ALOM BOOTMON v1.5.4
ALOM Build Release: 008
Reset register: e0000000 EHRS ESRS LLRS
ALOM POST 1.0
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Memory Parity Test
Memory Parity Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
SC Alert: CRITICAL ALARM is set
SC Alert: SC System booted.
Sun(tm) Advanced Lights Out Manager 1.5.4 ()
Full VxDiag Tests
BASIC TOD TEST
Read the TOD Clock: SAT JAN 01 00:00:14 2000
Wait, 1 - 3 seconds
Read the TOD Clock: SAT JAN 01 00:00:16 2000
BASIC TOD TEST, PASSED
ETHERNET CPU LOOPBACK TEST
50 BYTE PACKET - a 0 in field of 1's.
50 BYTE PACKET - a 1 in field of 0's.
900 BYTE PACKET - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED
Full VxDiag Tests - PASSED
Status summary - Status = 7FFF
VxDiag - - PASSED
POST - - PASSED
LOOPBACK - - PASSED
I2C - - PASSED
EPROM - - PASSED
FRU PROM - - PASSED
ETHERNET - - PASSED
MAIN CRC - - PASSED
BOOT CRC - - PASSED
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC850 - - PASSED
sc>
sc> showlogs
Log entries since JAN 01 00:00:15
----------------------------------
JAN 01 00:00:15 : 00060021: "CRITICAL ALARM is set"
JAN 01 00:00:15 : 00060003: "SC System booted."
JAN 01 00:00:24 : 00060000: "SC Login: User admin Logged on."
sc> poweron
Warning: the poweron command is being ignored because the password for admin is not set.
Setting password for admin.
New password: *********
Re-enter new password: *********
sc> poweron
sc> showlogs
Log entries since JAN 01 00:00:15
----------------------------------
JAN 01 00:00:15 : 00060021: "CRITICAL ALARM is set"
JAN 01 00:00:15 : 00060003: "SC System booted."
JAN 01 00:00:24 : 00060000: "SC Login: User admin Logged on."
JAN 01 00:01:19 : 00040001: "SC Request to Power On Host."
sc> poweroff
Host system power is already off
sc>
we hv a big enviroment networked.
we use squid proxy.
access allowed by src address previously.
we have win2000 network with ads.
my requirement is the proxy should allow domain users only for access.
how can i map my windows userdatabase with squid
is there any thing specific which has 2 b... (1 Reply)
Hi, I'm a newbie.
I need help on my first assignment in UNIX.
1. How do I determine the number of non-empty directories?
I was told to create a variable ARCHIVE, which points to the directory that contains the archive of the messages. But I'm so dumb and I don't even know how to do this.
2. In... (1 Reply)
Hi every one
I have got very very bad Email, My question is:
How can I get all information about that f*** Email, I do mean
IP,reall name, Adress, user name, password etc... I wonder if there is any program or website that I can see that email, help me please
When I used windows Xp(old... (2 Replies)
I have a list of variables: ss1, ss5, ss6, ss8, st2 etc. (these values are not fixed, configurable). Now, I have assigned ss5=”test”. And I want to search in the list for the string “test” to know which variable is having the value “test”. Can u pls tell me how to do this? (10 Replies)
Hi,
I need your help guys. I have two data files, namely 101.amberized.pdb & 101.pdb .
Now I want to replace the whole 3rd column of 101.amberized.pdb with the 3rd column of 101.pdb file. How do I do it in shell?
Thanks in advance
Parimal (11 Replies)
When i run this command, everything is ok. The file can be email and attached but soon after i download the file, the file cant be read. It's seem corrupted. Totally cant be read although i'm using context or wordfile. Original file generated at ek_bkup/alert/tbspace_datafile.log is OK.....
... (7 Replies)
I have this code:
#!/bin/sh
awk 'BEGIN
NR == 2
repl = "PHI"
$4 = repl
print $0 'dryloop.txt
and this code:
#!/bin/sh
sed -e '1s/\|$/\|COMID\|/g' -e 's/^087.*$/&PHI\|g' hl.dsldryloop > textdry.txt
My code won't work. I want to change the COMID of lines starting with 087 .
this is my... (15 Replies)
Greetings,
I hope my post finds you all OK,
I have a Netra240 server in an HLR inside a wireless CDMA Exchange, it works as a Hard Disk Unit (HDU) as shown in Local Management Terminal (LMT) as show in the picture 1 attached.
The power went down because of a power failure in main UPS, when... (2 Replies)
Discussion started by: Sharista
2 Replies
LEARN ABOUT CENTOS
test::memory::cycle
Cycle(3) User Contributed Perl Documentation Cycle(3)NAME
Test::Memory::Cycle - Check for memory leaks and circular memory references
VERSION
Version 1.04
SYNOPSIS
Perl's garbage collection has one big problem: Circular references can't get cleaned up. A circular reference can be as simple as two
reference that refer to each other:
my $mom = {
name => "Marilyn Lester",
};
my $me = {
name => "Andy Lester",
mother => $mom,
};
$mom->{son} = $me;
"Test::Memory::Cycle" is built on top of "Devel::Cycle" to give you an easy way to check for these circular references.
use Test::Memory::Cycle;
my $object = new MyObject;
# Do stuff with the object.
memory_cycle_ok( $object );
You can also use "memory_cycle_exists()" to make sure that you have a cycle where you expect to have one.
FUNCTIONS
"memory_cycle_ok( $reference, $msg )"
Checks that $reference doesn't have any circular memory references.
"memory_cycle_exists( $reference, $msg )"
Checks that $reference does have any circular memory references.
"weakened_memory_cycle_ok( $reference, $msg )"
Checks that $reference doesn't have any circular memory references, but unlike "memory_cycle_ok" this will also check for weakened cycles
produced with Scalar::Util's "weaken".
"weakened_memory_cycle_exists( $reference, $msg )"
Checks that $reference does have any circular memory references, but unlike "memory_cycle_exists" this will also check for weakened cycles
produced with Scalar::Util's "weaken".
AUTHOR
Written by Andy Lester, "<andy @ petdance.com>".
BUGS
Please report any bugs or feature requests to "bug-test-memory-cycle at rt.cpan.org", or through the web interface at
<http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Test-Memory-Cycle>. I will be notified, and then you'll automatically be notified of
progress on your bug as I make changes.
SUPPORT
You can find documentation for this module with the perldoc command.
perldoc Test::Memory::Cycle
You can also look for information at:
o AnnoCPAN: Annotated CPAN documentation
<http://annocpan.org/dist/Test-Memory-Cycle>
o CPAN Ratings
<http://cpanratings.perl.org/d/Test-Memory-Cycle>
o RT: CPAN's request tracker
<http://rt.cpan.org/NoAuth/Bugs.html?Dist=Test-Memory-Cycle>
o Search CPAN
<http://search.cpan.org/dist/Test-Memory-Cycle>
ACKNOWLEDGEMENTS
Thanks to the contributions of Stevan Little, and to Lincoln Stein for writing Devel::Cycle.
COPYRIGHT
Copyright 2006, Andy Lester, All Rights Reserved.
You may use, modify, and distribute this package under the same terms as Perl itself.
perl v5.16.3 2006-08-07 Cycle(3)