ALOM BOOTMON v1.5.4
ALOM Build Release: 008
Reset register: e0000000 EHRS ESRS LLRS
ALOM POST 1.0
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Memory Parity Test
Memory Parity Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
SC Alert: CRITICAL ALARM is set
SC Alert: SC System booted.
Sun(tm) Advanced Lights Out Manager 1.5.4 ()
Full VxDiag Tests
BASIC TOD TEST
Read the TOD Clock: SAT JAN 01 00:00:14 2000
Wait, 1 - 3 seconds
Read the TOD Clock: SAT JAN 01 00:00:16 2000
BASIC TOD TEST, PASSED
ETHERNET CPU LOOPBACK TEST
50 BYTE PACKET - a 0 in field of 1's.
50 BYTE PACKET - a 1 in field of 0's.
900 BYTE PACKET - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED
Full VxDiag Tests - PASSED
Status summary - Status = 7FFF
VxDiag - - PASSED
POST - - PASSED
LOOPBACK - - PASSED
I2C - - PASSED
EPROM - - PASSED
FRU PROM - - PASSED
ETHERNET - - PASSED
MAIN CRC - - PASSED
BOOT CRC - - PASSED
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC850 - - PASSED
sc>
sc> showlogs
Log entries since JAN 01 00:00:15
----------------------------------
JAN 01 00:00:15 : 00060021: "CRITICAL ALARM is set"
JAN 01 00:00:15 : 00060003: "SC System booted."
JAN 01 00:00:24 : 00060000: "SC Login: User admin Logged on."
sc> poweron
Warning: the poweron command is being ignored because the password for admin is not set.
Setting password for admin.
New password: *********
Re-enter new password: *********
sc> poweron
sc> showlogs
Log entries since JAN 01 00:00:15
----------------------------------
JAN 01 00:00:15 : 00060021: "CRITICAL ALARM is set"
JAN 01 00:00:15 : 00060003: "SC System booted."
JAN 01 00:00:24 : 00060000: "SC Login: User admin Logged on."
JAN 01 00:01:19 : 00040001: "SC Request to Power On Host."
sc> poweroff
Host system power is already off
sc>
we hv a big enviroment networked.
we use squid proxy.
access allowed by src address previously.
we have win2000 network with ads.
my requirement is the proxy should allow domain users only for access.
how can i map my windows userdatabase with squid
is there any thing specific which has 2 b... (1 Reply)
Hi, I'm a newbie.
I need help on my first assignment in UNIX.
1. How do I determine the number of non-empty directories?
I was told to create a variable ARCHIVE, which points to the directory that contains the archive of the messages. But I'm so dumb and I don't even know how to do this.
2. In... (1 Reply)
Hi every one
I have got very very bad Email, My question is:
How can I get all information about that f*** Email, I do mean
IP,reall name, Adress, user name, password etc... I wonder if there is any program or website that I can see that email, help me please
When I used windows Xp(old... (2 Replies)
I have a list of variables: ss1, ss5, ss6, ss8, st2 etc. (these values are not fixed, configurable). Now, I have assigned ss5=”test”. And I want to search in the list for the string “test” to know which variable is having the value “test”. Can u pls tell me how to do this? (10 Replies)
Hi,
I need your help guys. I have two data files, namely 101.amberized.pdb & 101.pdb .
Now I want to replace the whole 3rd column of 101.amberized.pdb with the 3rd column of 101.pdb file. How do I do it in shell?
Thanks in advance
Parimal (11 Replies)
When i run this command, everything is ok. The file can be email and attached but soon after i download the file, the file cant be read. It's seem corrupted. Totally cant be read although i'm using context or wordfile. Original file generated at ek_bkup/alert/tbspace_datafile.log is OK.....
... (7 Replies)
I have this code:
#!/bin/sh
awk 'BEGIN
NR == 2
repl = "PHI"
$4 = repl
print $0 'dryloop.txt
and this code:
#!/bin/sh
sed -e '1s/\|$/\|COMID\|/g' -e 's/^087.*$/&PHI\|g' hl.dsldryloop > textdry.txt
My code won't work. I want to change the COMID of lines starting with 087 .
this is my... (15 Replies)
Greetings,
I hope my post finds you all OK,
I have a Netra240 server in an HLR inside a wireless CDMA Exchange, it works as a Hard Disk Unit (HDU) as shown in Local Management Terminal (LMT) as show in the picture 1 attached.
The power went down because of a power failure in main UPS, when... (2 Replies)
Discussion started by: Sharista
2 Replies
LEARN ABOUT DEBIAN
fence_alom
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)NAME
fence_alom - Fence agent for Sun ALOM
DESCRIPTION
fence_alom is an I/O Fencing agent which can be used with ALOM connected machines.
fence_alom accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent.
fence_alom can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.sun.com
PARAMETERS -o, --action=<action>
Fencing Action (Default Value: reboot)
-a, --ip=<ip>
IP Address or Hostname This parameter is always required.
-l, --username=<name>
Login Name This parameter is always required.
-p, --password=<password>
Login password or passphrase
-S, --password-script=<script>
Script to retrieve password
-x, --ssh
SSH connection (Default Value: true)
-k, --identity-file=<filename>
Identity file for ssh
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-u, --ipport=<port>
TCP port to use for connection with device
-v, --verbose
Verbose mode
-D, --debug-file=<debugfile>
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--power-timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
--shell-timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--login-timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
--delay
Wait X seconds before fencing is started (Default Value: 0)
--retry-on
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
monitor
Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).
metadata
The operational behavior of this is not known.
STDIN PARAMETERS
action Fencing Action (Default Value: reboot)
ipaddr IP Address or Hostname This parameter is always required.
login Login Name This parameter is always required.
passwd Login password or passphrase
passwd_script
Script to retrieve password
secure SSH connection (Default Value: true)
identity_file
Identity file for ssh
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ipport TCP port to use for connection with device
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
fence_alom (Fence Agent) 2009-10-20 FENCE_AGENT(8)