I guess my first question is when is an interface of type VLAN created for a LPAR; 'ent1' in my case? Since en1 and ent1 is missing on the new lpar I'm just trying to figure out what it means and when it gets created.
Just to be clear both LPARs have same virtual adapter configurations and hence I was expecting the same number of interfaces being visible in lsdev output.
Code:
bash-4.4# lsdev | grep ^en
en0 Defined Standard Ethernet Network Interface
en1 Available Standard Ethernet Network Interface
ent0 Available Virtual I/O Ethernet Adapter (l-lan)
ent1 Available VLAN
Code:
bash-4.4# lsdev -C -H -S a -F 'name class subclass type'
name class subclass type
en1 if EN en
ent1 adapter vlan eth
<--more rows truncated -->
Hi,
I define 2 new LV on the vio server and run a cfgmgr on the partition and see my 2 new hdisk (hdisk6 and hdisk7).
I extend my vg vg000 (on the partition) and add the 2 hdisks.
I had a filesystem on the vg000 and when I added the disk I would like to increase the filesystem. But I cannot do a... (0 Replies)
Hello all,
I want to add a new virtual interface on HP-UX B.11.11 U 9000/800 box.
I know that ifconfig can be used to add the Virtual interface.
BUt i do not know the exact syntax. it some times gives plumb error if i try to add
# ifconfig vif0 10.1.10.1 up
plumb error: No such file... (3 Replies)
Hello all,
I have configured a virtual interface using ifconfig on HP UX 11.11.
When i try to do traceroute with -i option i get * * * from traceroute.
i use $traceroute -i lan0:1 my-gateway
traceroute to my-gateway (15.70.180.1), 30 hops max, 40 byte packets
1 * * *
2 * * *
30 * *... (2 Replies)
How would i create virtual interface in linux to configure more than one IP address for a physical interface?
any help wll be appreciated.
https://www.unix.com/images/misc/progress.gif (1 Reply)
I just wondering if there are ways to open multiple virtual terminal to a single LPAR.
After I have use putty to login to the VIOS. I will use mkvt -id <LPAR id> to open console but if my friend want to open 2 second one, it will say, VT already connected.
IS there a way to work this around ? ... (1 Reply)
Hello, hopefully someone can help me out with this, I have created a virtual Ethernet adapter on the VIO but would like to add it to my new LPAR.
On my VIO only my disk is mapped.
$ lsmap -all
SVSA Physloc Client Partition ID
--------------- --------------------------------------------... (5 Replies)
Hi,
When i'am taking nmon report I am missing the LPAR tab that shows CPU and Shared CPU utilization.
My OS version is 6100-06-05-1115
Topas_nmon
Kindly suggest and help me to sort out this issue. (3 Replies)
Hello,
VIOS 2.2.1.4 using IVM.
I'm trying to extend a virtual disk assigned to a running lpar so that I can expand the lpar's datavg and grow some filesystems for the user.
Storage admin expanded the lun and new size was reflected in VIO right away. I then needed the storage pool to... (2 Replies)
Hello,
Is there a way to run
xclock
or
startx
on LPAR, since LPAR doesn't have any console or it is connected to HMC
usually the way is to export the display to some PC which has Xmanager running on it, but in my case, I want to run xmanager on the AIX Lpar and run on it the... (2 Replies)
Discussion started by: filosophizer
2 Replies
LEARN ABOUT SUSE
lsdev
LSDEV(8) Linux System Manual LSDEV(8)NAME
lsdev - display information about installed hardware
SYNOPSIS
lsdev
DESCRIPTION
lsdev gathers information about your computer's installed hardware from the interrupts, ioports and dma files in the /proc directory, thus
giving you a quick overview of which hardware uses what I/O addresses and what IRQ and DMA channels.
OPTIONS
None.
FILES
/proc/interrupts
IRQ channels.
/proc/ioports
I/O memory addresses.
/proc/dma
DMA channels.
BUGS
lsdev can't always figure out which lines in the three examined files refer to one and the same device, because these files sometimes use
different names for the same piece of hardware. For example, in some kernels the keyboard is referred to as `kbd' in /proc/ioports and as
`keyboard' in /proc/interrupts. This should be fixed in the kernel, not in lsdev (as has indeed happened for this particular example).
The program does however try to match lines by stripping anything after a space or open parenthesis from the name, so that e.g. the
`serial' lines from /proc/interrupts match the `serial(set)' lines from /proc/ioports. This attempt at DWIM might be considered a bug in
itself.
This program only shows the kernel's idea of what hardware is present, not what's actually physically available.
SEE ALSO procinfo(8).
AUTHOR
Sander van Malssen <svm@kozmix.cistron.nl>
3rd Release 1998-05-31 LSDEV(8)