Sponsored Content
Operating Systems Linux Red Hat Advice on allocating SAN storage to a virtual database server on VMware Post 303027922 by gull04 on Friday 28th of December 2018 09:00:18 AM
Old 12-28-2018
Hi dkmartin,

From the way you describe the layout, I'm going to assume that you're running something like SVC for the management of the LUN's. Are the AIX environment LPAR's or are they standalone machines, or something else of course.

Managing LUN's accross six individual SAN devices is very costly in resource, along with the planning headache when it comes to new system builds - well inless you have plenty of disk. I currently have two devices - a 1.5Pb VMax and a 250Gb VNX and that provides enough confusion.

Where ver possible our approach is to go for a single LUN, but we do have quite a number of systems with large numbers of luns (some are in excess of 200) on AIX, Solaris and RHEL. We do have some very old versions on VMware, but they are slowly being decommissioned.

So in reality I would if time permits look at load and I/O on a system by system basis, where the results indicate there would be a benefit - replicate the existing model. If the results show it would be OK, go for the single LUN, if you're using Metro or Global mirror you may have to delve a bit deeper and look at inter system bandwidth.

Regards

Gull04
 

5 More Discussions You Might Find Interesting

1. Solaris

Using San storage - advice needed

Thinking of using our San for network backups.. Have a Netra 240 being installed and planning to get some space on our San. Do you know what software is used to access the San from my server or what I would need to do? I know how to connect to local storage, disk arrays etc but not sure what... (1 Reply)
Discussion started by: frustrated1
1 Replies

2. Solaris

SAN Storage to solaris 10 server

Hi, I have configured our SAN Storage to be connected to our new SUN T5220. On the SAn it looks all fine on the server I do not see any connection: cfgadm -al Ap_Id Type Receptacle Occupant Condition c1 scsi-bus connected ... (4 Replies)
Discussion started by: manni2
4 Replies

3. SuSE

Hot-add memory to SuSE / VMware virtual server

Hi, Here is the issue. Some more memory has been added from vCenter to the virtual machine. From the virtual machine running SuSE 11 SP3. # modprobe acpiphp # modprobe acpi-memhotplug # grep -v online /sys/devices/system/memory/*/state # It looks like there is no offline memory, but free... (1 Reply)
Discussion started by: aixlover
1 Replies

4. UNIX for Dummies Questions & Answers

Allocating Unallocated Drive Space from a SAN to a filesystem

Good Morning everyone, I want to know how to allocate unallocated drive space from a SAN to a file system that desperately needs the drive space. Does anyone have any documentation or tips on how to accomplish this? I am running on AIX version 6.1. (2 Replies)
Discussion started by: ryanco
2 Replies

5. Homework & Coursework Questions

How to mount a 79TB SAN storage to another server?

Hi Team, How do i mount or connect the SAN storage to a specific folder. I have tried to mount it but each time i can only mount 900GB of the storage to the folder: ipmi1 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-root_vol ... (0 Replies)
Discussion started by: ElVista
0 Replies
VMWARE(4)						     Kernel Interfaces Manual							 VMWARE(4)

NAME
vmware - VMware SVGA video driver SYNOPSIS
Section "Device" Identifier "devname" Driver "vmware" ... EndSection DESCRIPTION
vmware is an XFree86 driver for VMware virtual video cards. CONFIGURATION DETAILS
Please refer to XF86Config(5) for general configuration details. This section only covers configuration details specific to this driver. The driver auto-detects the version of any virtual VMware SVGA adapter. The following driver Options are supported: Option "HWCursor" "boolean" Enable or disable the HW cursor. Default: off. Option "NoAccel" "boolean" Disable or enable acceleration. Default: acceleration is enabled. SEE ALSO
XFree86(1), XF86Config(5), xf86config(1), Xserver(1), X(7) AUTHORS
Copyright (c) 1999-2001 VMware, Inc. XFree86 Version 4.7.0 VMWARE(4)
All times are GMT -4. The time now is 09:41 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy