Thanks for the advice above, it got me further along but I've run into another wall or two. Here's where I'm at so far
The first problem is I can't get the IF statement to work no matter where I put quotes, parens, brackets, or curly brackets. Also switching -eg for =, ==, or / makes no difference. I get either a 'too many parameters on line 16" error or it drops right through and declares every file unique when 10 out of 20 are duplicates.
Second problem is I have a file named 'space test dupe10.jpg' that I named to see how it would handle spaces in file names. I have a simplified version of the script (no IF statement) that just echoes the variables as it increments through them, and it appears to treat space, test, and dupe10.jpg as 3 different files.
This isn't a life or death situation so I greatly appreciate any and all advice. I'm just updating an electronic picture frame that hangs on the living room wall and runs for 4 hrs per night which makes adding pictures a pain since it has to be done while it's on. With this script I can put the pics on my NAS and they'll get copied over when the frame boots. I can do that now but duplicate file names are a concern. I made this thing before you could buy them, from instructions in a physical popular mechanics magazine. 15 or so years and several thousand pics later and you can imagine how many times my wife (a photography hobbyist no less) has tried to load "flowers.jpg" on it.
Greetings -
I am a newbie in shell scripts. I have been thru the whole forum but there has been no similar query posed.
The objective of my system is to have a unified filebase system. I am using RSync to synchronise files between the location & central server with both of them having the... (4 Replies)
I would like to know how to compare a listing of directories that begin with the same four numbers ie.
/1234cat
/1234tree
/1234fish
and move all these directories into one directory
Thanks in advance (2 Replies)
ok i asked around to a few ppl and they said to use sed or awk to do what i want.. but i cant figure out how to use it like that..
anyway i have a text file that is 10k lines long.. i need to move text from the end of a line after the ? and move it to the front of the line then add a | after it.... (3 Replies)
I'm rather new to scripting, and despite my attempts at finding/writing a script to do what I need, I have not yet been successful.
I have a file named "list.txt" of arbitrary length with contents in the following format:
/home/user/Music/file1.mp3
/home/user/Music/file2.mp3... (21 Replies)
My input file is multiline file and I am writing a script to search for a pattern and move the line with the pattern and the next line to the end of the file. Since I am trying to learn awk, I thought I would try it.
My input looks like the following:
D #testpoint 1
510.0
D #testpoint2 ... (5 Replies)
Hello all.
I am new to this forum (and somewhat new to UNIX / LINUX - I started using ubuntu 1 year ago).:b:
I have the following problem that I have not been able to figure out how to take care of and I was wondering if anyone could help me out.:confused:
I have all of my music stored in... (7 Replies)
Hi there,
I am having trouble with a script I have written, which is designed to search through a directory for a header and payload file, retrieve a string from both filenames, compare this string and if it matches make a backup of the two files then move them to a different directory for... (1 Reply)
Hi,
Anybody help me to write a Shell Script
Get the latest file from the file list based on created and then move to the target directory.
Tried with the following script: got error.
A=$(ls -1dt $(find "cveit/local_ftp/reflash-parts" -type f -daystart -mtime -$dateoffset) | head... (2 Replies)
Hi
In directory /mnt/upload I have about 100 000 files (*.png) that have been created during the last six months. Now I need to move them to right folders. eg:
file created on 2014-10-10 move to directory /mnt/upload/20141010
file created on 2014-11-11 move to directory /mnt/upload/20141111... (6 Replies)
Shell script logic
Hi
I have 2 input files like with file 1 content as (file1)
"BRGTEST-242" a.txt "BRGTEST-240" a.txt "BRGTEST-219" e.txt
File 2 contents as fle(2)
"BRGTEST-244" a.txt "BRGTEST-244" b.txt "BRGTEST-231" c.txt "BRGTEST-231" d.txt "BRGTEST-221" e.txt
I want to get... (22 Replies)
Discussion started by: pottic
22 Replies
LEARN ABOUT DEBIAN
raidfile-config
RAIDFILE-CONFIG(8) Box Backup RAIDFILE-CONFIG(8)NAME
raidfile-config - Configure Box Backup's RAID files
SYNOPSIS
raidfile-config config-dir blocksize dir1 [dir2 [dir3]]
DESCRIPTION
raidfile-config creates a raidfile.conf file for Box Backup. This file holds information about the directories used to store backups in.
Box Backup supports userland RAID, in a restricted RAID5 configuration, where 3 and only 3 'drives' are supported. You can read more about
RAID5 (and other RAID-levels) here[1].
Parameters
The parameters are as follows:
config-dir
The directory path where configuration files are located. Usually this is /etc/box. raidfile.conf will be written in this directory.
blocksize
The block size used for file storage in the system, in bytes. Using a multiple of the file system block size is a good strategy.
Depending on the size of the files you will be backing up, this multiple varies. Of course it also depends on the native block size of
your file system.
dir1
The first directory in the built-in RAID array.
dir2
The second directory in the built-in RAID array. If you are not using the built-in RAID functionality, this field should be ignored.
You should not use the built-in RAID if you have a hardware RAID solution or if you're using another type of software RAID (like md on
Linux).
dir3
The third directory in the built-in RAID array. The same notes that apply to dir2 also apply to dir3.
Note that there are currently no way to add multiple disk sets to the raidfile.conf file using command line tools, etc. See
raidfile.conf(5) for details on adding more disks.
BUGS
If you find a bug in Box Backup, and you want to let us know about it, join the mailing list[2], and send a description of the problem
there.
To report a bug, give us at least the following information:
o The version of Box Backup you are running
o The platform you are running on (hardware and OS), for both client and server.
o If possible attach your config files (bbstored.conf, bbackupd.conf) to the bug report.
o Also attach any log file output that helps shed light on the problem you are seeing.
o And last but certainly not least, a description of what you are seeing, in as much detail as possible.
FILES
raidfile-config generates the raidfile.conf(5) file.
SEE ALSO bbstored-config(8), bbstored.conf(5), raidfile.conf(5)AUTHORS
Ben Summers
Per Thomsen
James O'Gorman
NOTES
1. here
http://en.wikipedia.org/wiki/Redundant_array_of_independent_disks#RAID_5
2. mailing list
http://lists.warhead.org.uk/mailman/listinfo/boxbackup
Box Backup 0.11 10/28/2011 RAIDFILE-CONFIG(8)