Clock Stable w/ New Battery, "Break" command & USB Port Not Working.
Dear Hicksd8,
OK, new battery is keeping the system clock stable. Thanks for the heads up Hicks! Here is the latest SC action to celebrate:
Code:
ALOM BOOTMON v1.5.4
ALOM Build Release: 008
Reset register: e0000000 EHRS ESRS LLRS
ALOM POST 1.0
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Memory Parity Test
Memory Parity Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
SC Alert: CRITICAL ALARM is set
SC Alert: SC System booted.
Sun(tm) Advanced Lights Out Manager 1.5.4 ()
Full VxDiag Tests
BASIC TOD TEST
Read the TOD Clock: WED NOV 28 13:58:57 2018
Wait, 1 - 3 seconds
Read the TOD Clock: WED NOV 28 13:58:59 2018
BASIC TOD TEST, PASSED
ETHERNET CPU LOOPBACK TEST
50 BYTE PACKET - a 0 in field of 1's.
50 BYTE PACKET - a 1 in field of 0's.
900 BYTE PACKET - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED
Full VxDiag Tests - PASSED
Status summary - Status = 7FFF
VxDiag - - PASSED
POST - - PASSED
LOOPBACK - - PASSED
I2C - - PASSED
EPROM - - PASSED
FRU PROM - - PASSED
ETHERNET - - PASSED
MAIN CRC - - PASSED
BOOT CRC - - PASSED
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC850 - - PASSED
Please login: admin
Please Enter password: *********
sc> showdate
WED NOV 28 13:59:23 UTC 2018
sc> showdate
WED NOV 28 13:59:40 UTC 2018
sc> showdate
WED NOV 28 13:59:45 UTC 2018
sc> showdate
WED NOV 28 13:59:46 UTC 2018
sc> showdate
WED NOV 28 13:59:47 UTC 2018
sc>
sc> poweron
sc> break
Break command is disabled when system is powered off.
sc> poweroff
Host system power is already off
sc> poweron
sc> poweron
sc> poweron
sc> break
Break command is disabled when system is powered off.
sc> poweroff
Host system power is already off
There was some headache from mushy tiny battery positive terminals. To get the little new battery going, I had to slide in some wires under them and press them down with a tiny piece of electrical tape. I could be useful for somebody else in these situations, so I took pictures with my phone. Wire thickness must be right, and no aluminium foil did not work, in my case at least.
However "poweron"-"poweroff" problem is the same. Still thinks systems is not powered and break command does not work. DVR-ROM Still does not power up or respond to front keypress. I tried the USB ports with a brand new Sandisk memory stick, tested on 2 machines. Both plugging during operation and plugging before power up did not make it show on FRU list with "showfru" command.
Which brings us to motherboard jumper situation. Below are the info available in the manual about Netra240 motherboard jumpers:
Code:
JP1[1]
-------------
1-2 Fitted
3-4 Fitted
5-6 Not fitted
7-8 Not fitted
9-10 Fitted
Processor core voltage. Do not alter this jumper setting. Changing the setting for JP1 could cause damage to the server.
JP2
-------------
1-2 Not fitted
ALOM Flash ROM swap halves. Only service personnel should modify this setting. Fitting a jumper affects the swap.
JP3
-------------
1-2 Not fitted
ALOM reset. Used only for testing the system.
JP4
-------------
1-2 Fitted
3-4 Fitted
5-6 Not fitted
7-8 Not fitted
9-10 Not fitted
System configuration. Do not alter this jumper setting.
JP5
-------------
1-2 Not fitted
Only service personnel should modify this setting. Do not change the settings for the JP5 jumper. Only service personnel should modify the settings for this jumper.
JP6
-------------
1-2 Fitted (this is a non-functional setting)
2-3 Not fitted
ROMBO enable. Only service personnel should modify this setting. Fit jumper to 2-3 to enable ROMBO.
JP8
-------------
1-2 Fitted
Clear CMOS. Only service personnel should modify this setting. Fit jumper to 2-3 to clear CMOS.
JP10
-------------
1-2 Not fitted
Override PSON#. Only service personnel should modify this setting.
JP11
-------------
1-2 Not fitted
ROM write-protect. Only service personnel should modify this setting.
JP12
-------------
1-2 Not fitted
ALOM console bypass. Only service personnel should modify this setting.
JP13
-------------
1-2 Fitted (this is a non-functional setting)
2-3 Not fitted
OpenBoot PROM Flash ROM swap halves. Only service personnel should modify this setting. Fit jumper to 2-3 to affect swap.
JP14
-------------
1-2 Not fitted
ALOM AFT mode. Used for testing the system only.
Here is an overall picture of the board with current jumper positions:
I will follow with an ordered picture gallery of jumpers taking care to show jumper number and whether they are set or not.
we hv a big enviroment networked.
we use squid proxy.
access allowed by src address previously.
we have win2000 network with ads.
my requirement is the proxy should allow domain users only for access.
how can i map my windows userdatabase with squid
is there any thing specific which has 2 b... (1 Reply)
Hi, I'm a newbie.
I need help on my first assignment in UNIX.
1. How do I determine the number of non-empty directories?
I was told to create a variable ARCHIVE, which points to the directory that contains the archive of the messages. But I'm so dumb and I don't even know how to do this.
2. In... (1 Reply)
Hi every one
I have got very very bad Email, My question is:
How can I get all information about that f*** Email, I do mean
IP,reall name, Adress, user name, password etc... I wonder if there is any program or website that I can see that email, help me please
When I used windows Xp(old... (2 Replies)
I have a list of variables: ss1, ss5, ss6, ss8, st2 etc. (these values are not fixed, configurable). Now, I have assigned ss5=”test”. And I want to search in the list for the string “test” to know which variable is having the value “test”. Can u pls tell me how to do this? (10 Replies)
Hi,
I need your help guys. I have two data files, namely 101.amberized.pdb & 101.pdb .
Now I want to replace the whole 3rd column of 101.amberized.pdb with the 3rd column of 101.pdb file. How do I do it in shell?
Thanks in advance
Parimal (11 Replies)
When i run this command, everything is ok. The file can be email and attached but soon after i download the file, the file cant be read. It's seem corrupted. Totally cant be read although i'm using context or wordfile. Original file generated at ek_bkup/alert/tbspace_datafile.log is OK.....
... (7 Replies)
I have this code:
#!/bin/sh
awk 'BEGIN
NR == 2
repl = "PHI"
$4 = repl
print $0 'dryloop.txt
and this code:
#!/bin/sh
sed -e '1s/\|$/\|COMID\|/g' -e 's/^087.*$/&PHI\|g' hl.dsldryloop > textdry.txt
My code won't work. I want to change the COMID of lines starting with 087 .
this is my... (15 Replies)
Greetings,
I hope my post finds you all OK,
I have a Netra240 server in an HLR inside a wireless CDMA Exchange, it works as a Hard Disk Unit (HDU) as shown in Local Management Terminal (LMT) as show in the picture 1 attached.
The power went down because of a power failure in main UPS, when... (2 Replies)