Revive RAID 0 Array From Buffalo Duo NAS Post: 303026465

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Percent complete error while scanning RAID array during 5.0.6 load

Percent complete SCO 5.0.6 / No longer an issue

2. AIX

RAID level of array = false?

I created a RAID 5 array and when I list out the attributes of the "hdisk" it reports back raid_level = 5 but the RAID level of the array = false. What does this actually indicate about my array? I've never paid much attention to this until now since I have a disk reporting failure I want to make...

3. UNIX for Advanced & Expert Users

Create RAID - Smart Array Tool - ML370

Hi guys, i must install an old old old ml370 server... I must create a RAID 5 with my 4 SCSI disk. I need a SmartStart disk for create it or a Floppy Disk called "Array configuration Tool". I don't find it on the hp website...:mad::mad::mad: Anyone have it?? Thanks in advance. Zio

4. Solaris

EFI Disk labels on 3510 raid array

Hi Peeps, Can anyone help me an EFI lablel on a 3510 raid array that I cannot get rid of, format -e and label just asks you if you want to label it. Want an SMI label writing to it. Anyone got any ideas on how to remove the EFI label? Thanks in advance Martin

5. Emergency UNIX and Linux Support

Loading a RAID array after OS crash

One of my very old drive farm servers had an OS fault and can't boot now but I'd like to restore some files from it. I tried booting Ubuntu from a CD, but it couldn't see the drives -- possibly because they're RAIDed together. Is there a good way to get at my files? The data in question is a...

6. Red Hat

missing raid array after reboot

Dear all , i ve configured raid 0 in redhat machine(VM ware), by following steps: #mdadm -C /dev/md0 -l 0 -n 2 /dev/sdb1 /dev/sdc1 #mkfs.ext3 /dev/md0 #mdadm --detail --scan --config=mdadm.conf >/etc/mdadm.conf then mounted the/dev/md0 device and also added a entry in fstab. how...

7. Debian

Best RAID settings for Debian Server? Help!! (1+0 or 5 or NAS)

I am installing a Debian Server on a: HP Proliant DL380 G4 Dual CPU's 3.20 ghz / 800 mhz / 1MB L2 5120 MB RAM 6 hard disks on HP Smart Array 6i controller (36.4 GB Ultra320 SCSI HD each) I will be using this server to capture VHS video, encode, compress, cut, edit, make DVD's, rip...

8. What is on Your Mind?

Revive Ad Server MySQL Injection Attack

No rest for the weary, a Revive Ad Server I am responsible for experienced a MySQL injection attack due to a vulnerability uncovered in the past few months. I was busy developing Vue.js code for the forums and thought to myself "I will get around to upgrading to Revive 4.2.0 (supposedly the...

LEARN ABOUT HPUX

vxdestroy_lvmroot

vxdestroy_lvmroot(1M)													     vxdestroy_lvmroot(1M)

NAME

       vxdestroy_lvmroot - remove LVM root disk and associated LVM volume group

SYNOPSIS

       vxdestroy_lvmroot [-v] [-b] lvm_root_disk

DESCRIPTION

       The  vxdestroy_lvmroot  command	tears  down  and removes the LVM volume group associated with the specified physical disk. This is done by
       removing the volumes in the volume group and then removing the volume group.

OPTIONS

       -b	 Invokes the setboot command to change the primary boot disk to the VxVM root disk from which the system was booted (if  the  pri-
		 mary  boot  disk is not already set to this disk).  The alternate boot device remains unchanged.  If the -v option is also speci-
		 fied, the settings of the primary and alternate boot devices are displayed.

       -v	 Outputs verbose messages including a timestamp that indicates major operations being performed.

ARGUMENTS

       lvm_root_disk
	    Specifies the device name of the LVM root disk that is to be destroyed, along with its entire volume group.

EXAMPLES

       This example shows the vxdestroy_lvmroot command invoked in its simpliest form:

       /etc/vx/bin/vxdestroy_lvmroot c5t1d0

       # /etc/vx/bin/vxdestroy_lvmroot -v -b c3t0d0
       Are you sure about destroying c3t0d0 (imported on VG /dev/vg02) ? YES
       vxdestroy_lvmroot 06:02: Tearing down /dev/vg02 on device c3t0d0
       vxdestroy_lvmroot 06:02:
	 Unmounting and removing any volumes associated with /dev/vg02
       vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol1
       vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol2
       vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol3
       vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol4
       vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol5
       vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol6
       vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol7
       vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol8
       vxdestroy_lvmroot 06:02: Removing Volume Group /dev/vg02
       vxdestroy_lvmroot 06:02: Removing device files in /dev/vg02
       vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c3t0d0
       vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d3
       vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d4
       vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d5
       vxdestroy_lvmroot 06:03: Current setboot values:
       vxdestroy_lvmroot 06:03: Primary:       0/0/6/0/0.0.0
       vxdestroy_lvmroot 06:03: Alternate:     0/0/1/0/0.1.0
       vxdestroy_lvmroot 06:03:
	 Making disk c0t1d0 (0/0/1/0/0.1.0) the primary boot disk
       vxdestroy_lvmroot 06:03:
	 Removal of device c3t0d0, volume group /dev/vg02 was successful

SEE ALSO

       cpio(1), dd(1), fsck(1M), setboot(1M) vxbootsetup(1M) vxcp_lvmroot(1M) vxres_lvmroot(1M)

VxVM 5.0.31.1							    24 Mar 2008 					     vxdestroy_lvmroot(1M)