11-28-2018
@gull04........I've never come across a RAID controller that can RAID0 a couple of partitions on different disks and, at the same time, mirror (RAID1) other partitions on the same disks. I assume that the RAID0 we're seeing here is as a result of the previous attempt at recreating a RAID0 array.
8 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Percent complete SCO 5.0.6 / No longer an issue (0 Replies)
Discussion started by: Henrys
0 Replies
2. AIX
I created a RAID 5 array and when I list out the attributes of the "hdisk" it reports back raid_level = 5 but the RAID level of the array = false. What does this actually indicate about my array? I've never paid much attention to this until now since I have a disk reporting failure I want to make... (0 Replies)
Discussion started by: scottsl
0 Replies
3. UNIX for Advanced & Expert Users
Hi guys,
i must install an old old old ml370 server...
I must create a RAID 5 with my 4 SCSI disk.
I need a SmartStart disk for create it or a Floppy Disk called "Array configuration Tool". I don't find it on the hp website...:mad::mad::mad:
Anyone have it??
Thanks in advance.
Zio (0 Replies)
Discussion started by: Zio Bill
0 Replies
4. Solaris
Hi Peeps,
Can anyone help me an EFI lablel on a 3510 raid array that I cannot get rid of, format -e and label just asks you if you want to label it. Want an SMI label writing to it.
Anyone got any ideas on how to remove the EFI label?
Thanks in advance
Martin (2 Replies)
Discussion started by: callmebob
2 Replies
5. Emergency UNIX and Linux Support
One of my very old drive farm servers had an OS fault and can't boot now but I'd like to restore some files from it. I tried booting Ubuntu from a CD, but it couldn't see the drives -- possibly because they're RAIDed together. Is there a good way to get at my files?
The data in question is a... (2 Replies)
Discussion started by: CRGreathouse
2 Replies
6. Red Hat
Dear all ,
i ve configured raid 0 in redhat machine(VM ware), by following steps:
#mdadm -C /dev/md0 -l 0 -n 2 /dev/sdb1 /dev/sdc1
#mkfs.ext3 /dev/md0
#mdadm --detail --scan --config=mdadm.conf >/etc/mdadm.conf
then
mounted the/dev/md0 device and also added a entry in fstab.
how... (2 Replies)
Discussion started by: sriniv666
2 Replies
7. Debian
I am installing a Debian Server on a:
HP Proliant DL380 G4
Dual CPU's 3.20 ghz / 800 mhz / 1MB L2
5120 MB RAM
6 hard disks on HP Smart Array 6i controller (36.4 GB Ultra320 SCSI HD each)
I will be using this server to capture VHS video, encode, compress, cut, edit, make DVD's, rip... (0 Replies)
Discussion started by: Marcus Aurelius
0 Replies
8. What is on Your Mind?
No rest for the weary, a Revive Ad Server I am responsible for experienced a MySQL injection attack due to a vulnerability uncovered in the past few months. I was busy developing Vue.js code for the forums and thought to myself "I will get around to upgrading to Revive 4.2.0 (supposedly the... (0 Replies)
Discussion started by: Neo
0 Replies
LEARN ABOUT FREEBSD
hpt27xx
HPT27XX(4) BSD Kernel Interfaces Manual HPT27XX(4)
NAME
hpt27xx -- HighPoint RocketRAID 27xx SAS 6Gb/s HBA card driver
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device hpt27xx
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
hpt27xx_load="YES"
DESCRIPTION
The hpt27xx driver provides support for HighPoint's RocketRAID 27xx based RAID controller.
These devices support SAS disk drives and provide RAID0 (striping), RAID1 (mirroring), and RAID5 functionality.
HARDWARE
The hpt27xx driver supports the following SAS controllers:
o HighPoint's RocketRAID 271x series
o HighPoint's RocketRAID 272x series
o HighPoint's RocketRAID 274x series
o HighPoint's RocketRAID 276x series
o HighPoint's RocketRAID 278x series
NOTES
The hpt27xx driver only works on the i386 and amd64 platforms as it requires a binary blob object from the manufacturer which they only sup-
ply for these platforms. The hpt27xx driver does not work on i386 with pae(4) enabled.
SEE ALSO
kld(4), kldload(8), loader(8)
HISTORY
The hpt27xx device driver first appeared in FreeBSD 10.0.
AUTHORS
The hpt27xx device driver was written by HighPoint Technologies, Inc.. This manual page was written by Xin LI <delphij@FreeBSD.org> for
iXsystems, Inc.
BSD
December 28, 2011 BSD