ifconfig for both machines is exactly the same other than of course the ip change. Here is one of the two
I guess my first question is when is an interface of type VLAN created for a LPAR; 'ent1' in my case? Since en1 and ent1 is missing on the new lpar I'm just trying to figure out what it means and when it gets created.
Just to be clear both LPARs have same virtual adapter configurations and hence I was expecting the same number of interfaces being visible in lsdev output.
Hi,
I define 2 new LV on the vio server and run a cfgmgr on the partition and see my 2 new hdisk (hdisk6 and hdisk7).
I extend my vg vg000 (on the partition) and add the 2 hdisks.
I had a filesystem on the vg000 and when I added the disk I would like to increase the filesystem. But I cannot do a... (0 Replies)
Hello all,
I want to add a new virtual interface on HP-UX B.11.11 U 9000/800 box.
I know that ifconfig can be used to add the Virtual interface.
BUt i do not know the exact syntax. it some times gives plumb error if i try to add
# ifconfig vif0 10.1.10.1 up
plumb error: No such file... (3 Replies)
Hello all,
I have configured a virtual interface using ifconfig on HP UX 11.11.
When i try to do traceroute with -i option i get * * * from traceroute.
i use $traceroute -i lan0:1 my-gateway
traceroute to my-gateway (15.70.180.1), 30 hops max, 40 byte packets
1 * * *
2 * * *
30 * *... (2 Replies)
How would i create virtual interface in linux to configure more than one IP address for a physical interface?
any help wll be appreciated.
https://www.unix.com/images/misc/progress.gif (1 Reply)
I just wondering if there are ways to open multiple virtual terminal to a single LPAR.
After I have use putty to login to the VIOS. I will use mkvt -id <LPAR id> to open console but if my friend want to open 2 second one, it will say, VT already connected.
IS there a way to work this around ? ... (1 Reply)
Hello, hopefully someone can help me out with this, I have created a virtual Ethernet adapter on the VIO but would like to add it to my new LPAR.
On my VIO only my disk is mapped.
$ lsmap -all
SVSA Physloc Client Partition ID
--------------- --------------------------------------------... (5 Replies)
Hi,
When i'am taking nmon report I am missing the LPAR tab that shows CPU and Shared CPU utilization.
My OS version is 6100-06-05-1115
Topas_nmon
Kindly suggest and help me to sort out this issue. (3 Replies)
Hello,
VIOS 2.2.1.4 using IVM.
I'm trying to extend a virtual disk assigned to a running lpar so that I can expand the lpar's datavg and grow some filesystems for the user.
Storage admin expanded the lun and new size was reflected in VIO right away. I then needed the storage pool to... (2 Replies)
Hello,
Is there a way to run
xclock
or
startx
on LPAR, since LPAR doesn't have any console or it is connected to HMC
usually the way is to export the display to some PC which has Xmanager running on it, but in my case, I want to run xmanager on the AIX Lpar and run on it the... (2 Replies)
Discussion started by: filosophizer
2 Replies
LEARN ABOUT FREEBSD
edsc
EDSC(4) BSD Kernel Interfaces Manual EDSC(4)NAME
edsc -- Ethernet discard network interface
SYNOPSIS
device edsc
DESCRIPTION
The edsc interface is a software discard mechanism which may be used for performance analysis and software testing. It imitates an Ethernet
device, which allows for its use in conjunction with such drivers as if_bridge(4) and vlan(4).
As with other network interfaces, an edsc interface must have network addresses assigned for each address family with which it is to be used.
These addresses may be set or changed with the SIOCSIFADDR ioctl(2) or ifconfig(8) utility.
Each edsc interface is created at runtime using interface cloning. This is most easily done with the ifconfig(8) create command or using the
cloned_interfaces variable in rc.conf(5).
SEE ALSO ioctl(2), arp(4), if_bridge(4), inet(4), intro(4), vlan(4), rc.conf(5), arp(8), ifconfig(8)HISTORY
The edsc device was derived from the disc(4) device and first appeared in FreeBSD 6.3. This manpage was adapted from disc(4).
CAVEATS
Since outgoing packets are just discarded by edsc, ARP requests stay unreplied. Consequently, an IP packet cannot be sent via edsc until a
static arp(4) entry is created for its next hop using arp(8).
Initially an edsc interface has a zero link level address. It can be changed with ifconfig(8) lladdr if needed.
BSD March 25, 2007 BSD