Hello,
I have just installed ubuntu 16.04 into my pc.
Locally everything works fine, it takes data from internet, I am also able to connect to apache in the same local network. When I try to reach from mobile network, I can't establish ssh, apache site is not displaying in my browser etc.
Ifconfig:
interfaces:
I also set static ip as DMZ host in router. To be sure I rebooted both pc and router but nothing changes.
Hi,
How do I get my working directory always shown in the unix editor? i.e if I am now at /Home/abc/xyz/, I want to see this absolute path displayed ( and now only display when I type pwd).
thanks for the kind help.
Regrads (3 Replies)
I am trying to obtain the file name (not including sub file name), however, I still cannot have the string output. :(
2 existed files at /tmp, AAA.new and BBB.last
Originally, the output result is needed to be shown as follows,
ex:
SYSTEM NEW LAST
===================
01 ... (8 Replies)
Hi,
On solaris 10, t5120,
I don't understand what are the last 2 file systems
so last 2 file systems what are they, why are they getting shown and also confused why the swap is shown so many times and different size when I set it to 16 G at the time of installing solaris 10. ( rest... (3 Replies)
Hello,
This is a 2 node sun cluster 3.2 on solaris 10(x86)
I am using an unique ~512M disk (c0d1) on each node and slice 6 on this disk for globaldevices. While everything looks like fine, the 'Fail' is bothering me.
@ tommy_sun1
@tommy_sun
-bash-3.00# cldevice refresh... (10 Replies)
Hi All,
I am having knowledge on some basics of ssh and wanted to know what are the public keys and how can we create and implement it in connecting server.
Please provide the information for the above, it would be helpful for me.
Thanks,
Ravindra (1 Reply)
Hi
I am using the dd command on solaris 10 and the output doesn't include the MB/s statistic that you get in Linux,
is this not available or am I missing a switch of some sort
#dd if=/dev/urandom of=/perf_test/file.txt bs=1048576 count=500
0+500 records in
0+500 records out (2 Replies)
I'm currently running a CUPS server and it shows the printers on other computers just fine, but after a while they disappear. I found out, that restarting /etc/init.d/cups-browsed fixes the problem (for about 15min).
When the printers disappear, the cups-browsed service is still running, so I... (0 Replies)
Discussion started by: Gajeela
0 Replies
LEARN ABOUT DEBIAN
ifscheme-mapping
IFSCHEME(8) Commands IFSCHEME(8)NAME
ifscheme - scheme control for network interfaces
SYNOPSIS
ifscheme [-v] [[-s] newscheme]
mapping <interface> script ifscheme-mapping
DESCRIPTION
ifscheme allows you to change network configuraton schemes or query the current scheme. It integrates with the ifup(8) command and inter-
faces(5). For example, you might use this program to configure a "home" scheme and a "work" scheme for a network device on a laptop. When
you move between home and work, a simple command can reconfigure your networking.
If you run the program with no parameters, it will tell what the current network scheme is.
The ifscheme-mapping utility is used to tell the ifup and ifdown utilities about the current scheme.
OPTIONS -v
--verbose
Run in verbose mode. This is passed in to the ifup and ifdown programs as well.
-l
--list list all schemes available/defined in /etc/network/interfaces.
newscheme
-s newscheme
--scheme newscheme
Change to a new network configuration scheme. When the scheme is changed, network interfaces that were using the old scheme will be
taken down and brought back up to use the new configuration scheme. -s or --scheme are mandatory if newscheme begins with a -.
CONFIGURATION
To make the program do anything useful when a scheme is selected, you must edit /etc/network/interfaces to add a mapping for the interface
(or interfaces) that can be controlled on a per-scheme basis. Suppose you want to control eth0 in this way. You might have an existing eth0
configuraton in there, such as:
auto eth0
iface eth0 inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
To change this so you can chose between static routing and dhcp, replace it with the following (it helps to ifdown the interface first).
auto eth0
mapping eth0
script ifscheme-mapping
iface eth0-home inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
iface eth0-work inet dhcp
Now if you run "ifscheme home" and ifup the interface, you'll get the eth0-home configuration stanza. If you run "ifscheme work", it will
be changed to the eth0-work stanza. You can add additional stanzas as desired, but the label must always be of the form <hardware inter-
face>-<scheme name>.
If you have a second interface (perhaps a wireless network card on eth1), you can duplicate the above for that interface, changing the eth0
and the configuration details as appropriate, but remember to add an iface stanza for every scheme name for the second interface.
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/scheme
the current scheme
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
BUGS
All schemed interfaces will have the same scheme.
Any schemed interface which does not have an entry for the current scheme and is not configured when the scheme is changed will not be suc-
cessfully configured when it is brought up.
SEE ALSO interfaces(5)ifup(8)ifdown(8)DISTRIBUTION
Redistribution is subject to the GNU public license.
AUTHORS
Joey Hess <joey@kitenet.net>, Peter Wilson <pwilson@cs.hmc.edu>
IFSCHEME(8)