Hi,
How do I get my working directory always shown in the unix editor? i.e if I am now at /Home/abc/xyz/, I want to see this absolute path displayed ( and now only display when I type pwd).
thanks for the kind help.
Regrads (3 Replies)
I am trying to obtain the file name (not including sub file name), however, I still cannot have the string output. :(
2 existed files at /tmp, AAA.new and BBB.last
Originally, the output result is needed to be shown as follows,
ex:
SYSTEM NEW LAST
===================
01 ... (8 Replies)
Hi,
On solaris 10, t5120,
I don't understand what are the last 2 file systems
so last 2 file systems what are they, why are they getting shown and also confused why the swap is shown so many times and different size when I set it to 16 G at the time of installing solaris 10. ( rest... (3 Replies)
Hello,
This is a 2 node sun cluster 3.2 on solaris 10(x86)
I am using an unique ~512M disk (c0d1) on each node and slice 6 on this disk for globaldevices. While everything looks like fine, the 'Fail' is bothering me.
@ tommy_sun1
@tommy_sun
-bash-3.00# cldevice refresh... (10 Replies)
Hi All,
I am having knowledge on some basics of ssh and wanted to know what are the public keys and how can we create and implement it in connecting server.
Please provide the information for the above, it would be helpful for me.
Thanks,
Ravindra (1 Reply)
Hi
I am using the dd command on solaris 10 and the output doesn't include the MB/s statistic that you get in Linux,
is this not available or am I missing a switch of some sort
#dd if=/dev/urandom of=/perf_test/file.txt bs=1048576 count=500
0+500 records in
0+500 records out (2 Replies)
I'm currently running a CUPS server and it shows the printers on other computers just fine, but after a while they disappear. I found out, that restarting /etc/init.d/cups-browsed fixes the problem (for about 15min).
When the printers disappear, the cups-browsed service is still running, so I... (0 Replies)
Discussion started by: Gajeela
0 Replies
LEARN ABOUT SUSE
ifndp-proxy
IFNDP-PROXY(5) Network configuration IFNDP-PROXY(5)NAME
ifndp-proxy[-<interface name>] - IPv6 NDP and IPv4 ARP proxy entries
SYNOPSIS
/etc/sysconfig/network/ifndp-proxy
/etc/sysconfig/network/ifndp-proxy-<interface name>
DESCRIPTION
These files contain IPv6 NDP and IPv4 ARP proxy settings, that should be applied using the ip neigh add proxy command documented in the
ip(8) manual page that provides a common interface for IPv4 and IPv6.
The NDP/ARP proxy is required, e.g. when IP addresses from the same subnet have to be used on the interface of the host as well as on
interfaces behind a (tunnel) interface and using a bridge is not an option.
Don't forget to enable forwarding and the NDP/ARP proxy by setting
net.ipv6.conf.<all|default|interface name>.proxy_ndp = 1
net.ipv6.conf.<all|default|interface name>.forwarding = 1
and/or
net.ipv4.conf.<all|default|interface name>.proxy_arp = 1
net.ipv4.conf.<all|default|interface name>.forwarding = 1
or
net.ipv4.ip_forward = 1
either as global all setting in the /etc/sysctl.conf file or using the ifsysctl(5) files, that allow per-interface setup.
Forwarding can be also enabled in the /etc/sysconfig/sysctl file using the IP_FORWARD and IPV6_FORWARD variables.
The proxy entries are added and deleted using the if-{up|down}.d/ndp-proxy script, every time after an involved interface has been set
up or down.
SYNTAX
The format of the ifndp-proxy file is:
<address> <address interface> <proxy interface list>
The format of the ifndp-proxy-<address interface> file is same to above, but allows also to omit the address interface by using a "-" as
placeholder inside of the file, because it is already available in the file name:
<address> <address interface | -> <proxy interface list>
Lines beginning with # and blank lines are ignored.
Each line defines to add a proxy NDP/ARP entry with the address of or behind address interface to all interfaces in the proxy interface
list.
EXAMPLES
Let's assume, your machine is connected via eth0 to a switch with the networks 2001:db8:abba::/64 and 192.168.100.1/24 and is using the IP
address 1 itself. You'd like to use the addresses 11 and 12 e.g. for virtual machines behind the tap1 and tap2 interface, that is:
2001:db8:abba::1/64 -- local eth0 address
2001:db8:abba::11/64 -- address behind tap1
2001:db8:abba::12/64 -- address behind tap2
192.168.100.1/24 -- local eth0 address
192.168.100.11/24 -- address behind tap1
192.168.100.12/24 -- address behind tap2
then set up the following entries in the ifndp-proxy file:
2001:db8:abba::1 eth0 tap1 tap2
2001:db8:abba::11 tap1 eth0 tap2
2001:db8:abba::12 tap2 eth0 tap1
192.168.100.1 eth0 tap1 tap2
192.168.100.11 tap1 eth0 tap2
192.168.100.12 tap2 eth0 tap1
additionally to the routing entries in the routes or ifroute-<interface name> files.
BUGS
Please report bugs at <https://bugzilla.novell.com/>
AUTHOR
Marius Tomaschewski <mt@suse.de>
SEE ALSO ifup(8)ifcfg(5)ifsysctl(8)sysconfig December 2009 IFNDP-PROXY(5)