10-23-2018
While {} \; runs a chmod for each file, the {} + collects the filenames and, when long enough, runs a chmod with the collected argument list.
Fewer invocations of chmod => greater speed.
This User Gave Thanks to MadeInGermany For This Post:
7 More Discussions You Might Find Interesting
1. HP-UX
Im trying to simply share a directory on one unix server and mount that share on a different unix server.
There is no "share" command like on sun. What is the command to create a share on HP-UX? (2 Replies)
Discussion started by: bski
2 Replies
2. IP Networking
Sometimes you get the tiger...but sometimes he get you and this latest home network “project” of mine has gnawed on me pretty badly. Perhaps you can offer some technical help. It will be heartily appreciated.
I have a small home network initially comprising two computers running Windows... (1 Reply)
Discussion started by: Annatar
1 Replies
3. UNIX for Advanced & Expert Users
Hi,
Im running 32-bit solaris on sparc. We have a NAS(Network attached drive), with its IP address, username and password.
I'd like to be able to mount it on the solaris machine, and unmount it.
The best possibility would be able to mount it simulataneously on 2 or more systems.
Please... (9 Replies)
Discussion started by: 0ktalmagik
9 Replies
4. Solaris
How to move home directory of NIS user from one system to another system in Solaris.
Thanks & Regards
Durgaprasad (1 Reply)
Discussion started by: durgaprasadr13
1 Replies
5. UNIX for Dummies Questions & Answers
Hi,
I have two machines. M1 and M2 and having a generic id catadm, these two machines having common mount of /u/catadm directory.
with this setup, ssh autologin is failing for me and asking me to enter password when i try autologin using this generc id from M1 to M2
catadm-M1$ ssh... (3 Replies)
Discussion started by: rbalaj16
3 Replies
6. Solaris
Hi,
I recently added a disk on a solaris 9 and I wanted to make it accessible for another machine, using the same name
here is what i did :
On the machine holding the internal disk
in vfstab i added the line
/dev/dsk/c1t1d0s4 /dev/rdsk/c1t1d0s4 /SHARED2 ufs 2 yes ... (2 Replies)
Discussion started by: zionassedo
2 Replies
7. Solaris
Hi,
I am having some NFS directory consistency problems with the below setup on a local (192.) network:
1. Different permissions (chmod) for the same NFS dir are reflected on different clients.
2. (more serious) an NFS dir created on client1 cannot be accessed on client2; this applies to some... (10 Replies)
Discussion started by: cosmojetz
10 Replies
LEARN ABOUT SUSE
runit-init
runit-init(8) System Manager's Manual runit-init(8)
NAME
init - a UNIX process no 1
SYNOPSIS
init [ 0 | 6 ]
DESCRIPTION
runit-init is the first process the kernel starts. If runit-init is started as process no 1, it runs and replaces itself with runit(8).
If runit-init is started while the system is up, it must be either called as init 0 or init 6:
init 0 tells the Unix process no 1 to shutdown and halt the system. To signal runit(8) the system halt request, runit-init removes all
permissions of the file /etc/runit/reboot (chmod 0), and sets the execute by owner permission of the file /etc/runit/stopit (chmod
100). Then a CONT signal is sent to runit(8).
init 6 tells the Unix process no 1 to shutdown and reboot the system. To signal runit(8) the system reboot request, runit-init sets the
execute by owner permission of the files /etc/runit/reboot and /etc/runit/stopit (chmod 100). Then a CONT signal is sent to
runit(8).
EXIT CODES
runit-init returns 111 on error, 0 in all other cases.
SEE ALSO
runit(8), runsvdir(8), runsvchdir(8), sv(8), runsv(8), chpst(8), utmpset(8), svlogd(8)
http://smarden.org/runit/
AUTHOR
Gerrit Pape <pape@smarden.org>
runit-init(8)