12-03-2018
Hi Vext01,
As you've had the machine in bits and have replaced the guts, I'm going to stick my neck out and suggest that the connections should be good as they should all have been re-seated during component changes. I'd maybe tempted to swap the PSU if you have one, but the maintenance indicator would generally be on if it was faulty.
It might be that just pulling and re-seating the power supply would be enough.
I'm kind of running out of steam on this, you've changed the MOBO and the CPU's. The fault has remained pretty consistent, from the environmentals it doesn't seem to be power related. I'ts unlikely that this will make any difference, but can you capture the ALOM config and then run a sc> resetsc you'll have to go through the setting up the ALOM again (Although you should just need to change the password as the rest should work).
Additionally something has just come to the fore, didn't happen to me - it was an engineer that I worked with. He had a fault on a v210 or it may have been a v240 - where he replaced the Mother Board and couldn't get to the ok prompt.
Turned out that he'd mixed the matched pairs of memory and that causes the OBP not to start, it didn't supply an error message either - I've been in touch with him and although the Dimm's were the same speed - they had different manufacturers and that was enough.
Regards
Gull04
Last edited by gull04; 12-03-2018 at 09:29 AM..
Reason: More Info
7 More Discussions You Might Find Interesting
1. Solaris
hi all, how can install a display card on a sun fire v210.
regards. marcel (2 Replies)
Discussion started by: marcelious
2 Replies
2. Solaris
I recently acquired a server for home use. Currently, I'm running a V210. I was wondering of a way to basically swap hard drives into the V440.
I would like to avoid reinstall on the V440 for many reasons.
Currently on the V440, when I try to boot up it forces itself into System Maintenance... (1 Reply)
Discussion started by: adelsin
1 Replies
3. Solaris
I'm currently trying to move a perfectly find harddrive from a V210 to a V440. From what I can tell, the disk labeling a bit different, (V210 is c1t0d0 and V440 is c0t0d0). My question is, what all do I have to change to get the V440 to boot off of this with very little complications. Right now, it... (21 Replies)
Discussion started by: adelsin
21 Replies
4. Solaris
Sun Fire V210, No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.13.2, 4096 MB memory installed, Serial #61203679.
Ethernet address 0:3:ba:a5:e4:df, Host ID: 83a5e4df.
Boot device: net File and args:
100 Mbps FDX Link up
Timeout waiting for... (5 Replies)
Discussion started by: Mrudhul
5 Replies
5. Solaris
I have bought from eBay a second hand Sun Fire V210 server and I'm really stumped at the lack of complete instructions on how to connect to it.
I don't have a Windows machine, I've only got Ubuntu and OS X computers. None of them have an old RS-232 port on them either.
In saying that, I have... (12 Replies)
Discussion started by: danijeljames
12 Replies
6. UNIX for Dummies Questions & Answers
Purchased a Sun Surefire V210 Server off eBay. Unable to Access the Terminal Mode via the Terminal MGT. Using Windows 7 home, and downloaded the ConEmu.
The ConEmu brings up a Command line on the PC, and that's it.
Being new to all this, I was expecting a Login prompt to pop up. Read the... (22 Replies)
Discussion started by: screenprintr
22 Replies
7. Solaris
Hey,
I have a V210 with a failed CPU fan.
The temperature is currently at 84C and I've been asked to wait a few weeks before replacing as its a production system and it cant be shut down yet.
Is it too hot? Do I risk killing the CPU at this temp?
Its been like this for a few weeks now... (5 Replies)
Discussion started by: magarvo
5 Replies
LEARN ABOUT LINUX
curl_getdate
curl_getdate(3) libcurl Manual curl_getdate(3)
NAME
curl_getdate - Convert a date string to number of seconds since January 1, 1970
SYNOPSIS
#include <curl/curl.h>
time_t curl_getdate(char *datestring, time_t *now );
DESCRIPTION
This function returns the number of seconds since January 1st 1970 in the UTC time zone, for the date and time that the datestring parame-
ter specifies. The now parameter is not used, pass a NULL there.
NOTE: This function was rewritten for the 7.12.2 release and this documentation covers the functionality of the new one. The new one is not
feature-complete with the old one, but most of the formats supported by the new one was supported by the old too.
PARSING DATES AND TIMES
A "date" is a string containing several items separated by whitespace. The order of the items is immaterial. A date string may contain
many flavors of items:
calendar date items
Can be specified several ways. Month names can only be three-letter english abbreviations, numbers can be zero-prefixed and the
year may use 2 or 4 digits. Examples: 06 Nov 1994, 06-Nov-94 and Nov-94 6.
time of the day items
This string specifies the time on a given day. You must specify it with 6 digits with two colons: HH:MM:SS. To not include the time
in a date string, will make the function assume 00:00:00. Example: 18:19:21.
time zone items
Specifies international time zone. There are a few acronyms supported, but in general you should instead use the specific relative
time compared to UTC. Supported formats include: -1200, MST, +0100.
day of the week items
Specifies a day of the week. Days of the week may be spelled out in full (using english): `Sunday', `Monday', etc or they may be
abbreviated to their first three letters. This is usually not info that adds anything.
pure numbers
If a decimal number of the form YYYYMMDD appears, then YYYY is read as the year, MM as the month number and DD as the day of the
month, for the specified calendar date.
EXAMPLES
Sun, 06 Nov 1994 08:49:37 GMT
Sunday, 06-Nov-94 08:49:37 GMT
Sun Nov 6 08:49:37 1994
06 Nov 1994 08:49:37 GMT
06-Nov-94 08:49:37 GMT
Nov 6 08:49:37 1994
06 Nov 1994 08:49:37
06-Nov-94 08:49:37
1994 Nov 6 08:49:37
GMT 08:49:37 06-Nov-94 Sunday
94 6 Nov 08:49:37
1994 Nov 6
06-Nov-94
Sun Nov 6 94
1994.Nov.6
Sun/Nov/6/94/GMT
Sun, 06 Nov 1994 08:49:37 CET
06 Nov 1994 08:49:37 EST
Sun, 12 Sep 2004 15:05:58 -0700
Sat, 11 Sep 2004 21:32:11 +0200
20040912 15:05:58 -0700
20040911 +0200
STANDARDS
This parser was written to handle date formats specified in RFC 822 (including the update in RFC 1123) using time zone name or time zone
delta and RFC 850 (obsoleted by RFC 1036) and ANSI C's asctime() format. These formats are the only ones RFC2616 says HTTP applications may
use.
RETURN VALUE
This function returns -1 when it fails to parse the date string. Otherwise it returns the number of seconds as described.
If the year is larger than 2037 on systems with 32 bit time_t, this function will return 0x7fffffff (since that is the largest possible
signed 32 bit number).
Having a 64 bit time_t is not a guarantee that dates beyond 03:14:07 UTC, January 19, 2038 will work fine. On systems with a 64 bit time_t
but with a crippled mktime(), curl_getdate will return -1 in this case.
REWRITE
The former version of this function was built with yacc and was not only very large, it was also never quite understood and it wasn't pos-
sible to build with non-GNU tools since only GNU Bison could make it thread-safe!
The rewrite was done for 7.12.2. The new one is much smaller and uses simpler code.
libcurl 7.0 12 Aug 2005 curl_getdate(3)