I just finished installing Solaris 5.8 and I tried to install StarOffice, it said I was out of room. Now I have a 3 gig HD and I THOUGHT that I gave 512 to swap and kept the rest for storage room.
How do I check how much room I have, how would I if I figured out I don't have enough room add... (5 Replies)
Hey,
haha i'm back! Just when i thought everythign was working fine and dandy i found out that i screwed up my partitions way back when i set teh computer up like 5 months ago...lol. SO! I have decided to format....jus tcause this is my learning computer and install RH9 or whatever the... (15 Replies)
Dear all,
I have a root partition which is 20 G in size. I have var and /tmp as seperate file systems. But this 20 G of root is not sufficeint.
I want to increase the size of the / partition.
Is there any way to increase with out down time.
my df -k output is
Filesystem ... (4 Replies)
Hello all, got kinda problem. Have two machines in LAN, one of them connected to Internet directly, another one must be forwarded through the first one. Masquerading works perfectly, but is not what is needed here. Both machines have public IP addresses, when the second machine is forwarded its... (0 Replies)
Hello guys,
I am using Solaris 10 x86 OS. While installing OS i have allocated entire 10 GB space to the root. Now i am not able to create new partition it says me "out of range" or "<cylinder number> not expected". Can someone please help me to allocated a default recommended space i.e 8GB or... (2 Replies)
Hi guys,
let me start by saying I appreciate your assistance always.
I was practicing how to encrypt partitions in my server. I encrypted an lvm partition using luks and when I tried to remove the partition using lvremove, I get this message
Logical volume vg10/lvol1 is used by another... (2 Replies)
I cannot access or boot from my C drive. I'm running Zorin 9 and the drive is a Samsung SSD. The disk was encrypted on install, and that has not given me any problems before.
When I start the system it gets to the memory test page, and does not then load the password prompt, which it used to.... (1 Reply)
Dear Concern,
I am new in ubuntu. Is root user disable in ubuntu? Also, is os partition default in ubuntu? I don't find any feature to create customize mount point to install OS.
Below is my current OS partition.
amirislam@blnidapp03:~$ df -h
Filesystem Size Used... (1 Reply)
Discussion started by: makauser
1 Replies
LEARN ABOUT DEBIAN
acorn-fdisk
FDISK(8) BSD System Manager's Manual FDISK(8)NAME
acorn-fdisk -- partition editor for Acorn/RISC OS machines
SYNOPSIS
acorn-fdisk -h | --help | -v | --version
acorn-fdisk [-t scheme | --type scheme] -l | --list [device ...]
acorn-fdisk [-t scheme | --type scheme] -s | --size partition
acorn-fdisk [-t scheme | --type scheme] [device]
DESCRIPTION
The acorn-fdisk utility allows one to display or interactively edit partition tables for Acorn/RISC OS machines in various formats. Using
the PC/BIOS format, standard IBM PC (i386) partition tables can also be accessed. When no optional device is given, it defaults to /dev/hda
or /dev/sda.
The options are as follows:
-h | --help Display a short usage and exit immediately.
-l | --list Display the partition table(s) of all devices.
-s | --size Display the size of partition.
-t | --type Select the partitioning scheme to use. Valid schemes are:
EESOX Eesox SCSI on the Acorn machines.
ICSIDEFS ICS IDE.
Filecore/Linux Linux on Filecore. This uses the non-ADFS descriptor to point to the start of the disc to be partitioned. The
first two sectors contain a partition table to identify the Linux partitions contained within.
PC/BIOS PC/BIOS partitioning scheme. This consists of a partition table in the first sector of the disk which contains
both CHS and LBA values for the partitions. There can be up to four entries in the primary partition table.
One of these can be an extended partition containing up to four extra partitions.
PowerTec PowerTec SCSI on the Acorn machines.
Filecore/RISCiX RiscIX on Filecore.
-v | --version
Display the version of acorn-fdisk and exit immediately.
If neither -l | --list or -s | --size are given, the partition table of the given device will be edited interactively.
EXAMPLES
Display the default device's partition table on a PC:
acorn-fdisk --type PC/BIOS -l
Display the PC partition table of /dev/sda:
acorn-fdisk --type PC/BIOS --list /dev/sda
Display the size in blocks of the partition /dev/sda1:
acorn-fdisk --type PC/BIOS --size /dev/sda1
Edit the MBR partition table interactively:
acorn-fdisk --type PC/BIOS
Display the partition table of an MBR backed up to a file:
acorn-fdisk -t PC/BIOS -l mbrdump.bin
Display the size of the first partition on a device where the MBR would be restored from the backup file mbrdump.bin:
acorn-fdisk -t PC/BIOS -s mbrdump.bin1
AUTHORS
arm-fdisk was written by Russell King <rmk@arm.uk.linux.org> based on util-linux fdisk, which was written at least partially by
A. V. Le Blanc <LeBlanc@mcc.ac.uk>.
This manual page was written for the Debian system by
Thorsten Glaser <tg@debian.org> but may be used by others.
BSD October 2, 2010 BSD