11-28-2018
I wouldn't bother trying to find another Xeon mb. the vast majority of socket 478 and 775 systems will run SCO. as long as any SATA controller can be set to legacy IDE mode you should be fine. Use an add in network card, and preferably a PS2 keyboard.
I believe though that your current issue is with the installation of rs506, caused by a corrupted file in the /etc/conf directories; not corrupted enough to cause the kernel re-link to fail, but enough to prevent the new kernel from booting. Also if you have re-linked the kernel more than once then unix.old no longer represents the system state as it was just before rs506 was installed. ie every time you re-link the kernel, unix is moved to unix.old.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I've just installed Unix SCO OpenServer System v in an Intel PC and Everithing ok, except just one thing, in the begining of the installation the wizard asked me about the mouse , i have a generic 3 buttons mouse and i took a logitech and did not work
i need to change the mouse configuration, ... (2 Replies)
Discussion started by: jimmyvaldes
2 Replies
2. UNIX for Dummies Questions & Answers
hello!
when i try to make my system dual boot with both win98 & sco open server 5.5 it doesn't work at all.neither win98 take start nor sco open server boots.what should i do ?
kindly help me
thanks (1 Reply)
Discussion started by: buntty
1 Replies
3. UNIX for Advanced & Expert Users
I am doing some work for a customer that is running SCO 5.0.2 openserver and they have lost their cd. Is there anyplace I can download it? I have a replacement being shipped but it will not be here for two days and they are down. Any ideals? (3 Replies)
Discussion started by: SCOoT
3 Replies
4. UNIX for Dummies Questions & Answers
hello guys.
I just installed SCO 5.0.6 OpenServer it went all the way to the end of the installation and the first boot try it gave me this message.
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot (2 Replies)
Discussion started by: josramon
2 Replies
5. SCO
Which version of Ethereal can I use for SCO OpenServer 5.0.7??? (0 Replies)
Discussion started by: bean2
0 Replies
6. UNIX for Dummies Questions & Answers
Hi there guys.
I just got this new SCO version and i'm having some problem printing from shell,
This is what i'm typing at the # sign : lp -dHP /etc/hosts and it prints no problem but when i use any other user at the $ sign it gives me this error.
/dev/fd/7: /usr/lib/lp/sysv/7: not found.
... (1 Reply)
Discussion started by: josramon
1 Replies
7. UNIX for Dummies Questions & Answers
Hi guys,
I just got this new 6.0 version and i'm trying to setup a remote office to telnet to this server running sco 6.0, in previous version all i have to do is add this file under /etc/rc2.d call S99route and put the gate in that file and that was it, for some reason in 6.0 it does not... (1 Reply)
Discussion started by: josramon
1 Replies
8. SCO
Dear members
when i installed dual processor patch in openserver 5.0.7 in hp ML370 G4 server it hangs in sco at G_hd_config.
i tried MP4, EFS 5.64,5.70A but not solved the problem.. (0 Replies)
Discussion started by: M_farooqui
0 Replies
9. SCO
Hi,
I have an openserver 5.0.0 machine in the office. The sysad of that machine left years ago without leaving the password to anyone.
I was wondering if someone has a copy of the boot / root diskettes (rescue) for this version? Or perhaps if anyone knows a download link / location in the... (0 Replies)
Discussion started by: marcpascual
0 Replies
10. SCO
I need SCO Openserver 4.2. Please, give me distributive of that version SCO:eek: (0 Replies)
Discussion started by: caine
0 Replies
TWS(4) BSD Kernel Interfaces Manual TWS(4)
NAME
tws -- 3ware 9750 SATA+SAS 6Gb/s RAID controller card driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device scbus
device tws
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
tws_load="YES"
DESCRIPTION
The tws driver provides support for LSI's 3ware 9750 SATA+SAS 6Gb/s RAID controller cards.
These controllers feature the LSISAS2108 6Gb/s SAS RAID-on-Chip (ROC) and are available in 4- and 8-port configurations, supports RAID levels
0, 1, 5, 6, 10, 50 and single disk, with 96 SATA and/or SAS hard drives and SSDs.
For further hardware information, see http://www.lsi.com/.
HARDWARE
The tws driver supports the following SATA/SAS RAID controller:
o LSI's 3ware SAS 9750 series
LOADER TUNABLES
Tunables can be set at the loader(8) prompt before booting the kernel or stored in loader.conf(5).
hw.tws.cam_depth The maximum queued CAM SIM requests for one controller. The default value is 256.
hw.tws.enable_msi This tunable enables MSI support on the controller if set to a non-zero value. The default value is 0.
hw.tws.queue_depth The maximum queued requests for one controller.
hw.tws.use_32bit_sgls Limit the driver to use only 32-bit SG elements regardless whether the operating system is running in 64-bit mode.
The default value is 0.
FILES
/dev/da? array/logical disk interface
/dev/tws? management interface
DIAGNOSTICS
Whenever the driver encounters a command failure, it prints out an error code in the format: "ERROR: (<error source>: <error code>):", fol-
lowed by a text description of the error. There are other error messages and warnings that the driver prints out, depending on the kinds of
errors that it encounters. If the driver is compiled with TWS_DEBUG defined, it prints out a whole bunch of debug messages.
SEE ALSO
da(4), scsi(4)
AUTHORS
The tws driver was written by Manjunath Ranganathaiah for LSI and this manual page was written by Xin LI <delphij@FreeBSD.org> for iXsystems,
Inc.
BSD
October 4, 2011 BSD