I have solaris11 running in a kvm virtual machine,network works fine.
I can configure it with dhcp or static.
Of course packet forward in kvm machine is enabled
The solaris11 machine can ping external network.
I have setup a solaris10 zone inside the vm
the solaris 10 zone use exclusive ip and physical net is vnic0
I use those commands
Code:
dladm create-vnic vnic0 -l net0
Code:
zonecfg -z solaris10
set ip-type=exclusive
add net
set physical=vnic0
end
commit
exit
Now zlogin...
Code:
zlogin -z solaris10
The interface is here
Code:
ifconfig vnic0
I can configure ip..
Code:
ifconfig vnic0 192.168.0.11 netmask 255.255.255.0 up
Code:
route add default 192.168.0.1
On solaris11 routeadm say ipforward is enabled
Code:
routeadm
Configuration Current Current
Option Configuration System State
---------------------------------------------------------------
IPv4 routing enabled enabled
IPv6 routing disabled disabled
IPv4 forwarding enabled enabled
IPv6 forwarding disabled disabled
Routing services "route:default ripng:default"
Routing daemons:
STATE FMRI
disabled svc:/network/routing/legacy-routing:ipv4
disabled svc:/network/routing/legacy-routing:ipv6
disabled svc:/network/routing/ndp:default
disabled svc:/network/routing/ripng:default
online svc:/network/routing/route:default
and even ipadm say enabled
Code:
ipadm show-ifprop net0|grep forw
net0 forwarding ipv4 rw on on off on,off
what is the problem?
The solaris zone can ping ONLY the solaris11 host..not the internal network(192.168.0.0/24) not internet!
What I miss?
Hi,
I am involved in a project on Debian. One of my requirement is to route an IP packet in my application to a proxy server and receive the reply from the proxy server as an IP packet. My application handles data at the IP frame level. My application creates an IP packet(with all the necessary... (0 Replies)
Exercise:
Protection of WEB and DNS servers using the context-free rules for packet filtering:
- Protect your WEB-server, so that would be for him can be accessed by browsers, and could go to dns.
- Protect your primary DNS-server so that it could be to contact clients and secondary servers.... (1 Reply)
Hi all. Linux noob here.
I was hoping someone could help me with configuring some routing rules on my router, an Asus AC68.
The router is connected to two gateways, wan0_gateway and wan1_gateway.
I have rules set up in the router gui that will push all traffic from every IP other than my own... (0 Replies)
RHEL 7.0, IPV6
Scenario:
I have routed specific network using network scripts.
1. "ip -6 route show" shows that route has been added. ( with metric 1024)
2. Ping of the specific IP through that route is successful.
3. Now after few days, for some reason, we see that cache route appears for... (3 Replies)