dev 1/42 blk 4824290 logical unit=0 blocks=5512102, size 2, cmd=0x20." I'm running SCO 505 on a proliant 1600r. Thnank you in advance.

2. Linux

No Hard Drives Have Been Found

I am using an Acer Aspire 4720Z with two partitions C and D. Windows is installed on C and I decided to install Red Hat Linux 9 in partition D. The two partitions are in NTFS file system. During my installation of the the Linux, a prompt was displayed on screen with the message: "No hard drives...

3. Solaris

How do I determine the hard drives in /dev/dsk in OpenSolaris?

I have a Solaris machine running OpenSolaris v5.11. It came with a hard drive. It's called /dev/dsk/c4d0s0. I added two new hard drives into the box. I can't figure out what it's called in /dev/dsk. There are 210 filenames in /dev/dsk. How do I find out which filename corresponds to the...

4. Solaris

formating and repartitioning an external hard drives

Version: solaris 10 x86 I just got a western digital external harddrive formated with fat 32. this drive came with some setup files which is meant for windows or mac. I want to reformat and partition this drive into two ( for solaris and windows) such that the setup files will still be there...

5. Filesystems, Disks and Memory

Help adding new hard drives

Folks; I just added 2 physical new hard drives to my SUSE server. My server is already running SUSE 10.3 version. Is there a command i can use to add the new space or even see if the system can sees them?

6. Solaris

Reinstall old hard drives

I have a T2000 Sun-Fire server. I have 2 sets of drives in a raid 1. Lets call them Set A and Set B. I had Set A installed and working. I needed a new install so I so build up Set B. After some time I wanted to put Set A back in the server. Now the system will not boot off of Set A. I tried to boot...

7. Hardware

Hard Drives and MBR

Hello everyone. I have a question which I may know the answer to, I'm just looking for a confirmation. When it comes to the MBR of a hard drive, i've read in multiple sources that it's always located in the first sector of the hard drive. Is the MBR there from the factory? When I buy a new blank...

8. Solaris

Trying to boot Solaris without hard drives in T5220

I have three Sun Oracle Netra T5220s. I am trying to just get the processor information psrinfo or prtdiag -v from the # prompt in single user mode. I am needing to know the commands to get to boot the CD/DVD of the Solaris OS. I am using it via Serial Port Management. Tinkering around I...

9. Linux

Create LVM of 2 Hard Drives while installing Centos 6.4.

Hello, I have install 2 HDD in my server and now installing the Centos6.4. I want create the LVM of those 2 HDD's so while i'm doing this it is not allowing me to select these 2 disk's from allowable disk list. Same problem if i tried to make Software RAID with creating LVM. Please help.

10. Solaris

Solaris 8 - Accessing Hard Drives

Hi, I have two SCSI Hard Drives in a Sun Solaris 8 server as shown below. I would like to access Disk1 and look at its contents, directory structure and files. How do I change my default directory from Disk 0 to Disk 1 and vice versa? Thank you.

LEARN ABOUT SUSE

platform::shell

platform::shell(n)					       Tcl Bundled Packages						platform::shell(n)

__________________________________________________________________________________________________________________________________________________

NAME

       platform::shell - System identification support code and utilities

SYNOPSIS

       package require platform::shell ?1.1.4?

       platform::shell::generic shell
       platform::shell::identify shell
       platform::shell::platform shell
_________________________________________________________________

DESCRIPTION

       The platform::shell package provides several utility commands useful for the identification of the architecture of a specific Tcl shell.

       This  package  allows the identification of the architecture of a specific Tcl shell different from the shell running the package. The only
       requirement is that the other shell (identified by its path), is actually executable on the current machine.

       While for most platform this means that the architecture of the interrogated shell is identical to the architecture of  the  running  shell
       this  is  not generally true. A counter example are all platforms which have 32 and 64 bit variants and where a 64bit system is able to run
       32bit code. For these running and interrogated shell may have different 32/64 bit settings and thus different identifiers.

       For applications like a code repository it is important to identify the architecture of the shell which will  actually  run  the  installed
       packages, versus the architecture of the shell running the repository software.

COMMANDS

       platform::shell::identify shell
	      This command does the same identification as platform::identify, for the specified Tcl shell, in contrast to the running shell.

       platform::shell::generic shell
	      This command does the same identification as platform::generic, for the specified Tcl shell, in contrast to the running shell.

       platform::shell::platform shell
	      This command returns the contents of tcl_platform(platform) for the specified Tcl shell.

KEYWORDS

       operating system, cpu architecture, platform, architecture

platform::shell 						       1.1.4							platform::shell(n)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Hard drives

Discussion started by: franruiz

2. Linux

No Hard Drives Have Been Found

Discussion started by: tamcomng

3. Solaris

How do I determine the hard drives in /dev/dsk in OpenSolaris?

Discussion started by: sqa777

4. Solaris

formating and repartitioning an external hard drives

Discussion started by: seyiisq